由买买提看人间百态

topics

全部话题 - 话题: stablized
首页 上页 1 2 3 4 5 6 7 8 9 下页 末页 (共9页)
c**r
发帖数: 10001
1
来自主题: PsychoAnalysis版 - [BSSD]我强迫症还有其他体现,帮我看看
你把mood stablizer停掉,下次出现manic episode咋办呢?人很难自己意识
到的.
基本上,背着医生自己停药,就不是个wise decision,如果对药有疑虑,多
跟医生沟通,有therapist也可以多跟therapist聊你的一些concern和与药相关
的其他情绪和想法,为啥想停,停了如何应对可能的反应等. 药刚停掉时情况
还行不说明就ready停了,可能是药的half life够长,还没完全从你system里
洗掉,也可能是你这段时间刚好比较稳定. 你在"停药会有啥结果"这个问题都
没跟你医生问明白的情况下就停药,我觉得真的轻率了些哦.
e****e
发帖数: 3450
2
来自主题: PsychoAnalysis版 - [BSSD]我强迫症还有其他体现,帮我看看
顺着幻觉在高速公路上逆向行车,驾照没收,被DA两个misdemeanor起诉,请律师花了
好久才把驾照拿回来和罪名除掉。你正常的时候是不会告诉别人你偷偷停药了的,但是
mania状态下你会很自豪的告诉警察自己没吃药。没吃药就要对自己的行为responsible
了。你自己发过病也是知道的,幻觉状态下会失去正常人的判断力,作出一些别人看起
来很奇怪的事∥我自己事后看警察报告,都吓得半死,当时要是85mph跟人对撞,那就
命都没了,还不止是我自己的命。。。
lamictal已经是mood stablizer里面副作用很小的了,停了发病真的不值得。我停了6
年停了两次,两次都是几个月之内出现幻觉。真的是伤不起啊,去年take了一年的
partial disability,现在又得找工作。再停药的话,驾照再被没收就拿不回来了,医
生说了停药就再也不给我开证明了。
我这真的是血的教训,虽然我自己很多时候都很想停药,mania时候的幻觉太美好了,
就跟毒品一样让人上瘾,而现实状态又是很让人depress的。
所以坚持不停药是要很大的意志力的,就跟看着毒品不吸一样。每次想停药的时候想想
自己上次闯了... 阅读全帖
e****e
发帖数: 3450
3
来自主题: PsychoAnalysis版 - [BSSD]我强迫症还有其他体现,帮我看看
以后再稳定一些的话,医生应该会吧resperodol停了,把lithium换成副作用小一点的
mood stablizer比如lamictal
d*****9
发帖数: 3459
4
来自主题: Thoughts版 - JFK
八马够lucky选上了美国总统,但是接收了个烂摊子,到现在都没stablize住。他个性
不够强硬,debt ceiling的事就可以看出来。希拉里govern的能力应该比他强。
O*******o
发帖数: 7091
5
来自主题: Shanxi版 - oldogzhao快来看
particle size was bigger in Fig.1 (50-100 nm) than Fig 2 ( <10 nm). did you
use higher concentrations of the reactants (precusors???) for Fig 1, or less
stablizers
m*y
发帖数: 5861
6
【 以下文字转载自 LosAngeles 讨论区 】
发信人: CLuo7 (只羡鸳鸯不羡仙), 信区: LosAngeles
标 题: 推荐2010Mazda6 Sport AutoTrans哭胖$5100月供$270
发信站: BBS 未名空间站 (Tue Dec 21 14:57:57 2010, 美东)
这款车非常不错,和2010 Mazda 6 Touring相比,基本一样,不同的仅仅是:
-非电动座椅
-轮胎窄一点P195,非P225
-轮胎是Steel wheel,非Alloy wheel
-内装饰差一点点
-车价低 $1,500
此车很合适作上下班通勤commute.
基本性能:
-2.5 L engine, 4cylinder, 170HP, auto transmission, 4dr sedan
-6 air bags(front, side, curtain), H top strong frame, safety rating 5 stars
-6 CD changer, 6 speakers
-power windows, doors, locks, re... 阅读全帖
a***y
发帖数: 19743
7
来自主题: Apple版 - 消费者反应有待观察
我觉得一个4" egde to edge的retina + iPhone 4大小和形状,我就一点都不失望
Siri
new camera
A5 dual core
iOS
iCloud
这些都我都不失望的。
如果内存只有512MB会有点失望。
新的video stablization也是非常好
a***y
发帖数: 19743
8
来自主题: Apple版 - 4S的一些更新
Bluetooth 4.0, up from BT 2.1+EDR
Talk time, 1 hour more
Video stablization
playback 1080p H.264
a***y
发帖数: 19743
9
video stablization is very good.
s*i
发帖数: 5025
10
Image Stablization。
跳的时间点是不是同一个?
w********2
发帖数: 16371
11
iphone5在camera 上还是进步一些:
1. faster capture of photos.
