o******s
发帖数: 1364 | 1 2 fletched arrows, enter the target flat.
2 bare shafts, enter the target higher than the fletched ones, and with the
rear end lower than the tip. | T**r
发帖数: 7016 | 2 nock low, 把nock point调高一些，就是把DLOOP往上移，如果移不动，就重新绑DLOOP
。或者，把REST往下移。移的时候以1/16寸为单位，移了之后再试，再调。
the
【在 o******s 的大作中提到】
: 2 fletched arrows, enter the target flat.
: 2 bare shafts, enter the target higher than the fletched ones, and with the
: rear end lower than the tip.
| o******s
发帖数: 1364 | 3 But what about the bare shafts pointing upward? What does that imply?
DLOOP
【在 T**r 的大作中提到】
: nock low, 把nock point调高一些，就是把DLOOP往上移，如果移不动，就重新绑DLOOP
: 。或者，把REST往下移。移的时候以1/16寸为单位，移了之后再试，再调。
:
: the
| T**r
发帖数: 7016 | 4 看这个guide page 5
http://www.eastonarchery.com/img/downloads/software/tuning_guid
【在 o******s 的大作中提到】
: But what about the bare shafts pointing upward? What does that imply?
:
: DLOOP
| o******s
发帖数: 1364 | 5 Thanks, added to bookmark! |
|
