o*****y
发帖数: 710 | 1 If anyone could tell me if this is possible, I would greatly appreciate it.
Home network question:,
on the cable modem / router that service provider gave me, there are four RJ
45 ports, I've called cable provider (Xfinity) and they said those 4 ports
behaves like switch.
I have a home network (another router) 192.168.1.x set up from one of the
port.
Is there anyway I can hook up Cloud server on the port of the cable modem /
router and my computer on the 192.168.1.x network can have access? How about
other device like printer? (all wired device, not wireless)
thank you for reading. | c**t
发帖数: 2744 | 2 完全可以，我就用一个带printer server的NAS drive，打印机联到NAS，可以按192.
168.#.#去打印。 | o*****y
发帖数: 710 | 3 谢谢，那是192.168.x.x只有最后一个x不一样，第三个x也一样，对吧，
是固定IP，不是DHCP,对吗？
【在 c**t 的大作中提到】
: 完全可以，我就用一个带printer server的NAS drive，打印机联到NAS，可以按192.
: 168.#.#去打印。
| l*****u
发帖数: 23 | 4 你的 router 上的插口构成了你的内部局域网，插在上面的设备都可以互相访问到，不
管是自动分配的 ip 地址还是手动设置的。至于ip 是后几位不同，与配置有关。 |
|