2. better noise reduction
3. better low light.
4. panorama mode.
5. 加了个crystal cover
6. A6 smart filter
7. better video performance: video stablization
8. facial recognition
比较重要的是better low light,不知道能好多少,没有sample 看,如果和lumia 920
比不知道是否能比的过。
A*******m
发帖数: 2326
12
发信站: BBS 未名空间站 (是的,auto image stablizer
st
发帖数: 1685
13
来自主题: DotNet版 - memory leak
how to loadtest? you mena just keep it running?
it's funny that I disabled most part of it, still show some memory leak.
btw, the memory usage has stablized after the force full GC code...
it's really weird since I've never seen a c# program behaves like this b4..
k****i
发帖数: 1072
14
来自主题: DotNet版 - memory leak
What do you mean stablized after GC, do you only mean that GC collects all the
memory back or after GC it never leak again?
As far as I know, GC sometimes is not fast enough to collect all the garbage
and it may cause out of memory problem. the only thing you can do is to change
the design


GC以后好了一些,但是感觉还是有点问题,请问你们都用什么查memory
x*********n
发帖数: 28013
15
应该不会,对吗?
小弟不是很确定啊。。
s*****g
发帖数: 1055
16
It depends.
x*********n
发帖数: 28013
17
大牛,指点一下嘛。
新人很惨的。
s*****g
发帖数: 1055
18
If all ABRs have proper summarization configured then any area-scope LSA
changes won't be translated/propagated to backbone, right?
b*******s
发帖数: 182
19
来自主题: Hardware版 - Which hard drive should I buy? (转载)
OEM use better parts (the process has been optimized and stablized)
retail version mormally use initial development parts
OEM drive have more strict evaluation because it is for OEM (large volume
buyer like Dell, HP...)
i am in this industry
D*******a
发帖数: 3688
20
相比之下blackwidow ultimate的包装帅多了,还有背光。另外,bw的键盘线也结实很
多,跟麻绳一样。
当然,filco键盘本身比bw好。对比之下我感觉自己更喜欢茶轴多一些。我不知道大键
的stablizer是不是优点,但是我个人感觉很满意,因为我按spacebar总是在一边按的。
P*****C
发帖数: 105
21
来自主题: Hardware版 - r7000挺joke的
是你中文不好還是我中文不好,我都說了R7000不推荐,不是ac68u。
R7000在Tomato下面有ping issue. 會有延時,必須要重啟很多次直到ping stablize.
m***t
发帖数: 254
22
what exactly do you want to do then? what is your career goal? do you want
to be a good system programmer? Server/desktop operating system, as a
industry, is pretty stablized and going away. If you are a good system
progreammer, vmware/cisco/jupiter/nvidia all need such people.
m******5
发帖数: 1383
23
来自主题: Biology版 - Nuclear actin distribution
I happened to be reading a review article published 1 year ago talking about
that actin play a very important role inside cell nuclear, by recruting
Nuclearsome remodeling complex or stablizing pre-mRNA.
But there isn't any NLS harbored on actin, and it has been proved that actin
can not migrate into cell nuclear on their own. So, how come a little
amount of actin leaking into cell nuclear can have so significant function?
On the other hand, did anyone ffind that different isoforms of actin have... 阅读全帖
c**********o
发帖数: 69
24
NaCl : shielding effects/stablize protein

site
n********k
发帖数: 2818
25
来自主题: Biology版 - pBabe可以做lentivirus表达吗?
I doubt you have done the readings...In short, yes and no...For some, the
lenti packging can be used for Retro(pbabe). So for dividing cells, doesn't
matter much for the infection/integration; However, for non-dividing cells,
presumably no big difference with infection but a huge difference with
integration step(nuclear entry step--which is essentially the key difference
between the two)...So essentially western doesn't tell you much here...
unless they stablize.
BTW, contrast to the common beli... 阅读全帖
n********k
发帖数: 2818
26
来自主题: Biology版 - 见到了传说中的牛人
I was thinking with yeast, can we direct evolution with or without
selection pressure, can epigenetics eventually stablize and become genetic..
.电子生命的进化, how?
BTW, do you have the paper link for the above mentioned study, or it is
still going?
S*********s
发帖数: 304
27
请教做cell cycle的大拿~
有没有在mitotic phase or cytokinesis过程中stablize的蛋白~最好是通过post-
translational来调节的
如APC control G1 phase,SCF control S/G2/M phase的蛋白~
Thanks
y***n
发帖数: 11261
28
来自主题: Chemistry版 - 大家有机都蒸溶剂不?
