h****z
发帖数: 2009 | 1 Why use SA to string poly? They don't sell poly even. I always use a
professional tennis store to do string, since poly lasts a long time. |
|
K****D
发帖数: 30533 | 2 Because SA is 0.5 mile away, while the nearest pro shop is around
8 miles away.
Also, SA is just $13 with tax if I provide the string.
So far I am still satisfied with their stringing. I am not a string
guy so maybe I am numb to the differences in tension. the majority
strings I hit with are 10+ years old so any fresh string feels great
to me, hehe. |
|
h****z
发帖数: 2009 | 3 haha, then I am lucky. Within 1 mile from my home, 1 SA, 1 tennis shop, 1
tennis school... |
|
t***3
发帖数: 142 | 4 羡慕强壮的手臂，我用K90 55lb手臂都隐隐的痛
拍拍出界是挥拍的问题（too flat?)，你估计是eastern grip,用semi-western 试试
. |
|
d****t
发帖数: 1284 | 5 say you want to string at tension 50lbs. a 10% pre-stretch will be you
first pull the tension to 55lbs then reduce it to 50lbs. you can only do
this is with a machine with this feature built-in.
if |
|
p***e
发帖数: 29053 | 6 I did, almost everyday.
normally, swimming at noon, tennis and badminton at night or weekend
morning.
lost 55lbs, but gain 10lbs back recently |
|
w******n
发帖数: 13172 | 7 这么小拍面还走线，线大概是不行了。要么就是你上的时候就没有55lb。还有，如果怕
走线，用多边形的poly，永远不走线 |
|
T*********s
发帖数: 98 | 8 不同的String 走线差别很大。建议你试试LUXILON ALU POWER BIG BANGER. 我曾用过
KFACTOR 90 with LUXILON, 45lb， 基本没有走线。我现在用100 SQ. IN. 的拍子，拉
LUXILON 50lb，也是基本不走线。以前曾用过Prince string（Prince Synthetic Gut
Multifilament String 16）, 拉55lb还是走线走的一塌糊涂。很多人怕LUXILON 伤手
，但如果你降低大概10%的磅数，问题应该不大。当然还是要适应你自己。
on
90. |
|
K**o
发帖数: 906 | 9 自己用这个玩意上线很久了；最近发现自己无论怎么弄，跟tw给上好的同样磅数（
55lbs）差别很大
main string问题不大，因为在cross弄完后会自动拉紧
问题在于cross，特意设置到56lb做实验，上完后还是发现比tw搞的（要求55 lbs）松
；因为cross上完后用手能掰动，tw上的同样力量就不行。。奇怪 |
|
c***s
发帖数: 1139 | 10 关于磅数，要看你绑什么线，要是sync/multi/gut 就稍微高一点，要是用纯poly 就要
低很多．
我个人喜欢用低磅数，高磅数的，感觉是一快硬板，一下就崩走了．
底磅数才赶紧能吃进这个球，打出spin/slice
不是poly 的线，50-55lb 就可以了，poly 的线可以降到45-50lb. |
|
z*********n
发帖数: 94654 | 11 为啥你给的磅数这么高
有人推荐我用55lb
为什么你推荐syn gut
很多人推荐poly
彻底不懂中，呵呵 |
|
e***y
发帖数: 1443 | 12 刚才在craigslist看到这拍，中古的，这个算什么行情：
"RARE" - Dunlop - Max 200G - John McEnroe - Graphite Injection - Max Series
- Vibration Control - for optimum performance John McEnroe recommends a
string tension of 55lb - made in England - L4 L1½ Grip - Used - Very
Good Condition! - comes with cover - $200.00
好东西么？
还有几个：
Pro Kennex - Graphite Ace - mide size - Graphite/Wood - Graphite inlaid - L3
4 1/8 Grip - The frame combines selected american ash & maple with a
Graphite inlaid to provide the advantages o... 阅读全帖 |
|
d****t
发帖数: 1284 | 13 tension really is just for reference only, if it feels good if you string at
72lbs on that particular machine, then just keep doing it.
my machine is very loose too, i have to string mine at 69lbs, which probably
equal to 55lbs or lower from a pro shop machine. |
|
M***x
发帖数: 288 | 14 你的明显没有72lbs...你上次还说我的线太紧, 其实我只穿了55lbs |
|
M***x
发帖数: 288 | 15 Have u heard about an app on iphone(ipad) called RacquetTune? It is really
accurate.
I strung my racket at 55lbs, the app shows the tension is 54.8lbs. |
|
M***x
发帖数: 288 | 16 It can only measure the fullbed tension.
You cannot separate the main and cross.
Like last time I strung my main/cross at 56/52, the app shows 55lbs. |
|
a***8
发帖数: 2433 | 17 Right, feels tighter than wellmoon's 55lbs, lol... |
|
a*******e
发帖数: 12169 | 18 已经是low power的拍子了，HEAD Radical MP， 57lb
今天FF的拍子送到，55lb，试试如何。反正用别人的玩玩觉得控制很好。 |
|
f*****n
发帖数: 18176 | 19 comments from TW.
