e****t
发帖数: 17914 | 1 Late last month, NPD DisplaySearch analyst Richard Shim reported that
suppliers had begun production on 2560x1600 display panels destined for a 13
-inch Retina MacBook Pro. The machine has been rumored to be launching in
October.
Digitimes now reports that full production on the 13-inch Retina MacBook Pro
is underway with shipments from Apple's supply chain beginning to ramp up
ahead of a claimed September or October launch. The report also claims that
production on updated iMac models is rampin... 阅读全帖 |
|
s***n
发帖数: 76 | 2 you know Shim? she's coming to our dpt... |
|
|
|
|
r******y
发帖数: 21907 | 6 你最好表吃啊，现在开始应该一切有机。。。。。
subscribe |
|
|
r******y
发帖数: 21907 | 8 你没毒你攻啥啊，为宝宝着想了，都有防腐剂，表吃的好 |
|
|
|
|
B*******e
发帖数: 3882 | 12 http://news.cnet.com/8301-13579_3-57447957-37/leaked-spec-label
"Putting it in nearly the same league as the MacBook Air, the new 15-inch
model is described in the image as being 0.74 inches thick and weighing 4.7
pounds (the current model is 0.95 inches thick and weighs 5.6 pounds).
In addition to four USB 3.0 ports, it would also feature a 2560x1600 high-
resolution Retina display that up until now have only been available on
Apple's iPhones and iPads. NPD DisplaySearch Senior Analyst Richard ... 阅读全帖 |
|
w***z
发帖数: 1848 | 13 最近在改前人的code，觉得很多地方，尤其是系统架构方面，大到整个系统分几层几个
component，小到两个component之间shim layer里的API，都可以有不少改进。能不能
推荐一些有关软件系统架构方面的书，可以加深一下这方面的功力呢？ |
|
m**t
发帖数: 1292 | 14 我以前都是用SHIM device driver在里面自己填发包，这个算很简单的了
有一种方法不知道你是否适用，可以直接设置IP, 这样就trigger gratuitous ARP |
|
|
w***z
发帖数: 1848 | 16 【 以下文字转载自 CS 讨论区 】
发信人: windz (风子), 信区: CS
标 题: 推荐一下有关软件系统的书吧
发信站: BBS 未名空间站 (Sun Feb 1 16:20:09 2009)
最近在改前人的code，觉得很多地方，尤其是系统架构方面，大到整个系统分几层几个
component，小到两个component之间shim layer里的API，都可以有不少改进。能不能
推荐一些有关软件系统架构方面的书，可以加深一下这方面的功力呢？ |
|
l**********n
发帖数: 8443 | 17 这个多数情况是你的dependency没有弄好，以至于依赖于loading的顺序，看看
requrejs的config，比较下不同的UI，libraries的loading的不同情况。这跟
requirejs没有关系，是你自己dependency没有设置好。另外就是shim的exports。如果
exports是nothing，那么就到global去找。 |
|
|
|
s*****g
发帖数: 87 | 20 Hepatology. 2013 Jan 16. doi: 10.1002/hep.26237. [Epub ahead of print]
Efficient drug screening and gene correction for treating liver disease
using patient-specific stem cells.
Choi SM, Kim Y, Shim JS, Park JT, Wang RH, Leach SD, Liu JO, Deng CX, Ye Z,
Jang YY.
邮箱：s*********[email protected]
谢谢！！ |
|
g*****g
发帖数: 5 | 21 麻省大学的Jae-Hyuck Shim, 韩国人，超级无敌恶心、变态，满嘴谎话、擅长造假、剽
窃，去他实验室，职业生涯基本断送。 |
|
S******i
发帖数: 71 | 22 应该把自己的出生告诉大家，不要空对空，要留下学校的阳西地址，还有最好把系主任
的联系方式也放这里
Guo Huang Ph.D.
Assistant Professor
CVRI Investigator
Website
Research Interests:
Comparative study of heart development and regeneration, ischemic heart
diseases, stem cell, cardiomyocyte proliferation, regenerative biology
Program Areas
Vascular Biology and Atherothrombosis
Developmental Biology and Congenital Anomalies
Channels and Arrhythmias
Muscle Biology and Heart Failure
Prediction and Prevention of Cardiovascular Disease
Research Summary
... 阅读全帖 |
|
b*******r
发帖数: 1073 | 23 ft. I typed in a lot of Chinese, but all gone. sorry for the poor English,
and correct me if what I said is wrong.
D7 is tao, I didn't get it, why T1 = 1.4 D7? How did you measure T1?
