i*****g 发帖数: 28 | 1 刚收到,半按快门和快门松开几秒时都有可以明显感觉到的‘滋’的噪音。应该是陀螺
启动和停止的声音。大家手里的小白兔也这德行吗? 我之前的大白就基本感觉不到这噪
音。 |
x5 发帖数: 27871 | 2 这不是防抖么,和陀螺有啥关系?
【在 i*****g 的大作中提到】 : 刚收到,半按快门和快门松开几秒时都有可以明显感觉到的‘滋’的噪音。应该是陀螺 : 启动和停止的声音。大家手里的小白兔也这德行吗? 我之前的大白就基本感觉不到这噪 : 音。
|
r***v 发帖数: 12658 | 3 IS?
把IS关了试试?
【在 i*****g 的大作中提到】 : 刚收到,半按快门和快门松开几秒时都有可以明显感觉到的‘滋’的噪音。应该是陀螺 : 启动和停止的声音。大家手里的小白兔也这德行吗? 我之前的大白就基本感觉不到这噪 : 音。
|
t*******8 发帖数: 7750 | 4 IS不都这样吗?
【在 i*****g 的大作中提到】 : 刚收到,半按快门和快门松开几秒时都有可以明显感觉到的‘滋’的噪音。应该是陀螺 : 启动和停止的声音。大家手里的小白兔也这德行吗? 我之前的大白就基本感觉不到这噪 : 音。
|
m******g 发帖数: 966 | 5 这个IS开着有什么副作用吗?为什么要设置一个开关呢?
【在 r***v 的大作中提到】 : IS? : 把IS关了试试?
|
r***v 发帖数: 12658 | 6 比如装脚架的时候
【在 m******g 的大作中提到】 : 这个IS开着有什么副作用吗?为什么要设置一个开关呢?
|
x5 发帖数: 27871 | 7 开这会防抖,要拍点艺术效果的就不行了
【在 m******g 的大作中提到】 : 这个IS开着有什么副作用吗?为什么要设置一个开关呢?
|
m******g 发帖数: 966 | 8 那只是用不上,但也不用关吧?
【在 r***v 的大作中提到】 : 比如装脚架的时候
|
m****7 发帖数: 14685 | 9 大白的is是没多大声,可是也没多大用啊,最多2。5档,小白兔4档呢。 |
i*****g 发帖数: 28 | 10 防抖是靠角速度传感器来探测手的晃动滴,角速度传感器里头有个陀螺,gyro, 只是觉
的启动停止噪音有点大。
【在 x5 的大作中提到】 : 这不是防抖么,和陀螺有啥关系?
|
|
|
m****7 发帖数: 14685 | 11 那可不一定,比如你要追拍的时候,防抖不关会杯具的
【在 m******g 的大作中提到】 : 那只是用不上,但也不用关吧?
|
r***v 发帖数: 12658 | 12 IS/VR处理不了三脚架的震动
供参考
http://zhidao.baidu.com/question/116367919.html
印象中说明书里有说上脚架的时候需要关闭IS
有些炮镜的设计是上脚架的时候也不需要关
Even with the 600 L IS mounted on a tripod, IS helps stop vibrations as the
IS version on this lens is tripod-sensing. The Canon EF 600mm f/4.0 L IS USM
Lens knows that a tripod is being used when vibrations go below a certain
level. Keep IS turned on when mounting the Canon EF 600mm f/4.0 L IS USM
Lens on a tripod to take advantage of this secondary IS mode - reducing
mirror slap, shutter and tripod vibrations.
http://www.the-digital-picture.com/Reviews/Canon-EF-600mm-f-4.0
【在 m******g 的大作中提到】 : 那只是用不上,但也不用关吧?
|
x5 发帖数: 27871 | 13 gyro能有那么大动静?
【在 i*****g 的大作中提到】 : 防抖是靠角速度传感器来探测手的晃动滴,角速度传感器里头有个陀螺,gyro, 只是觉 : 的启动停止噪音有点大。
|
m******g 发帖数: 966 | 14 有道理。那分档又是怎么用呢?小白兔四档,什么情况下用哪一档呢?
【在 m****7 的大作中提到】 : 那可不一定,比如你要追拍的时候,防抖不关会杯具的
|
m****7 发帖数: 14685 | 15 这就是1%。。。啊,直接拿640说事
the
USM
【在 r***v 的大作中提到】 : IS/VR处理不了三脚架的震动 : 供参考 : http://zhidao.baidu.com/question/116367919.html : 印象中说明书里有说上脚架的时候需要关闭IS : 有些炮镜的设计是上脚架的时候也不需要关 : Even with the 600 L IS mounted on a tripod, IS helps stop vibrations as the : IS version on this lens is tripod-sensing. The Canon EF 600mm f/4.0 L IS USM : Lens knows that a tripod is being used when vibrations go below a certain : level. Keep IS turned on when mounting the Canon EF 600mm f/4.0 L IS USM : Lens on a tripod to take advantage of this secondary IS mode - reducing
|
m****7 发帖数: 14685 | 16 1档=1/2曝光量。。。
【在 m******g 的大作中提到】 : 有道理。那分档又是怎么用呢?小白兔四档,什么情况下用哪一档呢?
