K****D 发帖数: 30533 | 1 If I don't have lead tape? |
f*********0 发帖数: 886 | 2 用透明胶带贴quarter(s) 即可, 我干过。 |
K****D 发帖数: 30533 | 3 under the overgrip?
【在 f*********0 的大作中提到】 : 用透明胶带贴quarter(s) 即可, 我干过。
|
h****z 发帖数: 2009 | 4 进个paintjob吧,以你的热情,绝对应该
【在 K****D 的大作中提到】 : If I don't have lead tape?
|
K****D 发帖数: 30533 | 5 What paintjob? Don't understand ah?
【在 h****z 的大作中提到】 : 进个paintjob吧,以你的热情,绝对应该
|
h****z 发帖数: 2009 | 6 The ones top ATP pros use. Like your idol Murray, uses TGK238.2 (Prestige
Pro). Those are made in Austia and strictly for ATP players. |
K****D 发帖数: 30533 | 7 ft, I only need to make my current racket heavier.
It's just 9 oz and head heavy, :(
【在 h****z 的大作中提到】 : The ones top ATP pros use. Like your idol Murray, uses TGK238.2 (Prestige : Pro). Those are made in Austia and strictly for ATP players.
|
d****t 发帖数: 1284 | 8 first you need to take off the replacement grip and expose the bare handle
from here you can
1. put lead tap around the handle at the desired location, then put the
replacement grip back on.
2. remove the butt cap, put lead into the handle, use cotton ball or tapes
to secure the location of the weight in the handle, put the butt cap back on
. put the grip back on.
i usually do option 1. |
|
f*********0 发帖数: 886 | 9 no, 贴在拍柄屁股, 就是quarter圆贴圆拍柄截面。
【在 K****D 的大作中提到】 : under the overgrip?
|
K****D 发帖数: 30533 | 10 Even if I do 2, I still need to take off the original replacement
grip? //sigh, that's so much damage ah...
on
【在 d****t 的大作中提到】 : first you need to take off the replacement grip and expose the bare handle : from here you can : 1. put lead tap around the handle at the desired location, then put the : replacement grip back on. : 2. remove the butt cap, put lead into the handle, use cotton ball or tapes : to secure the location of the weight in the handle, put the butt cap back on : . put the grip back on. : i usually do option 1.
|
w********u 发帖数: 1865 | 11 如果用1的方法,会不会明显改变grip size?我也在考虑,但是不想开butt cap。
handle
tapes
back on
【在 d****t 的大作中提到】 : first you need to take off the replacement grip and expose the bare handle : from here you can : 1. put lead tap around the handle at the desired location, then put the : replacement grip back on. : 2. remove the butt cap, put lead into the handle, use cotton ball or tapes : to secure the location of the weight in the handle, put the butt cap back on : . put the grip back on. : i usually do option 1.
|
d****t 发帖数: 1284 | 12 it will make the handle a little bit bigger, but you will get used to it
very soon. you can try it. if you don't like it, you can still change it
back.
【在 w********u 的大作中提到】 : 如果用1的方法,会不会明显改变grip size?我也在考虑,但是不想开butt cap。 : : handle : tapes : back on
|
h********1 发帖数: 1546 | 13
on
option 2 is much easier.
just open your handle cap, and add some weight into the handle.
I added 2 nuts on my handle recently, and the racket feel much better.
【在 d****t 的大作中提到】 : first you need to take off the replacement grip and expose the bare handle : from here you can : 1. put lead tap around the handle at the desired location, then put the : replacement grip back on. : 2. remove the butt cap, put lead into the handle, use cotton ball or tapes : to secure the location of the weight in the handle, put the butt cap back on : . put the grip back on. : i usually do option 1.
|
t**********s 发帖数: 930 | 14 很多球拍拍柄底部的小盖是可以打开的。
我的Wilson Hyper Hammer 6.3打开那个小盖后塞入儿童自行车轮胎内胎胶皮。
包括overgrip原来重278克,现在是352克。
成了头轻的拍子了。
【在 K****D 的大作中提到】 : If I don't have lead tape?
|