y***n
发帖数: 6764 | 1 我觉得上胶水前要保证粘合的两个面都很平整，这个应该很重要，当然因为买来的是木
板，本身就很平整所以就没问题了。
接下来在一个面上上胶水，我是用手指帮助胶水流展开，这木胶小时候一直玩的所以没
抗拒心，然后马上把另一面合上去，接着就是上bar clamp了，这玩意儿我们小时候都
没条件用的所以就是靠手的很累效果当然不好。
这bar clamp我也是第一次用，太好用了。放一天，第二天就天衣无缝了。这么说吧，
板子粘好以后，我不是用circular saw把侧面再trim一下么，这trim下来的小木条我用
手用力掰，结果断开来的都是木板自己，粘合面纹丝不动。 |
|
y***n
发帖数: 6764 | 2 其实用C clamp就好了，我的确是刚起家，啥都没有。买bar clamp是为了胶合台面没办
法。 |
|
s********g
发帖数: 56 | 3 入了一堆老pipe clamps,9个4尺3/4 pipe clamps合计$80。应该算不错的deal了。 |
|
p**********g
发帖数: 9558 | 4 Just a reference, don't believe in that
http://www.rockler.com/articles/pocket-hole-joinery-with-the-kr
What About Strength?
The steel self-tapping screws the Kreg system uses are much stronger than
the wood fasteners they replace – dowels, tenons, biscuits, etc. Along with
that, the self tapping screws exert a tremendous amount of clamping
pressure, drawing the surfaces of the wood into the “intimate contact”
that adhesive manufacturers say is among the most important factors in
producing a sol... 阅读全帖 |
|
L**P
发帖数: 3792 | 5 比level高级点方便点
同样的东西别的地方都要双倍以上价格
This easy-to-use 50” clamp and saw guide is great for general purpose use
in a variety of woodworking applications. The clamp includes soft grip
swivel pads to secure materials and accurately cut angles up to 45 degrees.
Constructed of durable yet lightweight aluminum. |
|
p********r
发帖数: 687 | 6 never did that personally, but I guess a diamond blade will work
you will have to clamp it when cutting and it will be dusty
or I guess you can clamp the grinder somewhere and hold the tile with
yourhands |
|
G*****e
发帖数: 2577 | 7 你说的“大夹子”可能不够给力，我上夹木头的夹子。google“wood clamps”。HFT的
便宜货可以整两三个，用完了退。
协助切直线的不一定非要废瓷砖，好瓷砖也行，直边的薄木板也可。用wood clamp把两
块瓷砖夹紧即
可。
grinder单手不能操作问题不大，把瓷砖固定到bench，双手操作可解。
grinder free hand不能做非常精细的切割，至少我的理解是这样。
grinder为安全起见，启动后空转一分钟再做业，双手持。
我没有用diamond blade，就一般的masonry轮片。
另外听皮皮胖的没错。。。。。。 |
|
t*******d
发帖数: 1530 | 8 liquid nail. 粘起来容易，但你得想办法固定几个小时。我是用一个clamp夹住
coutertop的边缘，然后一个木条一头抵着clamp，一头抵着挡板。 |
|
s*****6
发帖数: 499 | 9 第一次买房，不懂啊。列出主要问题，大家帮忙看看吧
ROOF SYSTEM
Action Needed- Flashing is improperly installed at left side of chimney.
Step flashing is not under siding as required. Have aqualified roofing
contractor repair.
GARAGE / CARPORT
GARAGE DOOR HARDWARE:
Action Needed- Installing of a safety cable through the safety springs is
recommended. Safety cables are recommended to be installed through (in the
center of) the safety springs to prevent the spring from "flying" in the
event of breakage.
DOOR OPENERS(S):
Act... 阅读全帖 |
|
T**9
发帖数: 1528 | 10 看起来不难,可能就是门要点时间，不过门可以改成shaker door 简单些。
是漆还是 stain? 漆的话，简单些，大胆使用螺钉.
