H********s
发帖数: 1024 | 1 把屁股磨去一段以后插到M口上，35mm frameline 总算出现比起default 50mm
frameline看上去舒服多了，而且出来的照片大小几乎跟FRAMELINE一摸一样 |
|
G********d
发帖数: 10250 | 2 这。。。
怎么有人frameline是35有人是40.。。
我听说过 35的frameline其实接近40 因为slide要crop
什么时候拍无穷远可以记录比较下
我在Hexar上用CV3514，带着眼镜，发现Frameline简直就是Perfect。这个东西很真是
挺看个人的。 |
|
n**b
发帖数: 13203 | 3 我在Hexar上用CV3514，带着眼镜，发现Frameline简直就是Perfect。这个东西很真是
挺看个人的。 |
|
h*******g
发帖数: 10585 | 4 http://www.rangefinderforum.com/forums/showthread.php?t=39491
It's a simple procedure to modify - there's one tab that engages the
frameline selector it's the only flange at right angles, I believe. Simply
take this flange straight back a little at a time, continually remounting it
until the 35mm framelines pop up instead. It you take it too far, the 28mm
framelines will come up, so be careful. Ideally you'd have a 35mm lens
already to compare the flanges. It's a very subtle different.
I would r... 阅读全帖 |
|
n*****e
发帖数: 5 | 5 借宝地问个问题，我的R-D1s用了快半年了，一直很正常，但最近开始练习手动曝光后
经常"过了片"换快门速度，今天把设置钮转了一大圈后突然快门按不下去了。后来轻轻
地抵住快门钮转了几下就好了，不知道为什么……
另外是镜头的选择，我一直以来都在R-D1上套了个canon 35/1.8，和35mm frameline不
很合，最近想进一个佳能7用这枚头，所以打算给r-d1弄个二手CV镜头。现在我有两个
选择：
1. SC或MC的 40/1.4；据说很合r-d1的frameline；
2. color skopar 28/3.5; 虽然带着眼睛看28mm框线有点辛苦，起码得到了42mm等效
了，比较喜欢这个焦段，可惜光圈小了。
请问大家的意见呢？另外有个人联系我说$275卖我个color skopar 28/3.5 w/ M
adapter，这个价格还okay吗？谢 |
|
D********r
发帖数: 343 | 6 干嘛不买新的Ultron 28/2。28/3.5唯一的优势就是小
借宝地问个问题，我的R-D1s用了快半年了，一直很正常，但最近开始练习手动曝光后
经常"过了片"换快门速度，今天把设置钮转了一大圈后突然快门按不下去了。后来轻轻
地抵住快门钮转了几下就好了，不知道为什么……
另外是镜头的选择，我一直以来都在R-D1上套了个canon 35/1.8，和35mm frameline不
很合，最近想进一个佳能7用这枚头，所以打算给r-d1弄个二手CV镜头。现在我有两个
选择：
1. SC或MC的 40/1.4；据说很合r-d1的frameline；
2. color skopar 28/3.5; 虽然带着眼睛看28mm框线有点辛苦，起码得到了42mm等效
了，比较喜欢这个焦段，可惜光圈小了。
请问大家的意见呢？另外有个人联系我说$275卖我个color skopar 28/3.5 w/ M
adapter，这个价格还okay吗？谢 |
|
x****y
发帖数: 1853 | 7 我主要喜欢m的纯机械，不用电池也可动快门。
焦距的话我更想用28mm或者35mm，r3好像frameline到不了28mm这么广。 能窃问你r3a
机身价位吗？ebay上好像500-600左右。
m3 |
|
x****y
发帖数: 1853 | 8 问题是M6也没有28mm的framelines好像。 |
|
s**********s
发帖数: 7387 | 9 you'll need practice a lot. since you can't do shift with these cameras, the
framing totally depends on the tilting of your camera - which is good.
find some reference points in your VF(e.g., breakpoints in the framelines).
open the back of the camera, stick a ground glass there, set the lens to f/8
and put the camera at bulb to keep the aperture open.
now place horizon at each of these reference points, the adjust GND till the
placement of the transition is perfect. mark the position of GND on |
|
s**********s
发帖数: 7387 | 10 could be due to either scanning or focusing.
i have some pics from G45 and they are extremely sharp. certainly among the
very best 35mm lense.
