M*******0 发帖数: 1502 | 1 刚装了个AR下半身,凑齐了六支长“枪”。拿出来晒晒,祝大家周末愉快! |
m****s 发帖数: 10867 | |
k**********i 发帖数: 8706 | 3 STG556呢
【在 M*******0 的大作中提到】 : 刚装了个AR下半身,凑齐了六支长“枪”。拿出来晒晒,祝大家周末愉快!
|
M*******n 发帖数: 1165 | |
A**1 发帖数: 1517 | 5 赞
【在 M*******0 的大作中提到】 : 刚装了个AR下半身,凑齐了六支长“枪”。拿出来晒晒,祝大家周末愉快!
|
f*********n 发帖数: 11154 | |
T*R 发帖数: 25894 | 7 上次6忽悠了大家一把。3也是气枪吧。其他好像都是真的。 |
t*****8 发帖数: 1274 | |
C*******d 发帖数: 15836 | |
f****a 发帖数: 4708 | 10 对啊,那么邪恶的barrel shroud。
【在 t*****8 的大作中提到】 : 右边数第三个是什么
|
|
|
n********r 发帖数: 25 | 11 我正想装一只AR-15, 请叫一下诸位有经验的:
在加州,选择以下的AR-15 upper 好不好?
http://www.bravocompanyusa.com/LMT-10-5-M4-Carbine-Upper-Receiv
AR-15 lower应该选什么?what about 90% lower? no need for the registration --
anyone in CA have experience?
多谢各位! |
M*******n 发帖数: 1165 | 12 upper看着还可以吧,你喜欢老式的handguard? 10.5的管子CQB。
90%的lower是啥,不用注册的话,总要买FFL转的那10%吧
【在 n********r 的大作中提到】 : 我正想装一只AR-15, 请叫一下诸位有经验的: : 在加州,选择以下的AR-15 upper 好不好? : http://www.bravocompanyusa.com/LMT-10-5-M4-Carbine-Upper-Receiv : AR-15 lower应该选什么?what about 90% lower? no need for the registration -- : anyone in CA have experience? : 多谢各位!
|
n********r 发帖数: 25 | 13 I'm new to AR 15, please tell me more about pro/con of different handguard.
My coworker told me that if you buy 90% lower (which means you need used
machinery to finish the rest 10% yourself only), and you don't need go
through registration and FFL for the lower receiver -- which is proved
through Calfornia court (according him, more can be found in calguns.com).
All said, you still need to comply to legal California AR 15:
- 10 round magzine
- off-list lower receiver
- no flash suppressor/compensator
- bullet button magzine removal
...
Please add if I missed anything.
I just want to check if anyone know about this, or already go through this.
Thanks in advance! |
M*******n 发帖数: 1165 | 14 我也CA想配AR15...不过不着急所以慢慢收集信息等好deal...
现在的军用警用ar都是用tactical rail handguard,因为是标准的可以很方便加上其
他很多配件比如flashlight,pistol grip,Thermal cam,grenade launcher啥的,不
过民用也就加加flashlight和pistol grip似乎,也有把scope放前面的
【在 n********r 的大作中提到】 : I'm new to AR 15, please tell me more about pro/con of different handguard. : My coworker told me that if you buy 90% lower (which means you need used : machinery to finish the rest 10% yourself only), and you don't need go : through registration and FFL for the lower receiver -- which is proved : through Calfornia court (according him, more can be found in calguns.com). : All said, you still need to comply to legal California AR 15: : - 10 round magzine : - off-list lower receiver : - no flash suppressor/compensator : - bullet button magzine removal
|
f****a 发帖数: 4708 | 15 10.5的只能用在SBR和pistol上。
CA的话,SBR就别想了。
你肯定要装一个pistol么?
没有90%lower一说,只有80%lower。
【在 n********r 的大作中提到】 : 我正想装一只AR-15, 请叫一下诸位有经验的: : 在加州,选择以下的AR-15 upper 好不好? : http://www.bravocompanyusa.com/LMT-10-5-M4-Carbine-Upper-Receiv : AR-15 lower应该选什么?what about 90% lower? no need for the registration -- : anyone in CA have experience? : 多谢各位!
|
o**d 发帖数: 3080 | |
M*******0 发帖数: 1502 | 17 多谢各位捧场,比起班上的大牛们实在是微不足道。
一并回复各位:
STG556从来没买过,在加州不知OK与否。
TMR说得对,左3和6是可以在家打的枪。
右3是MOSSBERG 930 + RIFLE BARREL。 |
n********r 发帖数: 25 | 18 多谢各位,真长知识了,加州也够斜门的,难怪搞这么烂。
Does 80% lower need to register or FFL? Anyone have experience?
Here is the law about SBR and length of any rifle in CA:
CA has its own definition of SBR in CA PC 12020(c)(2) , and includes
constructive possession phrasing.
12020(c)(2) As used in this section, a "short-barreled rifle" means any of
the following:
(A) A rifle having a barrel or barrels of less than 16 inches in length.
(B) A rifle with an overall length of less than 26 inches.
(C) Any weapon made from a rifle (whether by alteration, modification, or
otherwise) if that weapon, as
modified, has an overall length of less than 26 inches or a barrel or
barrels of less than 16 inches in length.
(D) Any device which may be readily restored to fire a fixed cartridge which
, when so restored, is a device
defined in subparagraphs (A) to (C), inclusive.
(E) Any part, or combination of parts, designed and intended to convert a
device into a device defined in
subparagraphs (A) to (C), inclusive, or any combination of parts from which
a device defined in subparagraphs
(A) to (C), inclusive, may be readily assembled if those parts are in the
possession or under the control of the
same person.