|
m******g 发帖数: 966 | 17 谢谢,长见识了。
the
USM
【在 r***v 的大作中提到】 : IS/VR处理不了三脚架的震动 : 供参考 : http://zhidao.baidu.com/question/116367919.html : 印象中说明书里有说上脚架的时候需要关闭IS : 有些炮镜的设计是上脚架的时候也不需要关 : Even with the 600 L IS mounted on a tripod, IS helps stop vibrations as the : IS version on this lens is tripod-sensing. The Canon EF 600mm f/4.0 L IS USM : Lens knows that a tripod is being used when vibrations go below a certain : level. Keep IS turned on when mounting the Canon EF 600mm f/4.0 L IS USM : Lens on a tripod to take advantage of this secondary IS mode - reducing
|
r***v 发帖数: 12658 | 18 这个。。。因为看640的资料的时候看到这个了。。。
没注意别的炮镜是不是也这样。。
【在 m****7 的大作中提到】 : 这就是1%。。。啊,直接拿640说事 : : the : USM
|
h******i 发帖数: 1941 | 19 我的只有开始和结束防抖的时候有很大但很短的声音,半按快门的过程中几乎没有声音。
【在 i*****g 的大作中提到】 : 刚收到,半按快门和快门松开几秒时都有可以明显感觉到的‘滋’的噪音。应该是陀螺 : 启动和停止的声音。大家手里的小白兔也这德行吗? 我之前的大白就基本感觉不到这噪 : 音。
|
i*****g 发帖数: 28 | 20 所以才来问问大家手上的是不是也这样啊。is 的 gyro该有多大动静不知道,好像船上
的电罗经还是有点嗡嗡声滴....
【在 x5 的大作中提到】 : gyro能有那么大动静?
|
|
|
i*****g 发帖数: 28 | 21 那就放心了,半按才开始对焦啊,防抖才开始工作,松开快门几秒后防抖就停止工作,
都是为了省电。
音。
【在 h******i 的大作中提到】 : 我的只有开始和结束防抖的时候有很大但很短的声音,半按快门的过程中几乎没有声音。
|
m****7 发帖数: 14685 | 22 脚架模式xxbis都有吧。。。至少佳能4档那代的is都配上了
【在 r***v 的大作中提到】 : 这个。。。因为看640的资料的时候看到这个了。。。 : 没注意别的炮镜是不是也这样。。
|
m******g 发帖数: 966 | 23 声音的大小可能跟你手抖动的程度有关,多练练铁手功声音就小了。所以每个人手上小
白兔的声音是没有可比性的,跟各人的铁手功高低而异。呵呵,瞎猜一下。
【在 i*****g 的大作中提到】 : 所以才来问问大家手上的是不是也这样啊。is 的 gyro该有多大动静不知道,好像船上 : 的电罗经还是有点嗡嗡声滴....
|
r***v 发帖数: 12658 | 24 不太清楚。。。XXBIS的IS的模式有两个,具体干嘛用的不太确定。。。
N家一代18-200的防抖也是两个模式,一个是普通模式,一个是相机在横向运动的时候
用的
,比如坐在车上拍的时候,没有脚架模式
XXBIS有可能也是类似的作用
【在 m****7 的大作中提到】 : 脚架模式xxbis都有吧。。。至少佳能4档那代的is都配上了
|
x5 发帖数: 27871 | 25 VRII会自动检测是不是在脚架上
VR不行,上脚架是要关掉的
【在 r***v 的大作中提到】 : 不太清楚。。。XXBIS的IS的模式有两个,具体干嘛用的不太确定。。。 : N家一代18-200的防抖也是两个模式,一个是普通模式,一个是相机在横向运动的时候 : 用的 : ,比如坐在车上拍的时候,没有脚架模式 : XXBIS有可能也是类似的作用
|
r***v 发帖数: 12658 | 26 嗯,我说的是一代~~
【在 x5 的大作中提到】 : VRII会自动检测是不是在脚架上 : VR不行,上脚架是要关掉的
|
r***v 发帖数: 12658 | 27 说XXBIS的
For subjects moving in linear directions (even erratically), you might be
able to utilize the available IS Mode 2 (panning mode) which turns off one
axis of stabilization. I have not seen it formally stated, but I believe
this IS implementation is tripod-sensitive (most new versions are). Canon's
manual talks about turning IS off when utilizing a tripod to prevent
unnecessary battery drain (minor in my opinion), but it says nothing about
preventing bad IS behavior.
http://www.the-digital-picture.com/Reviews/Canon-EF-70-200mm-f-
【在 m****7 的大作中提到】 : 脚架模式xxbis都有吧。。。至少佳能4档那代的is都配上了
|
m****7 发帖数: 14685 | 28 印象错了。
s
【在 r***v 的大作中提到】 : 说XXBIS的 : For subjects moving in linear directions (even erratically), you might be : able to utilize the available IS Mode 2 (panning mode) which turns off one : axis of stabilization. I have not seen it formally stated, but I believe : this IS implementation is tripod-sensitive (most new versions are). Canon's : manual talks about turning IS off when utilizing a tripod to prevent : unnecessary battery drain (minor in my opinion), but it says nothing about : preventing bad IS behavior. : http://www.the-digital-picture.com/Reviews/Canon-EF-70-200mm-f-
|
r*********n 发帖数: 13992 | 29 这不是IS的声音,这是激光陀螺仪,知道不?
开玩笑的啊 |