h*******g
发帖数: 10585 | 1 http://www.rangefinderforum.com/forums/showthread.php?t=39491
It's a simple procedure to modify - there's one tab that engages the
frameline selector it's the only flange at right angles, I believe. Simply
take this flange straight back a little at a time, continually remounting it
until the 35mm framelines pop up instead. It you take it too far, the 28mm
framelines will come up, so be careful. Ideally you'd have a 35mm lens
already to compare the flanges. It's a very subtle different.
I would recommend covering the rear element with masking tape before filing
to prevent any metal shavings from getting in there.
Modification is easy like sockeyed described, three additions though: (1) I
recommend taking
the mount entirely off before you file, that way you don't get brass on the
glass. (2)
no worries about filing off too much, the 35mm frameline is brought up by
the shortest
flange on the M6 (it goes like this with decreasing length: 28/90, 50/75, 35
/135). (3) if you
ever want to use it on CL or CLE (an even better fit) don't shorten the
flange, since the CL/CLE
40mm framelines are triggered by the same flange length as the M6 50mm
frameline. | h*******g
发帖数: 10585 | |
|