As previously said, T1 depends on many factors including temperature,
concentration sample state (degass or not, etc.), magnetic field ... your
values looks not too unmoral to me.(but you better read more papers)
serious quantitative 13C NMR does have many tricks, like instrumentation(
like shimming, pulse calibrat |
|
m****n
发帖数: 8 | 24 应该是单峰的，现在列分成了双峰，这是什么问题造成的？谢谢了。 |
|
|
m*******a
发帖数: 245 | 26 我看到的是一个主峰边上有两个小小的峰，还是对称分布的，这个不知道什么原因，高
手提供以下解决办法。 |
|
s*******h
发帖数: 3731 | 27 那叫 satellite peak？ C13引起的？ |
|
|
|
|
|
|
|
t******o
发帖数: 467 | 34 In my practice, grout thickness should not over 1.5'' inch. Other than
concrete, another way you can consider is to use a few steel shim plates to
make up the elevation difference.
grout |
|
T****o
发帖数: 716 | 35 关键看erector用不用leveling nuts，如果用，有时会需要到2 in厚的grout。
有时即使你图纸上说用，天知道，人家还嫌花钱、麻烦，用shim plates好像是比较多
些。
to |
|
t***u
发帖数: 20182 | 36 一般是因为浓度太高了。轴shimming不好也有可能是原因之一。 |
|
t***u
发帖数: 20182 | 37 PEO-OH的峰就是就是要偏高场一些，2左右很正常，可能就是shimming不好的缘故，或
者有一些OH-PEO-OH |
|
c****r
发帖数: 13 | 38 用 LS-DYNA 里面就有好几个橡胶的模型，前处理软件ls-prepost里面直接就可以用了
，不需要自己写UMAT；模型的参数可以在ANSYS的帮助文件里面找到。
如果需要弄懂模型的原理，请看这篇文章，很详细：
A visco-hyperelastic approach to modelling the constitutive
behaviour of rubber
L.M. Yang, V.P.W. Shim*, C.T. Lim
International Journal of Impact Engineering 24 (2000) 545}560 |
|
x*******y
发帖数: 15 | 39 Title: High-Temperature Stability of Silicon Carbide Nanowires
Author(s): Shim HW, Kuppers JD, Huang HC
Source: JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY Volume: 8 Issue: 8
Pages: 3999-4002 Published: AUG 2008 |
|
i*********5
发帖数: 19210 | 40 David Millar’s Minimalist Pad Setup
Most riders opt to use clip-on time trial bars on a road bike for hilly TTs,
but they are always trying to save weight. Mechanics come up with some
ingenious solutions for arm pads. One of the lightest and cleanest was this
setup on The Cervelo S5 that Garmin-Sharp’s David Millar rode. His
mechanics created a curved shape by shimming pads, which they secured with
electrical tape and velcro. We also saw bikes with zip ties attaching bare
pads and pads with the ... 阅读全帖 |
|
n***o
发帖数: 210 | 41 Yes, brake job is not as easy as someone might think.
The easiest part is to replace the pads and rotors. It is other important
steps that are usually overlooked by ordinary DIYers.
1. One has to check the condition of the caliper every time a brake job is
done. Check the seals of the calipers as well as smoothness of the piston
operation.
2. Special brake grease has to be applied in between the brake pad backing
and the anti-squeal shim.
3. Sliding pins and the rubber sleeves have to be thoroug |
|
H*****L
发帖数: 5705 | 42 shim/bracket? 是这个东西垫太多造成PAD的魔个点摩擦ROTOR?
and-brake-clip-5570-150x150.jpg |
|
r*******1
发帖数: 4394 | 43 如果刹车不抖，可能是因为shim和pad之间需要抹点lubricant。呵呵，瞎猜的，我也不
知道。 |
|
f********m
发帖数: 8397 | 44 http://www.autoblog.com/2010/03/23/report-toyota-to-replace-pedals-for-
owners-not-satisfied-with-f/
According to a Toyota memo first obtained by the New York Times and
later reported by the Associated Press, Toyota is currently notifying
dealers that a replacement pedal can be installed at no charge to owners
of recalled Toyota products if the owner is not satisfied with the
current fix for the problem.
Most vehicles involved with the pedal recall have been fixed by
inserting a metal shim into |
|
|
|
l**********l
发帖数: 4468 | 47 你下次想搞我教你。
唯一需要注意的地方是刹车片每边两块后面的shim是不一样的。caliper的pistons买个
几块钱的c-clamp压回去就好了，刹车液会往回推一些可能会从master cylinder的
reservoir流出来一点（盖子打开）。
每侧一共就2个bolt需要拧。刹车盘也换的话4个bolt。
caliper要换的话多一个连着brake line的banjo bolt需要拧，这个换完要flush brake
fluid。最好用跟你车子现有刹车液颜色不同的刹车液，这样好观察是不是换干净了。
两个人搞就很容易，一个人刹车踩到底，另一个人松开bleeder bolt（上面套一个透明
橡皮管，好观察气泡），气泡出来以后关上bleeder bolt，另一人松开刹车；重复直到
没有更多气泡跑出来。重复其他三个轮子。具体四个轮子怎么个顺序每个车不一样，查
下你车手册。一般原则是从最远离master cylinder的轮子开始弄。注意master
cylinder reservoir要不断加刹车液，快见底了就要加，不然master cylinder进空气
就要单独bleeder m... 阅读全帖 |
|
