c***h
发帖数: 577 | 1 这几天diver 这边的车窗上不去了,下来没问题, 上到一小半就不知卡哪了.要反复扳几下
才行. 后来发现在卡的时候,用手在车里向前推一下, 同时power window就上去了.
怀疑是不是门里固定window 的镙丝松了,想自己弄, 可怎么拆门呀? 又是diver 这边的,
里边连着一大堆线.
问dealer, 摆着要挨宰了.上次spark plug 坏了,凡跟打火有关的全换了, 花了$550.
请教各位大虾, 新手拆门的可行性.Bow~~~~ | s**********i
发帖数: 711 | 2
you don't need to touch the wires. normally inside the
door there are several screws, maybe hidden, take them
off then carefully pry off the inside panel along door
edges.
you don't have to do all things a dealer/shop tells you.
【在 c***h 的大作中提到】
: 这几天diver 这边的车窗上不去了,下来没问题, 上到一小半就不知卡哪了.要反复扳几下
: 才行. 后来发现在卡的时候,用手在车里向前推一下, 同时power window就上去了.
: 怀疑是不是门里固定window 的镙丝松了,想自己弄, 可怎么拆门呀? 又是diver 这边的,
: 里边连着一大堆线.
: 问dealer, 摆着要挨宰了.上次spark plug 坏了,凡跟打火有关的全换了, 花了$550.
: 请教各位大虾, 新手拆门的可行性.Bow~~~~
| a***n
发帖数: 1616 | 3 remove the triangular rubber cover at the inside front conner of the window,
you can locate it at the back of the side mirror.
remove any screws (visible or hidden in the handle/armrest) first
then remove the powerdoor/window switches
(sometimes you need pull foreward then outward or some way like that...)
disconnect the connector on the switches first before totally remove them,
then you won't worry about wiring.
after remove all connectors, switch panel/handle, arm rest...
pull the door panel
【在 s**********i 的大作中提到】
:
: you don't need to touch the wires. normally inside the
: door there are several screws, maybe hidden, take them
: off then carefully pry off the inside panel along door
: edges.
: you don't have to do all things a dealer/shop tells you.
|
|
