w******i 发帖数: 429 | 1 想问下大家投影仪都是自己安装的,还是找人?
投影仪要是安装在天花板上的话,哪些配件哪里买啊?线和架子什么的~
还需要些什么啊?
list:
stud finder | l*****7 发帖数: 741 | 2 我自己装过一次,大概用了半天时间,大部分时间用在量准位置
你需要
一个投影仪支架用来固定在墙上
梯子
比较强力的钻机用来在stud打洞
【在 w******i 的大作中提到】 : 想问下大家投影仪都是自己安装的,还是找人? : 投影仪要是安装在天花板上的话,哪些配件哪里买啊?线和架子什么的~ : 还需要些什么啊? : list: : stud finder
| A*********l 发帖数: 2005 | 3 If you want to mount on ceiling: the following will work pretty well
1. Peerless PRGUNV Precision Gear Universal Projector Mount (for a 20-30lb
projector, it should work perfectly fine).
2. Peepless extension column (EXT 006, for example, or other length, you
have to decide based on ceiling height, how high you want to mount your
projector).
You don't need to buy 1 & 2 if your projector need to stay close to ceiling
height.
3. Peerless Ceiling Plate (Cmj 490, for ceiling joist with 24" intervals, or
other model for jost with other distance).
1, 2 & 3 are what I used. If you are going to mount your projector directly
against ceiling, you will mount item 3 directly to a single joist, this is
what its instruction manual says. This is not very good, in my personal
opinion. In that case, I would prefer attaching 3 to thick plywood using
strong bolts/nuts/washer and attach the plywood to two joists.
Not hard to do. Key thing is you have to find accurate ceiling joist
position, and make sure you use lag bolt that is strong and long enough.
To make sure you find the center of the joist, you can do the following:
1. Try to find joist using stud finder.
2. Confirm and find the edge of the joist by drilling using very thin drill
bit. Drill small holes to test where the edge is, and then you will be sure
to know where the center is. Do not just blindly trust stud finder.
【在 w******i 的大作中提到】 : 想问下大家投影仪都是自己安装的,还是找人? : 投影仪要是安装在天花板上的话,哪些配件哪里买啊?线和架子什么的~ : 还需要些什么啊? : list: : stud finder
| s*y 发帖数: 18644 | 4 no electric wiring for the 屏幕 auto-rolling up/down?
ceiling
or
【在 A*********l 的大作中提到】 : If you want to mount on ceiling: the following will work pretty well : 1. Peerless PRGUNV Precision Gear Universal Projector Mount (for a 20-30lb : projector, it should work perfectly fine). : 2. Peepless extension column (EXT 006, for example, or other length, you : have to decide based on ceiling height, how high you want to mount your : projector). : You don't need to buy 1 & 2 if your projector need to stay close to ceiling : height. : 3. Peerless Ceiling Plate (Cmj 490, for ceiling joist with 24" intervals, or : other model for jost with other distance).
| A*********l 发帖数: 2005 | 5 Use fixed screen if you can. It is better than pull up/down screen. Fixed
screen doesn't need that, unless you want the kind of fixed screen that has
masks so that you can have different screen aspect ratio (like 2.35:1 and 16
:9)
【在 s*y 的大作中提到】 : no electric wiring for the 屏幕 auto-rolling up/down? : : ceiling : or
| w******i 发帖数: 429 | 6 谢谢各位大侠~ 感觉挺难的:)
我们好好研究下。争取搞定了上个过程的流程图回馈版面~ | y*****7 发帖数: 1555 | | s*y 发帖数: 18644 | 8 有地方装fixed screen的话,用screen 背后的墙就可以了么
has
16
【在 A*********l 的大作中提到】 : Use fixed screen if you can. It is better than pull up/down screen. Fixed : screen doesn't need that, unless you want the kind of fixed screen that has : masks so that you can have different screen aspect ratio (like 2.35:1 and 16 : :9)
| A*********l 发帖数: 2005 | 9 A good screen is way better than a wall.
【在 s*y 的大作中提到】 : 有地方装fixed screen的话,用screen 背后的墙就可以了么 : : has : 16
|
|