f**********y 发帖数: 164 | 1 看了这篇文章,
http://www.real-world-physics-problems.com/physics-of-skiing.ht
其中讲到:
“A purely carved turn can be done with a ski that is flat on the snow or
tilted at an angle to the snow.”
如果ski是平的,purely carved turn半径(R_T)等于雪橇side cut radius(R_SC).
如果有立刃,角度为phi,purely carved turn半径(R_T)变小,
R_T = R_SC*cos(phi)
当然,实际上ski是平的确实作不出carving来,所以这样说好一点,立刃角度趋近于0的
时候,purely carved turn半径(R_T)等于雪橇side cut radius(R_SC). |
x****u 发帖数: 44466 | 2 老实说吧,和很多因素有关,雪道情况多半
【在 f**********y 的大作中提到】 : 看了这篇文章, : http://www.real-world-physics-problems.com/physics-of-skiing.ht : 其中讲到: : “A purely carved turn can be done with a ski that is flat on the snow or : tilted at an angle to the snow.” : 如果ski是平的,purely carved turn半径(R_T)等于雪橇side cut radius(R_SC). : 如果有立刃,角度为phi,purely carved turn半径(R_T)变小, : R_T = R_SC*cos(phi) : 当然,实际上ski是平的确实作不出carving来,所以这样说好一点,立刃角度趋近于0的 : 时候,purely carved turn半径(R_T)等于雪橇side cut radius(R_SC).
|
S********t 发帖数: 3431 | 3 你身上似乎看到当年的小菊。。。初出茅庐,有些自负又有些stubborn钻牛角尖。
【在 f**********y 的大作中提到】 : 看了这篇文章, : http://www.real-world-physics-problems.com/physics-of-skiing.ht : 其中讲到: : “A purely carved turn can be done with a ski that is flat on the snow or : tilted at an angle to the snow.” : 如果ski是平的,purely carved turn半径(R_T)等于雪橇side cut radius(R_SC). : 如果有立刃,角度为phi,purely carved turn半径(R_T)变小, : R_T = R_SC*cos(phi) : 当然,实际上ski是平的确实作不出carving来,所以这样说好一点,立刃角度趋近于0的 : 时候,purely carved turn半径(R_T)等于雪橇side cut radius(R_SC).
|
f**********y 发帖数: 164 | 4 找不到女朋友心里郁闷
【在 S********t 的大作中提到】 : 你身上似乎看到当年的小菊。。。初出茅庐,有些自负又有些stubborn钻牛角尖。
|
x****u 发帖数: 44466 | 5 靠,当年是因为某些新id自称滑过30多年雪,美国一个雪道30多km给刺激到了。。。
我老刚学打乒乓球时也觉得技术种类繁多秘技无数,5年后想想看只剩下一两项基本功
和基本动作了。。。
【在 S********t 的大作中提到】 : 你身上似乎看到当年的小菊。。。初出茅庐,有些自负又有些stubborn钻牛角尖。
|
h****w 发帖数: 236 | 6 !
【在 S********t 的大作中提到】 : 你身上似乎看到当年的小菊。。。初出茅庐,有些自负又有些stubborn钻牛角尖。
|
q*c 发帖数: 17993 | 7 嘿嘿,理工科生。。。
C is the drag coefficient, which can vary along with the speed of the skier.
But typical values range from 0.4 to 1.0
这个0.4 to 1.0从哪里得出来的?
【在 f**********y 的大作中提到】 : 看了这篇文章, : http://www.real-world-physics-problems.com/physics-of-skiing.ht : 其中讲到: : “A purely carved turn can be done with a ski that is flat on the snow or : tilted at an angle to the snow.” : 如果ski是平的,purely carved turn半径(R_T)等于雪橇side cut radius(R_SC). : 如果有立刃,角度为phi,purely carved turn半径(R_T)变小, : R_T = R_SC*cos(phi) : 当然,实际上ski是平的确实作不出carving来,所以这样说好一点,立刃角度趋近于0的 : 时候,purely carved turn半径(R_T)等于雪橇side cut radius(R_SC).
|
W**T 发帖数: 221 | 8
skier.
作为斑竹,你这种行径令人发指 --
那篇文章绝对是文科生写的, 并且其力学一定是音乐老师教的(也可能是希腊神话老
师教的)。 你竟然称之为理工科生 -- 太埋汰理工科生了。 建议连滑三十趟双黑蘑
菇,作为自惩。
lol。
【在 q*c 的大作中提到】 : 嘿嘿,理工科生。。。 : C is the drag coefficient, which can vary along with the speed of the skier. : But typical values range from 0.4 to 1.0 : 这个0.4 to 1.0从哪里得出来的?
|
w********o 发帖数: 1231 | 9 充分证明斑竹是 物理系 的学霸.
skier.
【在 q*c 的大作中提到】 : 嘿嘿,理工科生。。。 : C is the drag coefficient, which can vary along with the speed of the skier. : But typical values range from 0.4 to 1.0 : 这个0.4 to 1.0从哪里得出来的?
|
d*********e 发帖数: 3835 | 10 好大一道物理题分解成立体曲线的平面投影和基础学题分析就不是很复杂,简单回答就
是纯不纯和角度有直接关系 |