G***G 发帖数: 16778 | 1 how to drill a stright and deep hole without wood lathe or press?
only you have an electric drill.
Thank you. |
b**********y 发帖数: 7371 | 2 steady hands and levels on the drill
【在 G***G 的大作中提到】 : how to drill a stright and deep hole without wood lathe or press? : only you have an electric drill. : Thank you.
|
m********n 发帖数: 3812 | 3 apply 10wd 40, make level then measurements the correct center spot using
only ruler and circle gui. |
G***G 发帖数: 16778 | 4 right. we have to handle it with steady hands.
what do you mean by levels on the drill?
【在 b**********y 的大作中提到】 : steady hands and levels on the drill
|
m********n 发帖数: 3812 | 5 each time you drill, you get 0.1 exp points.
5 exp points to next level, then 10, 15, etc. |
g***e 发帖数: 4074 | 6 先用钻头钻一个开始的孔,然后找一根钻头粗细的直铁丝,烧红了开始一次一次地烙出
通孔。注意控制方向,不要从擀面杖中间就刺穿了。
最重要的是注意多加点机油润滑 |
G***G 发帖数: 16778 | 7 doesn't work.
【在 g***e 的大作中提到】 : 先用钻头钻一个开始的孔,然后找一根钻头粗细的直铁丝,烧红了开始一次一次地烙出 : 通孔。注意控制方向,不要从擀面杖中间就刺穿了。 : 最重要的是注意多加点机油润滑
|