Paragraphj (E) above could be regarded as encompassing this, esp with a bad
antigun CA judge. |
s***s 发帖数: 421 | 19 真漂亮 赞!
【在 M*******0 的大作中提到】 : 刚装了个AR下半身,凑齐了六支长“枪”。拿出来晒晒,祝大家周末愉快!
|
T*R 发帖数: 25894 | 20 我刚搞了个80%lower,不过加州规矩严一些,不敢乱说。
【在 n********r 的大作中提到】 : 多谢各位,真长知识了,加州也够斜门的,难怪搞这么烂。 : Does 80% lower need to register or FFL? Anyone have experience? : Here is the law about SBR and length of any rifle in CA: : CA has its own definition of SBR in CA PC 12020(c)(2) , and includes : constructive possession phrasing. : 12020(c)(2) As used in this section, a "short-barreled rifle" means any of : the following: : (A) A rifle having a barrel or barrels of less than 16 inches in length. : (B) A rifle with an overall length of less than 26 inches. : (C) Any weapon made from a rifle (whether by alteration, modification, or
|
|
|
H****r 发帖数: 16240 | 21 你这整完以后
表面处理怎么做?
dura-coat喷塑?
【在 T*R 的大作中提到】 : 我刚搞了个80%lower,不过加州规矩严一些,不敢乱说。
|
T*R 发帖数: 25894 | 22 没弄,还那样。本来想duracoat,但是又想anodize
【在 H****r 的大作中提到】 : 你这整完以后 : 表面处理怎么做? : dura-coat喷塑?
|
H****r 发帖数: 16240 | 23 anodizezi自己没法做吧
【在 T*R 的大作中提到】 : 没弄,还那样。本来想duracoat,但是又想anodize
|
T*R 发帖数: 25894 | 24 可以做type 2, 不能做type 3
【在 H****r 的大作中提到】 : anodizezi自己没法做吧
|
H****r 发帖数: 16240 | 25 展开说说几种anodize的区别?
以前还真没关注过这个
【在 T*R 的大作中提到】 : 可以做type 2, 不能做type 3
|
T*R 发帖数: 25894 | 26 我也就听说过这两种。插上电就是type 2,过程中工件的温度会上升,所以只能生成一
定厚度和强度的镀层。type 3插电的同时要降温。专业的阳极处理很多都是type 3.
【在 H****r 的大作中提到】 : 展开说说几种anodize的区别? : 以前还真没关注过这个
|
q**u 发帖数: 12289 | 27 送出去做吧,不贵
【在 T*R 的大作中提到】 : 我也就听说过这两种。插上电就是type 2,过程中工件的温度会上升,所以只能生成一 : 定厚度和强度的镀层。type 3插电的同时要降温。专业的阳极处理很多都是type 3.
|
s******u 发帖数: 538 | |
T*R 发帖数: 25894 | 29 不是贵不贵的问题,喜欢做手工。
【在 q**u 的大作中提到】 : 送出去做吧,不贵
|
H****r 发帖数: 16240 | 30 坚决支持你做~~~
然后写个图文并茂的review贴过来
【在 T*R 的大作中提到】 : 不是贵不贵的问题,喜欢做手工。
|
|
|
X***y 发帖数: 3947 | 31 刚想找人问问自己涂色的问题,没想到您这手儿也练过?
那请教往金属frame上印迷彩之类的什么办法?water print transfer 抗造吗?
【在 T*R 的大作中提到】 : 不是贵不贵的问题,喜欢做手工。
|
T*R 发帖数: 25894 | 32 蛋,我其实啥都不懂啊,也在摸索。要迷彩duracoat吧,现在他们有个aerosol罐子的
套餐,貌似很简单,连空压机,喷枪都不用了。
【在 X***y 的大作中提到】 : 刚想找人问问自己涂色的问题,没想到您这手儿也练过? : 那请教往金属frame上印迷彩之类的什么办法?water print transfer 抗造吗?
|
t******y 发帖数: 5040 | 33
赞!
【在 T*R 的大作中提到】 : 不是贵不贵的问题,喜欢做手工。
|
X***y 发帖数: 3947 | 34 赞!
【在 T*R 的大作中提到】 : 蛋,我其实啥都不懂啊,也在摸索。要迷彩duracoat吧,现在他们有个aerosol罐子的 : 套餐,貌似很简单,连空压机,喷枪都不用了。
|
l**s 发帖数: 20567 | |
s9 发帖数: 1192 | 36 我勒了个去,warlord啊!
【在 M*******0 的大作中提到】 : 刚装了个AR下半身,凑齐了六支长“枪”。拿出来晒晒,祝大家周末愉快!
|
w***t 发帖数: 8175 | 37 壮观。可以组织一个加强班了
【在 M*******0 的大作中提到】 : 刚装了个AR下半身,凑齐了六支长“枪”。拿出来晒晒,祝大家周末愉快!
|
T*R 发帖数: 25894 | |
f*********n 发帖数: 11154 | 39 600公斤那个昨晚上十大了
【在 T*R 的大作中提到】 : 这铁是不是上首页了?
|
T*R 发帖数: 25894 | 40 班上还不发轮包子?
【在 f*********n 的大作中提到】 : 600公斤那个昨晚上十大了
|
|
|
M*******0 发帖数: 1502 | 41 请你来选项目,我奉陪,大家做裁判。
HAVE FUN......
【在 s******u 的大作中提到】 : LZ每把的装备都很齐全 装备党?
|
x*7 发帖数: 11281 | 42 版主发个包子吧,好歹当了次鲶鱼
【在 f*********n 的大作中提到】 : 600公斤那个昨晚上十大了
|
T*R 发帖数: 25894 | 43 就这么几把枪,还真算不上什么装备党。
【在 s******u 的大作中提到】 : LZ每把的装备都很齐全 装备党?
|