a****t
发帖数: 191 | 1 请大家评论一下，谢谢。
details:
Which vehicles come with the Lifetime Warranty?
The Warranty applies to all new vehicles. It also applies to select pre-
owned vehicles that are current model year or 4 prior model years old with
less than 50,000 miles, have passed our Lifetime Warranty certification
program and a CarFax or similar inspection. These models are: Toyota, Honda,
Nissan, Mitsubishi, Mazda, Hyundai, Subaru, Isuzu, Suzuki, Acura, Lexus and
Infiniti.
What's covered under the Lifetime Warranty? The ... 阅读全帖 |
|
ET
发帖数: 10701 | 2 hehe. also don't sell your cleveland fairway wood. If u don't like the shaft
of your current set, i can trade my stiff shaft 3 wood (brand new )back to
ur fairwood .hehe . I like regular shaft.
yah. don't try the blades until you are really good. it just hurts your
passion to the game.
In my bag,
Driver: Cobra offset M speed 460cc driver with Aldila stiff shaft (50g) for
110-140mph ball speed (tiger's ball speed is around 220mph) , and low kick.
for some reason, I really like light shaft. when |
|
ET
发帖数: 10701 | 3 graphite is kind of typical shaft nowadays for all drivers and fairwoods. i
am curious why the steel shaft is still being made. I barely see anybody
uses it.
graphite shaft provides more flexilibity, like the kick point is easy to
change, weight can be adjusted, so does the flex.
really i don't know if the steel shaft can have the same charactiersitcs as
the graphite. Some heavy powerful guys might still use the steel shaft. just
my specutation. |
|
ET
发帖数: 10701 | 4 我都不知道r9 长啥样。
r5/r7的stock shaft (stiff, 60 gram还是65 gram) just fits me so well.,
说实话，以我现在的水平，还是感觉得出shaft的影响。
2大经典shaft, 一个可能就是r5/r7用的stock shaft,这个不是我说的。但当年r5流行度
可真不低。另外一个就是我woods上用的adilva的green 系列。 65 gram, mid kick, 当
时在ebay上真好卖。
我上次贴的video里有个老头叫larry, 也打过usga的，把他的球杆全换成这个green sh
aft.
burner我还看不惯那长相。球杆设计没有swing indication.
我个人觉得比较好的还有titleist的，titleist的球杆头变化不大。打得好的时候那可
真是脆。这是他好过tm的地方。
总体来说，我这还是感官派的。本质上，球杆doesnt' make difference. shaft和人的
physical capabiity有关，所有那个有区别。
w |
|
ET
发帖数: 10701 | 5 我用的tm oem的shaft不记得是那个shaft了。
driver 8.5度还是过了， 如果shaft硬，球很难launch起来。指lanuch，不是skied
iron我建议你换了。我还是真能感觉出差别。你的iron 的shaft挥起来就想mentius啥
的那个能弯几段的训练工具一样。
如果用很smooth的动作，估计shaft和club head能协调上。
. |
|
b*******e
发帖数: 724 | 6 在EBAY上拍了一套690CB的铁杆,才$150,而且是TT BLACK GOLD.我原来就用690CB,但是R
FLEX DYNAMIC GOLD的,用了3年.随着距离不断增长,感觉这套SHAFT有点不太适合了,经
常会HOOK,几乎从不SLICE. 在TT的网上做了个ONLINE FITTING,结果是S FLEX. 因为对
690还是很喜欢的,于是决定买套2手的690,S 的就行了.到EBAY上一找,刚好发现一套,但
是BLACK GOLD.当时都没听说有BLACK GOLD这个SHAFT,现去网上查,结果发现BLACK GOLD
是更高档的SHAFT.当时就随便放了一个BID,结果没人跟我抢,$150就拿下了. 寄到手一
看,第一感觉是怎么这么粗啊?比DG粗不少. 除此以外没啥特别的,但到RANGE上一试感觉
还不错,软硬适中,基本距离没变7 IRON还是165左右,但球道明显直了很多,DISPERSION
PATTERN 非常TIGHT. HOOK没有了,而且感觉特别SMOOTH. 到现在用这套杆打了两个
ROUND的了,越用越喜欢. 看来好的SHAFT还真不是呼油出来第. ... 阅读全帖 |
|
ET
发帖数: 10701 | 7 So, so far my conclusion about my approach to measure club speed is off
about 5-8mph, compared to Golf Smith 's laser detector.
