w******n
发帖数: 13172 | 1 刚去看了看专业改拍子的地方，好贵。weighting and balancing，一把要65刀。俺想
把两把改的完全一样，那就得2把都改，130刀。。。 |
K****D
发帖数: 30533 | 2 DIY. Costs about $5. Or if you need to buy a scale, then add a
one time fee of another $30.
【在 w******n 的大作中提到】
: 刚去看了看专业改拍子的地方，好贵。weighting and balancing，一把要65刀。俺想
: 把两把改的完全一样，那就得2把都改，130刀。。。
|
a****n
发帖数: 4734 | 3 算上手工，差不多这个价格了。其实简单的可以自己弄。 |
w******n
发帖数: 13172 | 4 如果想把拍头改重，很容易，加铅皮即可。俺是要把柄加重，很麻烦。而且一把改了，
另一把要完全match
【在 K****D 的大作中提到】
: DIY. Costs about $5. Or if you need to buy a scale, then add a
: one time fee of another $30.
|
K****D
发帖数: 30533 | 5 Lead tape under the original grip.
1) around the top of handle if the current grip size is right.
2) several vertical stripes if you need to increase the current
grip size.
【在 w******n 的大作中提到】
: 如果想把拍头改重，很容易，加铅皮即可。俺是要把柄加重，很麻烦。而且一把改了，
: 另一把要完全match
|
a*****3
发帖数: 10373 | 6 you can also put the lead on the handle.
【在 w******n 的大作中提到】
: 如果想把拍头改重，很容易，加铅皮即可。俺是要把柄加重，很麻烦。而且一把改了，
: 另一把要完全match
|
w******n
发帖数: 13172 | 7 the last thing I need is to increase the grip size
【在 K****D 的大作中提到】
: Lead tape under the original grip.
: 1) around the top of handle if the current grip size is right.
: 2) several vertical stripes if you need to increase the current
: grip size.
|
R****n
发帖数: 708 | 8 有这个钱还不如去vantage定做两把呢
【在 w******n 的大作中提到】
: 刚去看了看专业改拍子的地方，好贵。weighting and balancing，一把要65刀。俺想
: 把两把改的完全一样，那就得2把都改，130刀。。。
|
K****D
发帖数: 30533 | 9 Then either option 1 or ply off the grip bottom cap and insert
lead blocks or coins. Tuck up with cotton tightly.
【在 w******n 的大作中提到】
: the last thing I need is to increase the grip size
|
a*****3
发帖数: 10373 | 10 Put it inside or the bottom.
【在 w******n 的大作中提到】
: the last thing I need is to increase the grip size
|
|
|
w******n
发帖数: 13172 | 11 铅块在柄里面乱晃怎么办？
【在 K****D 的大作中提到】
: Then either option 1 or ply off the grip bottom cap and insert
: lead blocks or coins. Tuck up with cotton tightly.
|
K****D
发帖数: 30533 | 12 You are always 1 beat too slow ah, hehe.
The basic idea is the weight/balance customization can all be done
by yourself. It's not about how professionally it is done (no 痕迹，
looks smooth, etc.), that doesn't affect the playability. But do
pay attention to the weight/balance measurement. Be as accurate as
you can because that affects a lot...
【在 a*****3 的大作中提到】
: Put it inside or the bottom.
|
K****D
发帖数: 30533 | 13 "Tuck up with cotton tightly".
【在 w******n 的大作中提到】
: 铅块在柄里面乱晃怎么办？
|
a****n
发帖数: 4734 | 14 用棉花塞实，这个在tenniswarehouse和youtube的网站都有教学。
【在 w******n 的大作中提到】
: 铅块在柄里面乱晃怎么办？
|
w******n
发帖数: 13172 | 15 哪里有卖铅块的？
【在 K****D 的大作中提到】
: "Tuck up with cotton tightly".
|
a****n
发帖数: 4734 | |
K****D
发帖数: 30533 | 17 1) Buy lead stripes from any sports store and roll them up into a
block.
2) Find a bunch of 5 cents and tape them up in a stack.
【在 w******n 的大作中提到】
: 哪里有卖铅块的？
|
w******n
发帖数: 13172 | 18 好，准备回去试试。不过怎么把后盖打开？再合上？需要把整个grip都拿掉吗？我看TW
上画的很麻烦，还要大订书机什么的
【在 K****D 的大作中提到】
: 1) Buy lead stripes from any sports store and roll them up into a
: block.
: 2) Find a bunch of 5 cents and tape them up in a stack.
|
K****D
发帖数: 30533 | 19 You have to remove the original grip to see. You will slightly
damage the cap. Also not all models support this. You can always
do it with Head.
Disclaimer: I have never done this myself. Do it at your own risk,
haha.
TW
【在 w******n 的大作中提到】
: 好，准备回去试试。不过怎么把后盖打开？再合上？需要把整个grip都拿掉吗？我看TW
: 上画的很麻烦，还要大订书机什么的
|
w******n
发帖数: 13172 | 20 您整个一个大忽悠，忽悠完了说跟自己没关系。。。
【在 K****D 的大作中提到】
: You have to remove the original grip to see. You will slightly
: damage the cap. Also not all models support this. You can always
: do it with Head.
: Disclaimer: I have never done this myself. Do it at your own risk,
: haha.
:
: TW
|
|
|
K****D
发帖数: 30533 | 21 I personally would not ply the cap but will stick lead stripes around
the top of handle (under the grip of course). It won't look as nice
but I don't care.
【在 w******n 的大作中提到】
: 您整个一个大忽悠，忽悠完了说跟自己没关系。。。
|
w******n
发帖数: 13172 | 22 In addition to increase the grip size, this method also increase the swing
weight
【在 K****D 的大作中提到】
: I personally would not ply the cap but will stick lead stripes around
: the top of handle (under the grip of course). It won't look as nice
: but I don't care.
|
a****n
发帖数: 4734 | 23 大部分拍子只要撬开底盖就可以了，不用动grip. |
w******n
发帖数: 13172 | 24 good news
【在 a****n 的大作中提到】
: 大部分拍子只要撬开底盖就可以了，不用动grip.
|
K****D
发帖数: 30533 | 25 1) It doesn't increase grip size, since you never hold the top of
the handle.
2) For balance, of course it is different from putting lead into
the cap. You need to coordinate with adding lead tape to the frame
to get the correct balance. If you do not plan to add any lead to
the racket head, then this method won't work.
【在 w******n 的大作中提到】
: In addition to increase the grip size, this method also increase the swing
: weight
|
h*******s
发帖数: 8454 | 26 铅皮那么薄，估计根本感觉不出来
底盖其实在地下磕几下就碎了，然后就可以买个新的弄上，可能需要强力钉书机
【在 K****D 的大作中提到】
: I personally would not ply the cap but will stick lead stripes around
: the top of handle (under the grip of course). It won't look as nice
: but I don't care.
|