有的溶剂有stablizer,不光是除水和价钱的问题,还是蒸的好。不放心可以先核磁看
看。
b**********n
发帖数: 34
29
来自主题: Chemistry版 - Fasified JACS PAPER.
Using the solution stablized with 1 microM melamine to assay the melamine
with the concentration in nanoM range. This
really likes using buffer solution to measure acid and base in solution.
This is strong evidence to claim that authors fictionalized their data.
n*****g
发帖数: 4117
30
☆─────────────────────────────────────☆
Synthon (合成子·清华高分子五十年!) 于 (Fri May 15 17:23:17 2009) 提到:
发信人: Synthon (合成子·清华高分子五十年!), 信区: Macromolecules
标 题: 实在不能忍一些人瞎扯了
发信站: BBS 未名空间站 (Fri May 15 17:21:18 2009), 转信
某篇文章,用polymer stablize nanoparticle in solution
因为目的是做催化,所以要除掉polymer
作者说从实用角度出发,应该尽可能的少用polymer
这没错
但是你猜作者接下来说啥了?
作者说,我们发现,用Mw=360k的polymer代替Mw=40k的polymer,那么所需polymer浓度
可以降低10倍,有效的减少了polymer的用量
然后俺擦了擦眼睛,仔细得看了好几遍,又用作者给的加料量自己计算了好几遍(因为
伊没有明说他降低了10倍的那个浓度到底是啥浓度),伊讨论的浓度,果然是摩尔浓度!
你丫把分子量提高了
s**********8
发帖数: 25265
31
来自主题: Chemistry版 - HPLC 高手帮忙看看SCX column
baseline for IC is hard to stablize. need run hrs to overnight to reach a
stable baseline. suppressor may get better after being used for a while.
monitor total conductivity during the run
v*********r
发帖数: 184
32
来自主题: Chemistry版 - 请问关于 carbon fiber
我的意思是美国不生产Rayon based carbon fiber,书上看来的,不知道是否正确?
能否指点一下到底如何判断炭纤维的前体啊?光从morphology看得出来么?还是要做
tensile strength?但是stablization 和 carbonation process可以改变得到不同性质
的碳纤维。
谢谢!
q**i
发帖数: 174
33
来自主题: Economics版 - Can a small country have a stable economy?
One question I have been thinking about is this: is it
possible, in today's world, for a small economy
to be stable?
What happened in Hong Kong is indicative of how powerful
free flow capital can be. With abundance of speculative
flows of money, it will be very difficult to stablize
any economy, short of removing itself from the global
chain.
For an economy that's small, and perfectly in sync with
its fundamentals, and allows a free market and perfectly
convertible currency, speculators could in
c******a
发帖数: 725
34
来自主题: Economics版 - 请教一个宏观经济学问题
In short run, consumption is important to stablize economy.
In long run, investment is important for economic growth.
y*********n
发帖数: 22
35
单端输出一样要stablize the DC output point吧。。。
m*****n
发帖数: 166
36
depending on what thickness you want to etch, you can even use regular
photoresist to do the dry etch. Some photosensitive polymers, such as bcb,
polyimide, are also good choices.
All about selectivity!!!!
You can use CH4 and hydrogen to etch III-V materila typically. Ar can always
be added to stablize plasma and add some directionality in etching.
Using Cl2 and Ar can get very unisotropic profile.
w**g
发帖数: 50
37
来自主题: Environmental版 - 有人做VOC SPME GCMS的吗 请教问题
You may have a few problem in your experiemnts:
1), 5L/min flow may be too high for your SPME fiber;
2), Let the mixture stablize for some time before sampling;
3), Use "right" SPME fiber, for pinene PDMS/DVB should work;
4), Many compounds including pinene are very sensitive, even after they are
absorbed onto the SPME fiber, see if you see some degradatioon products;
5), You GC condition, especially intector condition, has huge impact on your
results;
6), Have to be consistant for your sampling... 阅读全帖
h****u
发帖数: 2
38
来自主题: Macromolecules版 - questions about silica colloidal
LUDOX® AS-30 colloidal silica, 30 wt. % suspension in water
it is said it is stablized by ammonium counter ion. Does that mean it is
positively charged? Thanks
S*****n
发帖数: 6055
39
来自主题: Macromolecules版 - 实在不能忍一些人瞎扯了
某篇文章,用polymer stablize nanoparticle in solution
因为目的是做催化,所以要除掉polymer
作者说从实用角度出发,应该尽可能的少用polymer
这没错
但是你猜作者接下来说啥了?
