o*b 发帖数: 70 | 1 是关于digital signal processing的问题,我专业是PE,对于我有点困难:
现在有一路模拟 750V 直流电压信号(包含360hz 和 720hz的电压谐波)被ADC转换,
由于硬件原因,这个ADC转换的采样必须是variable time step oversampling,也就是
说得到的Digital信号的time step是变化的。现在我需要在这样的digital信号后面加
一个bandpass filter。长话短说: 需要设计一个bandpass filter来处理这个time
step变化的digital信号。
请问你有没有接触过类似的带宽滤波器?能不能推荐一些相关文献?
谢谢。 |
p******a 发帖数: 130 | 2 可以参考下multirate signal processing 之类的书。
【在 o*b 的大作中提到】 : 是关于digital signal processing的问题,我专业是PE,对于我有点困难: : 现在有一路模拟 750V 直流电压信号(包含360hz 和 720hz的电压谐波)被ADC转换, : 由于硬件原因,这个ADC转换的采样必须是variable time step oversampling,也就是 : 说得到的Digital信号的time step是变化的。现在我需要在这样的digital信号后面加 : 一个bandpass filter。长话短说: 需要设计一个bandpass filter来处理这个time : step变化的digital信号。 : 请问你有没有接触过类似的带宽滤波器?能不能推荐一些相关文献? : 谢谢。
|
a****l 发帖数: 8211 | 3 750V,我好怕啊...
【在 o*b 的大作中提到】 : 是关于digital signal processing的问题,我专业是PE,对于我有点困难: : 现在有一路模拟 750V 直流电压信号(包含360hz 和 720hz的电压谐波)被ADC转换, : 由于硬件原因,这个ADC转换的采样必须是variable time step oversampling,也就是 : 说得到的Digital信号的time step是变化的。现在我需要在这样的digital信号后面加 : 一个bandpass filter。长话短说: 需要设计一个bandpass filter来处理这个time : step变化的digital信号。 : 请问你有没有接触过类似的带宽滤波器?能不能推荐一些相关文献? : 谢谢。
|
s*****t 发帖数: 987 | 4
haha.
【在 a****l 的大作中提到】 : 750V,我好怕啊...
|
s*****t 发帖数: 987 | 5
multirate can only deal with some fixed/periodic varying sampling.
LZ, describe more about the timing varying characteristics.
【在 p******a 的大作中提到】 : 可以参考下multirate signal processing 之类的书。
|
c*********l 发帖数: 1065 | 6 variable step transient? use S/H circuit for resampling |
c****o 发帖数: 49 | 7 try search time interleaved adc, timming jitter error |
o*b 发帖数: 70 | 8 Actually this is the DC bus voltage for a six switches voltage source
inverter which drives a motor
The objective of designing the digital bandpass filter is to get the 360 Hz
and 720 Hz component voltages, respectively. Once the magnitude of the 360/
720 Hz component exceeds a certain voltage value, the processor will act to
achieve some protective functions.
I didn't pay much attention to the time varying characteristics, I just
assumed that the output of the ADC is a fast change digital (because of the
oversampling of a 720Hz signal) signal with variable time step.
Right now, the key of this issue is to get the magnitude of the 360/720 Hz
voltage component. After the bandpass filter, it will be able to calculate
the means of the 360/720 Hz.
But, how to design a filter with variable time step?
【在 s*****t 的大作中提到】 : : multirate can only deal with some fixed/periodic varying sampling. : LZ, describe more about the timing varying characteristics.
|
p***e 发帖数: 472 | 9 Well, I'm just thinking out loud. You want to extract the 6th & 12th
harmonics from a DC measurement. Can you leverage something from the
coordinate transformation? For example, convert the 6th and 12th components
to DC respectively, and then use a LPF to extract the signal. Though I don't
know why you want to use variable rate sampling, this way, you might be
able to avoid it. |
l***g 发帖数: 1035 | 10 eee...你这个直接dfft不就得了?
Hz
to
the
【在 o*b 的大作中提到】 : Actually this is the DC bus voltage for a six switches voltage source : inverter which drives a motor : The objective of designing the digital bandpass filter is to get the 360 Hz : and 720 Hz component voltages, respectively. Once the magnitude of the 360/ : 720 Hz component exceeds a certain voltage value, the processor will act to : achieve some protective functions. : I didn't pay much attention to the time varying characteristics, I just : assumed that the output of the ADC is a fast change digital (because of the : oversampling of a 720Hz signal) signal with variable time step. : Right now, the key of this issue is to get the magnitude of the 360/720 Hz
|
g*z 发帖数: 124 | 11 use AC coupling, get rid of the 750V DC, only focus on the 360 720Hz part,
use some comparators to detect the peak, no ADC needed |
g******u 发帖数: 3060 | 12 你如果只需要保护,根本不需要ADC,还有variable rate sampling感觉毫无意义 |
L********r 发帖数: 758 | 13 What roughly is the ADC's oversampling rate?
Do you have the time stamp information for each sampling point?
【在 o*b 的大作中提到】 : 是关于digital signal processing的问题,我专业是PE,对于我有点困难: : 现在有一路模拟 750V 直流电压信号(包含360hz 和 720hz的电压谐波)被ADC转换, : 由于硬件原因,这个ADC转换的采样必须是variable time step oversampling,也就是 : 说得到的Digital信号的time step是变化的。现在我需要在这样的digital信号后面加 : 一个bandpass filter。长话短说: 需要设计一个bandpass filter来处理这个time : step变化的digital信号。 : 请问你有没有接触过类似的带宽滤波器?能不能推荐一些相关文献? : 谢谢。
|