关键之关键就是要把板 cut 的方正。
1.锯子：
track saw,
or table saw (like Bosch 4100-09)+ circular saw
or regular circular saw with straight edge
2. Router with some router bits depending on the profiles needed
3. 电钻
4. Nail gun, (may consider DEWALT DC608K, this one uses battery power)
5. orbital sander
6. Mini Kreg Jig kit, one Kreg face clamp, two Kregright angle clamp
和其它需要的。
这么大的柜子，做完工具就回本了。 |
|
l********g
发帖数: 677 | 11 那种巨大的 clamp 你们都在哪儿买得？ 一个 clamp 就得60多刀，太贵了 |
|
X*U
发帖数: 5518 | 12 这个是cinch，不是clamp
虽然两种都行，我还是更喜欢clamp一点。
而且，这种玩意，一个做不好，后患无穷，还是买个放心的好
[发表自未名空间手机版 - m.mitbbs.com] |
|
d**********0
发帖数: 13081 | 13 有一种 Clamp。 是一对， 用在stud 上， 要多长有多长。。‘
好像比买这种crazy long clamp 好？ |
|
p**********g
发帖数: 9558 | 14 我用的是3/4的，不过买的二手的，没得挑，也还不错
可否考虑parallel clamp，这样的夹子平板比较好，不过pipe clamp也可以做到就是了 |
|
t********t
发帖数: 5415 | 15 这种长的clamp job有可能的话上下加个木条拿个小clamp夹一下会好很多吧？（垫个蜡
纸/胶带防止胶水把木条也粘上） |
|
|
s********r
发帖数: 318 | 17 在什么地方用那个clamp呀？
我只需要一个elbow和wall cap，都用silver tape密封就可以了吧？
看到有人提过用这个8"的clamp，在youtube做研究的时候看到都是用silver tape封了
一下。
谢谢 |
|
P**5
发帖数: 3422 | 18 靠墙那圈黑色的是 hose clamp 吗？ 看上去根本没装到两个管子接头的地方。 这谁干
的活？
或者 换个那种能上紧螺丝的 hose clamp |
|
a*f
发帖数: 1790 | 19 B&D或Keter便携的必须用Clamp-On Vise吗？三英寸的Clamp-On Vise能夹住除草机的刀
片吗？ |
|
i***e
发帖数: 9429 | 20 我以前有个B&D的， 和目前amazon 上卖7，8十刀的类似，TOP 是两片MDF的， 本身就
是一个夹具。
如果你要平着夹的话， 可以再买两个bench clamps 做固定用，bench clamps 以后都
会经常用得着。
keter 我没用过。 |
|
m*******p
发帖数: 1978 | 21 To make a decent bed, you'll need:
Table saw (~$400) or track saw ($700-800)
Router ($200), and preferably router table ($200-$500)
Random orbit sander ($50)
A work bench or saw horses+top ($100-$300)
Good clamps $40x8 = $320
Power drill $100-200
Miter saw $100-$400
Painting equipment, paint, etc. ($100)
Nail gun + compressor ($200)
If not using plywood, you'll need a wood plane ($300-$600), and possible
more clamps.
And at least 10 small projects to have enough skill to make the bed look
decent... 阅读全帖 |
|
F********n
发帖数: 244 | 22 LD和我在做关于存脐带血的调查，结果查到一个更重要的话题：timing of umbilical
cord clamping at birth. One paper published on "Journal of American Medical
Association" (2007, vol.297, pp1241-1252) concludes that if the umbilical
cord is clamped two to three minutes (with minimum two minutes) after the
baby is born, the blood in placenta circulation will flow to the baby by the
amount of 20-30ml/kg. In other words, if the baby weights 3kg, he/she will
get 60-90ml more umbilical cord blood, which results in "significantly lowe |
|
H**********l
发帖数: 44 | 23 Just an idea, did you consider donating cord blood. It's given to the
person who has the best match. Hmm... Who would be the best match?