Comments: I think people are looking at this the wrong way (i.e., good or
bad). It was the premier racquet of its time, and still holds up relatively
well to the competition. But to compare it in terms of better or worse makes
no sense. It's like comparing a Ferrari from the 60s to the sports cars of
today. In terms of performance, the Ferrari cannot compete. Still, I would
love to have that Ferrari. And like this sports car analogy, you could use
these sticks to make your tenn... 阅读全帖 |
|
a**p
发帖数: 258 | 20 hybrid, 试过和nxt, 感觉还不错， 50－55lb。不过nxt和它配断得快些。 |
|
b*e
发帖数: 3845 | 21 你原先的理解是对的。我估计55lb你刚开始打还可以，线退磅后control就会变差 |
|
b*******s
发帖数: 1175 | 22 不会把？是不是转体不够用手腕太多？我一直用luxilon alu power, 55lbs, 感觉很好
啊。。。。。 |
|
d*g
发帖数: 16592 | 23 PS好像是B家比较没有力量，control oriented系列。
我觉得55lb有些高，我98拍面穿52lb的17g的，我觉得还好。 |
|
|
b*e
发帖数: 3845 | 25 It's a low powered racquet.
Poly I suggest 50lbs.
Synthetic probably 53-55lbs. |
|
b*e
发帖数: 3845 | 26 Some strings I recommend.
$: prince synthetic gut duraflex 17 (55 lbs) or gosen micro sheep 17 (54 lbs
as tension stability is better)
$$: Weiss Cannon Scorpion 17 Main (50 lbs), gosen Micro sheep 17 cross (
50lbs)
$$: Full string job of Technifibre NRG2 (55lbs) - if you like multifliament |
|
c*****s
发帖数: 2146 | 27 刚让人绷45lbs,觉得挺紧的，怀疑是不是绷成55lbs了。有人用过45lbs吗？ |
|
z*********n
发帖数: 94654 | 28 前几天总觉得有点紧，这几天降镑降到感觉最舒服的位置了。准备从今天起不用这个拍
子了，留着对付老肯的时候来享受这个最舒服的感觉
全poly，上了55LB，打了两周，我估计降到51 52的样子？
我以前直接上52的时候就觉得很舒服
据说全poly前两周降镑厉害以后就不降了？如果是这样，跟老肯打完这个拍子我就准备
打到断，哈哈 |
|
t*********d
发帖数: 3398 | 29 球拍是好月的吐血拍， 线是八宝的pro hurricane，55lbs
换线后第一用， 不是很习惯， 以前基本用60lbs的线 |
|
d*g
发帖数: 16592 | 30 前段时间在tennis depot还是tennis plaza买了一个reel的luxilon m2 pro，discount
才80多块。还不错，不走线。拿他绑了我的volkl catapult 10, full bed 55lb，拍子
软，甜点大，线syngut，综合效果是拍子感觉非常软，手臂不太舒服时候打，感觉不会
加重伤。 |
|
d****t
发帖数: 1284 | 31 网上没有说明书下载？ crank的机制应该都是一样的，eagnas没有，看看gamma的应该
也可以。
实在不行就加两磅就得了。实际磅数就是个reference，你觉得那个setting舒服就用就
好了。我的穿线机就很松，60lb跟pro shop里55lb差不多。 |
|
z*********n
发帖数: 94654 | 32 full bed 16 rpm blast strung at 55lb. coach s setup .
btw its forearm soring |
|
f*****n
发帖数: 18176 | 33 我。ps85 单反，55lb all poly |
|
n*********e
发帖数: 25274 | 34 看来天气暖和和球比较新确实有助于发高速球...
此拍string力量55lb. |
|
M***x
发帖数: 288 | 35 Racket endorsed by Dolgopolov, Dimitrov & Blacklodoss.
Strung with Solinco Tourbite 16@55lbs.
Also willing to trade with Blade 98 16x19 in 4 3/8. |
|
b*e
发帖数: 3845 | 36 I recently strung my Microgel Prestige Pro with Gosen Micro 16g Main and
Yonex Tour Super 850 16g cross at 55lbs. I have played 3 matches with it. So
far the Multi 850 cross hasn't got fluffy yet.