作者说,我们发现,用Mw=360k的polymer代替Mw=40k的polymer,那么所需polymer浓度
可以降低10倍,有效的减少了polymer的用量
然后俺擦了擦眼睛,仔细得看了好几遍,又用作者给的加料量自己计算了好几遍(因为
伊没有明说他降低了10倍的那个浓度到底是啥浓度),伊讨论的浓度,果然是摩尔浓度!
你丫把分子量提高了9倍,又把摩尔浓度降低了10倍,你自己算算你的polymer用量到底
少了多少??!!
附:文章链接:
http://www.pnas.org/content/105/40/15241.abstract
k*******n
发帖数: 2399
40
来自主题: Macromolecules版 - 问一个聚合速率的问题
本人本身不是做高分子聚合的,只是在一个particle stablized emulsion体系里面用
了styrene作聚合单体。发现增加里面的particle浓度导致聚合速率降低,该particle
是7% 的SWNT负载在SiO2上。增加particle浓度从表观上是减小了聚合物颗粒的大小(~
um)。我看见不少emulsion polymerization都是增加particle浓度增加了反应速率,因
为emulsion droplet变小的话会导致反应体系compartamentalization降低bimolecular
termination的可能。我现在怀疑是不是该颗粒会quench聚合的radical,本人用AIBN
作为引发剂。该颗粒具有SWNT, COOH, Co, Mo和SiO2在表面上。本人提出另外一个可能
是emulsion drop变小,减少了monomer bimolecular reaction的速率。 那种更具有可
能性。先谢谢了。
k*******n
发帖数: 2399
41
来自主题: Macromolecules版 - 问一个聚合速率的问题
为什么用引发剂不同就不是emulsion polymerization了?是不是emulsion
polymerization应该是由反应体系本身决定的吧?不同的是我用了SWNT/SiO2
nanoparticle作为emulsion stablizer。 体系见Http://pubs.acs.org/doi/abs/10.1021/la901380b。我目的是为了用这个emulsion system可以不需要加入表面活性剂直接制备sphere-size的CNT/Polymer composites。在解释的时候,比较迷惑的是为什么particle加入多会导致styrene conversion速率降低。
a*****a
发帖数: 210
42
来自主题: Macromolecules版 - polymer和oxide混合后为什么会分相呢
carboxylic acids chelates with Al3+.
Your CMC(carboxylmethyl cellulose) is very possible have free carboxylic
acid especially when you made it acidic.
In Pressure Sensitive Adhesive industry, Al3+ is used to gel polymer
containing free carboxylic acid.
Acetylacetone can stablize the Al3+. After addition of enough Acetylacetone,
Al3+ will not gel carboxylic acid containg polymer at room temperature.
However, if you evaporation the Acetylacetone, you will get gel.
a*****a
发帖数: 210
43
来自主题: Macromolecules版 - polymer和oxide混合后为什么会分相呢
carboxylic acids chelates with Al3+.
Your CMC(carboxylmethyl cellulose) is very possible have free carboxylic
acid especially when you made it acidic.
In Pressure Sensitive Adhesive industry, Al3+ is used to gel polymer
containing free carboxylic acid.
Acetylacetone can stablize the Al3+. After addition of enough Acetylacetone,
Al3+ will not gel carboxylic acid containg polymer at room temperature.
However, if you evaporation the Acetylacetone, you will get gel.

发帖数: 1
44
来自主题: MedicalCareer版 - step 3 经验分享
adeno (天夺其魄) 于 (Wed May 6 16:22:43 2009) 提到:
成绩出来了,涉险挤入了99队伍。总的来说,准备的不是很充份,详见以前贴的"我
的step 3经历",主要是在吃CK的老本;其他乏善可陈,成绩单里唯一的一个星号是
给了CCS,这里就说一说CCS好了。
以前总把CCS和CS混淆,其实这两个有一个共同点就是open choices和uncertainty。在
这总场合,最重要的可能就是要有一个严格的protocol,这样可以尽量避免遗漏。考过
CS的同学都知道LIQOR AAA和PAMHUGSFOSS的重要性。CCS也一样。网上比较流行的是
Neeraj的protocol,用google一搜就能找到。非常有用。我把他的protocol稍微整理了
一下,自以为是更加简洁有条理一些。给几个朋友用了用,有的朋友觉的没有时间应用
,有的朋友用了觉的还成,让我贴出来,最后的决定是如果考出来还行就贴,要不就不
出来吓人了。
象CS一样这个protocol充满了mnemonics,开始考试之前第一件事就是把所有的
mnemonics写下来。下面9个case都可... 阅读全帖
首页 上页 1 2 3 4 5 6 7 8 9 下页 末页 (共9页)