if contax was not stupid enough to make that ridiculous zoom viewfinder, but
rather use a regular albada VF with different framelines, G2 will be a
truly legendary camera.
not |
|
s*******g
发帖数: 3332 | 11 得看配哪个相机，如果相机没有40mm frameline，就还是买35吧。 |
|
a*f
发帖数: 5682 | 12 备机（ld用），这个机器一切都好，就是放大倍率太小，挂上CV35，我完全不会用那个
Frameline构图。
我准备M7+CV35/1.2 和Hexar + CV35/1.4, 双人旅游专用。 |
|
a*f
发帖数: 5682 | 13 新手弱问, 这个0.57放大倍率配一个50mm头的话,frameline才多大一点阿? |
|
b******a
发帖数: 1470 | 14 MSRP: $1000, announced at Fuji press conference [Source: BJP video]
Features [important to me]:
* Favorite functions assignable (?): to Fn button [left of shutter
release]
* Manual aperture selection possible: f2~16 + A
* Manual shutter speed selection possible: B~1/4000 + A
* Manual AF, AF-S, AF-C selection [body left edge]
* Manual AFL/AEL [back/right]
* Exposure compensation: +/- 2-stops in 1/3 stop
* E/OVF [0.5X]: 90% frameline coverage projected in OVF and 100% i |
|
x**0
发帖数: 6149 | 15 今天我的包里就塞了个35Ti
缺点：太大了，viewfinder里的frameline太多太杂，并且看起来不是很清楚 |
|
v****n
发帖数: 7841 | 16 对准肯定没有问题. 关键是it激活50mm frameline, 比较杯具. |
|
|
v****n
发帖数: 7841 | 18 M机身你用用就知道, 不管啥头上去, 变的只是frameline, 对焦不影响的.
如果是35框就想着小一点就行. 50的框因为在取景部分以内, 看着比较难受, 我个人觉
得. |
|
s***y
发帖数: 2607 | 19 1… Lug
2... Frameline lever
3... 镜头安装扭按钮
4… 后盖的螺丝
5… 压胶片的金属边
手机上小图就看出来这些 |
|
x**0
发帖数: 6149 | 20 " Please note earlier M3's could be updated by Leica and Leica authorized
repairmen with later M3 features. The most common updates were updates from
double stroke advance to single stroke advance, and the addition of the
frameline preview lever. " |
|
n**b
发帖数: 13203 | 21 我的意思是，不用上下左右移动就可以看到整个Frame，而且Frame外的指示都可以看见
。再大一点的话，指示就看不到了，所以说Perfect。对不带眼镜的来说不合适。 |
|
x**0
发帖数: 6149 | 22 M9上面不用finder也勉强可以用，就是别看frameline,而是看整个viewfinder，就是差
不多25mm啦 |
|
D********7
发帖数: 745 | 23
我现在M9还没到手 之前没用过旁轴 还不知道frameline啥意思。。。 呵呵 |
|
h******g
发帖数: 11250 | 24 不能
The M3 type will work on other M cameras, but it will bring up 50mm
framelines. The eyes can NOT be removed, else focusing errors will occur. |
|
v****n
发帖数: 7841 | 25 把viewfinder和rangefinder整合了，自带可切换的frameline，快速上片，新卡口，这
几个还是很重要的改进吧，尤其对于photojournalists来说，还是方便很多的。 |
|
|
c******s
发帖数: 5583 | 27 来自主题: _Rangefinder版 - 情况不妙
I am never a big fan of m6 :D .85TTL is nice but that's about it, unless
it has the MP finder.
The frameline is more accurate and bigger in the older models. The meter is
pretty nice in m6 ttl and later models but not 100% necessary. |
|
b******a
发帖数: 1470 | 28 和我想得一样。
m3已经在送往yeyouxin的途中了。
这个镜头能卖多少呢？
有啥性价比好的的m口头，适合m3 的frameline ?
多谢DR |
|
h*****e
发帖数: 439 | 29 you RF only has 50mm framelines? |
|
c******n
发帖数: 4965 | 30 zorki (and I guess Leica IIIa too ) has only a very small RF,
no frameline at all.
I guess I could "imagine" a frame line for lenses > 50mm
that's easy
but for < 50mm, I had to approximate the actual view space by extending
the current view from center. the ratio is easily calculated from simple
trigonomy |
|