So what's the off from?
Like I said yesterday, I doubt the off could be from golf shaft. In my
model, the golf shaft is considered to be made of "ideal material" which
never bent and torqued.
In reality, we know the golf shaft does bend (flex).
So I found this article, http://www.tutelman.com/golf/shafts/ShaftLab3.php,
(if you don't want to go through , just look for t... 阅读全帖 |
|
p****4
发帖数: 517 | 8 Happy New Year, Everyone.
跟风写写2012的最后一场球.
Last Friday morning, walked El Dorado golf course with bag on my shoulders.
Finally I reached the goal I set for 2012 - walk a full-length course
carrying my bag. During the year, I walked quite a few rounds but all on the
shorter courses (Fullerton and Dad Miller). I played from blue tee with
three guys riding the golf carts. They offered to give me a ride after the
third, which I turned down.
Played from blue tee (~6400 yards), I got 94 with 32 puts. T... 阅读全帖 |
|
h****y
发帖数: 9234 | 9 按钮和摇杆全部换成sanwa的了.
配色想的是红白搭配,弄成厂队的效果的,
还手动把红和和白的的键帽拆下来然后互换,结果发现效果一般,但懒得再折腾换回去了
lizardlick的摇杆直接送了shaft的套子,还送了2个dust cover,反正都一块放上去了
.
shaft不裸了之后看着确实好多了.
最后很2 的是我把盒子装好了回来拧 小球,才发现shaft有套子了,没法固定shaft(本来
是想用钳子夹住然后拧球的). 后来又后盒子拆开固定shaft把球拧上去...
摇杆和按钮的手感对比了一下,还是区别挺明显的. 另外不知道它的这个square restri
ctor是不是为搓招有特别的设计, 左下和右下的角好像圆滑一些,比较容易摇 ,而左上右
上2个角感觉似乎角更深一些.也可能是错觉...
为考试周拼命ing.干看着却没法痛快玩....
上图.. |
|
发帖数: 1 | 10 VTOL项目总师Kevin Renshaw； F35垂直起降技术（3BSD）来源于通用的Model 200，与
雅克141无关
F-35B Lightning II Three-Bearing Swivel Nozzle
By Kevin Renshaw Posted 12 August 2014
The Convair Model 200 was proposed in June 1972 to respond to the US Navy
request for designs for a fighter/attack aircraft for the sea control ships.