NRG2 usually gets fluffy after 3 matches.
so |
|
b*********s
发帖数: 6757 | 37 you may also lower your weight to say 53 lb. 55lb is quiet high for poly,
especially when you first test out. |
|
b*********s
发帖数: 6757 | 38 同样拉55lb, 细线受得拉力比粗线大，打起来感觉会更硬。 之前好像这里有个物理学
家，观点和我相反。
我以前也和你想法一样，细线绑得比粗线紧一点点，结果感觉明显不好而且有此伤手臂
。Scholars can say whatever they like and back with whatever formula they
choose; my personal experience is loosen up the tension with higher gauge
strings. |
|
b*********s
发帖数: 6757 | 39 嗯，你说的对，“细线的变形程度肯定比粗线要大” ， 我的意思是细线的cross
section area 比出粗线小，同样55lb， 18g per area的力该比16g 要大， thus 容易
变形。 |
|
x*d
发帖数: 1696 | 40 I tried mine last night against ball machine. Melbourne is powerful, so
powerful that my drive is as fast as Ken's stroke, but many went out of
control. It's also hard to add heavy top spin.
I'm surprised to see such power on a 12oz(stung, 11.5oz unstrung) 6pt head-
light racket with 18x20 pattern. I'm using Tecnifibre NRG2 17 at 55lb.
Perhaps poly string or high tension will make control better. |
|
x*d
发帖数: 1696 | 41 yeah, that one is nice. I finally ordered Melbourne with Tecnifibre NRG2 17
at 55lb. will see.
I |
|
M******0
发帖数: 1280 | 42 我家小朋友最初用２１寸（walmart, 轻）用了１个多月，然后加入USTA membership
时送了一个PRINCE STAY&PLAY 23寸的，用了８个月，就开始用２５寸碳素的。一开始
没想花钱在拍子上。我现在体会是如果小孩能handle,早开始用２５寸。现在用的是
PRINCE TOUR ２５ 和REBEL ２５ 完全一样的。我在绑网线时才发觉tension 45-55lbs
. 后悔贪便宜贪轻 （小朋友长得瘦弱没力），教练说他的打法要tension 高一点。早
知就买babolat APD 25, tension 55-62lbs. 而且重一点会增加power and spin.
Online store: Tennis warehouse, tennis express, holabird sports, etc. |
|
d****t
发帖数: 1284 | 43 周末和一个球友的练习。录了一局半后相机没电了。
我因为脚腕有伤，不想多跑，所以老想进攻，而他为了压制我进攻，也老想抢攻，结果
就是我俩UE满天飞。
http://youtu.be/MP4BUQjAOF0
摄像器材是insideout版的架子+GoPro hero3+，用的是720p@120fps，效果不是很好，
上网查发现在室内低光时 要用30fps才能保证进光量。 另外insideout版的架子因为用
的是bottle holder，太大，不适合挂在钢索上，我改进了一下，下回试试效果怎么样。
这回PS95S穿的是Tourna black 7 main, Gosen synthetic cross，55lbs。使起来觉得
挺舒服，就是power有些大，下回上到57lbs试试。我现在觉得这拍子就是甜点小一号的
APD。 |
|
f*******s
发帖数: 3046 | 44 why is it that my ground strokes always end up near the service line. I can'
t seem to be able to produce deep shots unless I tell myself to aim at the
baseline corners. It feels like my racket doesn't have enough power, even
though it was just restrung at 55lbs (53-63 is the recommended range). Am I
just too weak? |
|
f*******s
发帖数: 3046 | 45 thanks. at 55lbs, the strings are already loose and shifting. |
|
s******y
发帖数: 161 | 46 我买的最简单的机器，第一次绑线，还是prince O3。 我有boomeranger. port不是问
题。
请教的问题是，那个tension完全没发控制呀。都得看自己的感觉。如果拍子和秤砣之
间的线长一点，那tension就很低。但是，我不敢把拍子和秤砣之间的线留很短，否则
感觉rod都没办法垂下去和桌面平行，tension很高，怕弄坏拍子。我设置的55lbs，现
在绑完了，感觉可能40都不到。
你们怎么控制tension的？ |
|
b*********s
发帖数: 6757 | 47 some Yonnex synthetic string (around 60lb i think), so I think if I switch
to my BHB7 poly, I should get a more crisp feel. Using my string tension
gauge, main is at 65lb, cross is at 55lb, so my guess the strung tension is
around 58lb to 60lb. For my next round of demo, I will cut the string and
strung with my own. |
|
b*********s
发帖数: 6757 | 48 这个不是绑线的磅数， 如果你的拍子main 和cross都是 55lb 缠的， 用tension
gauge tool 测量的话， main 会是60+lb , cross 会是50左右 （after 12 to 24hr) |
|
b*********s
发帖数: 6757 | 49 some Yonnex synthetic string (around 60lb i think), so I think if I switch
to my BHB7 poly, I should get a more crisp feel. Using my string tension
gauge, main is at 65lb, cross is at 55lb, so my guess the strung tension is
around 58lb to 60lb. For my next round of demo, I will cut the string and
strung with my own. |
|
b*********s
发帖数: 6757 | 50 这个不是绑线的磅数， 如果你的拍子main 和cross都是 55lb 缠的， 用tension
gauge tool 测量的话， main 会是60+lb , cross 会是50左右 （after 12 to 24hr) |
|