That's if you're sure to bank the cord blood. Keep in mind, the more cord
blood you bank, the less for the baby.
But if you're having the baby at a hospital, it's likely that the cord will
be clamped and cut quickly. Then probably doesn't matter either way.
Unless you're able to delay cord clamping & cutting. |
|
J***b
发帖数: 76 | 24 A Postdoctoral Research Associate position is available immediately to study
synaptic transmission/plasticity and alcohol abuse at the Texas A&M Health
Science Center.
Research in the lab uses state-of-the-art technologies, including patch-
clamp recording from genetically identified neurons using transgenic animals
, optogenetics and pharmacogenetics, analysis of structural plasticity using
3-D reconstruction of single neurons in combination with behavioral
procedures. For more details, please ... 阅读全帖 |
|
m*******6
发帖数: 314 | 25 Position Title: Postdoctoral Research Trainee
Company Name: University of Tennessee Health Science Center
Job Function: Postdoc
Entry Level: No
Location(s): Memphis, Tennessee, 38163, United States
Posted: June 23, 2014
Job Type: Full-Time
Min Education: Ph.D.
Min Experience: 1-2 Years
Required Travel: None
Contact Person: Adebowale Adebiyi
Email Address: a******[email protected]
Job Description
A postdoctoral position for a trained patch-clamp electrophysiologist... 阅读全帖 |
|
m*******6
发帖数: 314 | 26 Post Doctoral Scholar - Weber/Moskowitz Lab
The University of Chicago - Chicago, IL
The University of Chicago’s Department of Pathology has an opportunity for
a
Post Doctoral Scholar (PDS) to work in the labs of Dr. Christopher Weber and
Dr. Ivan Moskowitz. The Post Doctoral Scholar will engage in scientific
research involving the study of cardiac physiology and disease which will
lead to a better understanding of the cellular mechanisms of arrhythmias.
He/she will conduct experiments in cardiac... 阅读全帖 |
|
m*******6
发帖数: 314 | 27 Post Doctoral Scholar - Weber/Moskowitz Lab
The University of Chicago - Chicago, IL
The University of Chicago’s Department of Pathology has an opportunity for
a Post Doctoral Scholar (PDS) to work in the labs of Dr. Christopher Weber
and Dr. Ivan Moskowitz. The Post Doctoral Scholar will engage in scientific
research involving the study of cardiac physiology and disease which will
lead to a better understanding of the cellular mechanisms of arrhythmias.
He/she will conduct experiments in cardiac... 阅读全帖 |
|
|
x**8
发帖数: 4844 | 29 看清楚油从哪儿漏的了吗?
Filter漏换Filter, Fuel hose漏换hose. Clamp不紧换clamp.除非从engine里面漏,否
则应该很好修的.到店里买来part装上就好. |
|
Y****r
发帖数: 3473 | 30 the window openner has a belt and several plastic clamps which connects the
glass to the belt
at least one plastic clamp is broken, now the belt moves but the glass dosn'
t |
|
t*********1
发帖数: 502 | 31 自己刚换过一套前闸.
part: $50 (front brakes) + $4 (pad cleaner)
工具： $93
C clamp: $10
lug wrench: $10
jack stands: $15
torque wrench: $38
manual: $20
工具是大头，不过很多是重复用的。其他工具因为自己早有，这次只是新加了$20 的C-clamp + lug wrench.
自己第一次自己换，弄坏了nug bolts 多次，好在COSTO全免费cover了。
问了几个修车铺：dealer 要 ~$280， sears 要 ~$180，一个修车铺要 ~160。号称要两个小时labor. 实际上自己做只花了30 分钟，还是第一次。 |
|
b*****t
发帖数: 3928 | 32 I cann't figure it out how one fix clamp work. There are some discussion on
badmintoncentral. To me, only one fix clamp may be more headache than help. |
|
|
d**********i
发帖数: 365 | 34 there is no need to use a starting clamp. I will show you how. You will need
a spreader if you really cares about your paint in the racket, otherwise it
will be fine.