The VTOL aircraft would have used a PW401 engine with an afterburning 3BSD
plus twin Allison XJ99 lift engines located behind the cockpit for added
vertical lift forward of the center of gravity to b... 阅读全帖 |
|
s****c
发帖数: 13 | 11 在车版学了不少东西了, 现在也贴一篇我自己的修车经验, 算我对这个
版的一点小贡献吧. :)
首先给那些新手们科普一下基本知识—什么是CV joint和CV boot,对于
前驱的车来说, 发动机要把其动力传给前轮是通过一个轴来完成的,这个
轴叫 driveaxle 或 CV shaft, 左右各一根. CV shaft 一头接transmission,
一头接轮子, 把transmission里的动力传输到轮子上,这个传输过程并不
像说起来的那么简单, 有很多特殊的要求, 比如要求在车的不同载重(即
轮子在不同高度)的情况, 以及运行时震动的情况下仍然能够正常传输动
力,更重要的是,前轮负责车的转向, 所以就要求CV shaft在车转向时能够
正常传输动力. 显然, 由于有这些要求, CV shaft与轮子的连接处不可能
使用齿轮这样的硬连接, 而必须用一个类似万向结的东西, 这就是所谓的
CV joint. 由于CV joint精密而容易受损, 所以外面专门有一个圆锥状的
橡胶外套来保护它, 这就是CV boot. 其作用是防止外界的异物进入CV
joint, 并保护CV join |
|
a****8
发帖数: 2771 | 12 The Acceleration Device allows the rear wheels to be variably overdriven
with respect to the speed of the front wheels up to 5.7%.[16][26][27] The
Acceleration Device in the Acura RL is positioned in front of the rear
differential. During normal steady state driving, the Acceleration Device
input shaft (from the engine) and output shaft (to the rear differential)
spin at almost equal speeds. In a cornering situation, the output shaft
spins up to 5.7% faster than the input shaft, effectively spee... 阅读全帖 |
|
l*********u
发帖数: 19053 | 13 MDX
POWER TRAIN:AUTOMATIC TRANSMISSION
Recall number: 13V571000
Recall date: 11/14/2013
Problem Summary:
AMERICAN HONDA MOTOR CO., INC. (HONDA) IS RECALLING CERTAIN MODEL YEAR 2014
ACURA MDX AWD VEHICLES MANUFACTURED MAY 6, 2013, THROUGH OCTOBER 14, 2013.
THE BOLTS THAT ATTACH THE DRIVE SHAFT TO THE AUTOMATIC TRANSMISSION TRANSFER
ASSEMBLY MAY NOT HAVE BEEN PROPERLY TIGHTENED. AS A RESULT, THE BOLTS COULD
LOOSEN POSSIBLY ALLOWING THE SHAFT TO DETACH.
Consequence:
IF THE DRIVE SHAFT DETACHES WHIL... 阅读全帖 |
|
c******i
发帖数: 4091 | 14 发信人: chichazi (吃叉子), 信区: NextGeneration
标 题: 包皮到底有什么用？
发信站: BBS 未名空间站 (Fri Mar 21 14:25:55 2014, 美东)
The foreskin has numerous protective, sensory, and sexual functions.
· Protection: Just as the eyelids protect the eyes, the foreskin
protectsthe glans and keeps its surface soft, moist, and sensitive. It also
maintains optimal warmth, pH balance, and cleanliness. The glans itself
contains no sebaceous glands-glands that produce the sebum, or oil, that
moisturizes our skin.11 The foreskin produc... 阅读全帖 |
|
c******i
发帖数: 4091 | 15 The foreskin has numerous protective, sensory, and sexual functions.
· Protection: Just as the eyelids protect the eyes, the foreskin protects
the glans and keeps its surface soft, moist, and sensitive. It also
maintains optimal warmth, pH balance, and cleanliness. The glans itself
contains no sebaceous glands-glands that produce the sebum, or oil, that
moisturizes our skin.11 The foreskin produces the sebum that maintains
proper health of the surface of the glans.
· Immunological Defense: The m... 阅读全帖 |
|
l**********n
发帖数: 39 | 16 Please call 415-497-3160, if you are interested.
Wilson K-Factor K-Brave 2009 Badminton Racket
Nanotechnology ;It is like new and barely used , regular price $120.00 , Now
is
only $60.00 (string is included)
K]EY FEATURES
1. [K]arophite Black - New structures created at the nano level for more
feel and
ultimate [k]ontrol.
2. [K]ontour Joint - New frame and shaft technology that enhances stiffness
at t-
joint area for improve torsional stability.