Someone in the forum once mentioned that you should call the customer
service of EGNAS to see the availability before ordering their product. Also
, let them know that you need the badminton flying clamps, not the tennis
ones.. |
|
w******x
发帖数: 4396 | 35 source of clicks are hard to pinpoint. what you THINK is coming from BB
might end up a saddle creak or, in rare cases, cracked frame. start by
tightening everything up. BB cups, saddle clamp, seatpost clamp, pedals,
crank arms.
not knowing what cranks you have i can't tell you what tools you will need
for the crank and BB. |
|
O****e
发帖数: 3290 | 36 有这么玄乎？那你准备买amazon的park了？又看了一下我的park，好像主要区别都在那
个clamp上，park的是metal的，而且park的是靠一个螺丝外加一个弹簧调节clamp的松
劲，nashbar 的好像只靠一个螺丝调节。 |
|
J********e
发帖数: 2284 | 37 给大家贴出来作为参考，每行的最后一个数字是价钱。另外咆哮一下：太TM烧钱了！ :D
Name Specification Comment Price
Frame: Pedal Force QS3 Carbon Road BB30, seat tube 50cm, green/white
Headset: Asymmetric Integrated
Fork: CRK11 carbon for asymmetric 42-52 mm head tube 724
Seat Post: P2 181g 300mm x 31.6mm 59
Shipping 25
Fizik Arione Wing Flex MANGANESE Road Bike Saddle Used 40
Nashbar Deluxe 31.8mm Alloy Stem Used 110mm, 31.8mm clamp 0
Bontage... 阅读全帖 |
|
i*********5
发帖数: 19210 | 38 handlebar是铝的，太旧了，１２年左右了，是从以前的Cannondale上挽救出来的。
见Tri版的贴子：
http://www.mitbbs.com/article_t/Tri/31169089.html
我认为事故的root cause是stem clamp上的太紧，或者是clamp不好，把handlebar的那
个地方给压变形了。再受力后就渐渐开裂，直到那天稍微一点力就把它snap断了。
大家如果是骑旧车，一定要定期检查，特别是龙头什么的，一旦出现问题都太危险了。
我这次算是运气好逃过一难。 |
|
l******n
发帖数: 256 | 39 经一段时间测试，发现自行车黄油用来润滑汽车刹车clamp毫无压力！哈哈
黄油是涂在clamp跟底座连接的那个可以滑动的杆上的。现在噪音也没了，刹车感觉那
叫一个润啊 |
|
|
s****y
发帖数: 939 | 41 工具如图：一个2inch的clamp，一个1.5cm见方的铝片中间钻直径1cm洞，一个一分硬币。
调的时候让clamp活动的一边和front sight底座之间垫上硬币去挤压底座，铝块放到另
外一边。front sight底座被挤压时，铝块上的小洞可以提供移动空间。
另外，铝块要锉出根准星护套形状吻合的一个斜面。 |
|
S**********s
发帖数: 4534 | 42 比SCAR 17S重两磅， 还贵1000多。 慢走不送。
P.S: 附上一篇老段子
http://larrycorreia.wordpress.com/2007/10/09/hk-because-you-suc
"An open letter to the gun community from HK’s marketing department: In a
world of compromises, some people put the bullets in the magazine backwards
…But it doesn’t matter, because our gun is on the cover of the Rainbow Six
video games. Look how cool that SEAL coming out of the water looks… If you
buy a $2,000 SOCOM, you will be that cool of an operator too. And chicks
will dig you.
At HK, ... 阅读全帖 |
|
k**********i
发帖数: 8706 | 43 不记得了，好像是amazon上啥杂牌子的
这个sight tool基本上就是个带孔的c-clamp，sight（base？）的圆柱应该能通过这个
孔，被夹了之后可以左右移动。但这个c-clamp的尺寸有问题,会顶住sight hood。
症状和这个一致，时间00:19
http://www.youtube.com/watch?v=lrJ2KQsSBS0
这个大叔自己磨掉了一块 |
|
a***a
发帖数: 8941 | 44 post my test results for SBE2 long time ago:
枪的构型(两种):
1）标准型：没有弹夹延长管，也没有plug，没有背带。
2）延长型：有弹夹延长管（Tac Star），没有plug，有barrel clamp，有背带。
说明一下，之所以选择两种构型，是因为Benelli的惯性后坐的自动方式，据说对于枪
的重量比较敏感。当枪的重量比较重的时候，后坐力会减弱，因此半自动的可靠性可能
下降。经过秤量，全枪处在标准构型下，重量为7磅5盎司，加了延长管之后（不包括
barrel clamp和背带）重量为7磅11盎司。也就是说延长管重6盎司。当然，加了延长管
之后，因为容弹量增大，也会导致全枪重量进一步增大。
弹夹容量，在无延长管，也无plug的情况下，可以容纳2发（居然只有2发，第3发可以
塞进去一大半，但是差一点点）3寸半的弹，3发3寸的弹，不知道能不能装下4发2-3/4
寸的弹（忘记了，呵呵）。加了plug的情况下，刚刚好可以塞进去2发3寸半的弹。
加了延长管之后，弹夹可以容纳5发3寸半的弹，6发3寸弹，或者7发2-3/4寸的弹。如果
加上枪膛里面... 阅读全帖 |
|
h*******g
发帖数: 2201 | 45 好贴，收了。
什么时候讲讲front sight和butt stocks吧？ 我想装一个free float 20"的rifle,还
在看free float handguard和front sight如何配在一起不会handguard过长遮住gas
block on 20" barrel。
大家说不要用Pinned的front sight,用screwed 或是clamped.也有人说，对于barrel的
影响pinned
以后装scope,又不会太重，影响barrel的准确性？
想买一个collaposible或是adjustable的butt stocks.不知道两个有何区别？都是可调
节长短的。经常看到说six/eight position adjustable,不知道这是什么意思？ 大大
麻烦解释一下？ 再推荐一个butt stocks,适合我们小个子（173-175)的。 |
|
x*7
发帖数: 11281 | 46 我的也是上在一块木板上，然后用俩C-CLAMP夹住
需要移动时候很方便。
只是我没有那么大个的C-CLAMP，用的是HD买的塑料货 |
|
f****t
发帖数: 15913 | 47 用两个CLAMP更稳，我用一个感觉整形时切菜板动得大了点，毕竟整形时用力最大，我
还是再搞一个CLAMP。 |
|
|
k*******n
发帖数: 5546 | 49 小小抱怨一下，都怪我自己忽视了小零件，整枪都凑齐了就差一个gas block, 我找了
个某论坛的二手DD clamp on gas block, 新的只要$55, 他那个旧的要50＋3运费。我
发个PM很客气问打了多少发，能不能$50shipped, 过了半天那家伙回信，大意就是：不
知道打了多少发，price firm，你丫爱买买，不买滚～～～
一怒之下，brownell backorder了一个新的Vltor Clamp On, $68, 多花15块买个比DD
好的全新的，俺还买了一个Samson EVO rail备用, 用coupon "DUT", 再用Befrugal.
com 5％ cash back, 加上信用卡cash back, 不贵几个钱。反正回国2月才回来，等呗。
xs7,你收到我给你发的邮件了吧？ |
|
r***6
发帖数: 401 | 50 I was researching quite awhile for a good camera mount, I think I got it and
am sharing it here.
UltraClamp Assembly http://amzn.com/B000ABB4HC
It had a clamp that you can either clamp to your tree stand or rail or rifle
foreend. It has then a short arm and ball link you can swivel and turn to
face diff direction.
Gopro or contour hd wont work well because they have fixed lense that is too
wide for hunting purpose. For deer hunting, we would need field of view of
about 50-60 degrees. So a canon ... 阅读全帖 |
|