3. [K]onstruction - New frame construction provide... 阅读全帖 |
|
i***d
发帖数: 878 | 17 景色一般，号称有个Million Dollar View，这都其次了。主要这次还算开季活动，路
线很平缓，散步一样，非常适合大家聚在一起走走聊聊。感兴趣的都欢迎来，可能老人
孩子家庭单身都有。
集合时间周六12点，12点半出发；周日等带队人确定。
集合地点就定在这张地图前面：
路线参照这个，走完全程大概2小时就够。
http://www.pnwhikes.com/hike.asp?hid=Anti-Aircraft+Peak++(Couga
Anti-Aircraft Peak is a relatively level, trouble-free hike through Cougar
Mountain Regional Wildland Park. Not long ago, this peak was an active Nike
Missile Launch Site to be used in case of invasion (thankfully it wasn't
needed.) Mine shafts, roads and cables lying within t... 阅读全帖 |
|
l**********n
发帖数: 39 | 18 【 以下文字转载自 NewYork 讨论区 】
发信人: lavamountain (LAVA), 信区: NewYork
标 题: 羽毛球拍for sale
发信站: BBS 未名空间站 (Sat Mar 12 22:01:48 2011, 美东)
Please call 415-497-3160, if you are interested. The racket is in New York.
Wilson K-Factor K-Brave 2009 Badminton Racket
Nanotechnology ;It is like new and barely used , regular price $120.00 , Now
is
only $60.00 (string is included)
K]EY FEATURES
1. [K]arophite Black - New structures created at the nano level for more
feel and
ultimate [k]ontrol.
2. [K]ontour Joint - N... 阅读全帖 |
|
s******r
发帖数: 9338 | 19 SP4RJ Sneaky Pete, Stainless Joint, Z2 shaft $449 $314.30
SP4RJL Sneaky Pete, Stainless Joint, 314-2 shaft Linen Wrap $342.30
BK2LW BK2 break cue with linen wrap, 314-2 BK2 shaft. $364.65
joint protector *3 $12.25*3
Model # C3SP4x8 Sport soft case, 4 butts 8 shafts Price: $109.65
total: 314.3+342.3+364.65+12.25*3+109.65=1167.65
shipping: 18
tax: no
extra discount 60$
Final price = 1167.65+18-60=1125.65 |
|
F**y
发帖数: 322 | 20 YY，你又来BSO了～我前一阵想work out的，work了几天结果周日的一场9球打得奇烂无
比，出杆毫无感觉可言，几乎无法控制母球！遂作罢！
像你现在都能卧推160lbs了，搞个重的应该挺趁手。我一直都选轻的break cue和
playing cue。
我个人偏爱wrapless，干净，好打理，摩擦力比任何wrap都大（可能某些稀有动物的真
皮除外）。P3的playability跟P2比差不少，所以说overprice了。其实还是那句话，球
杆的好坏全看你个人的感觉和喜好。建议YY多去找人借杆子试试，predator，schon，
mezz，Tiger，OB，custom……挑个喜欢的型号吧。
我说的那个Seyberts buck就是Seybert网站上的购物卷咯。你买那个BJ cue的话，会得
到23块钱的站内消费credit。假如，你加一个4×8的soft case到shopping cart里面，
你只要多花56-23=33的价格就能买下BJ cue和case了。
JJ cue是可以email讲价的，通常能比网站价格低一些，顺便搞个free shipping和free
jo... 阅读全帖 |
|
W*******s
发帖数: 18705 | 21 我傻B了一回，在清Worm Shaft（Worm Gear）的时候没有拆开，（C-Clip很难拆装，一
弹就没有了。）我用酒精细布条清理，手柄一转，卡里面了，再一用力，把Worm Shaft
刨掉一层皮，再转Line Guide就不动了。册那，这个轮子是日本版的Liberto Pixy小轮
，我到哪里去搞Parts，真有眼睛一黑的感觉。还好冷静下来之后，蓦然发现，Daiwa
TDZ的Worm Shaft是一样的东西，只不过Pixy多了个可拆卸的塑料套环。为了肯定一下
，把二条Worm Shaft放一起对比，果然一样！打电话去Daiwa买了TDZ的Parts，连运费
22刀。 |
|
s*******w
发帖数: 210 | 22 Soundview's bag:
Cleveland 460 Comp 9.5 degree driver with Aldila Stiff Shaft
Taylormade V-Steel T/S 3 Wood with Stiff Steel Shaft
Taylormade Rescue 2 (19 degree) with Stiff Steel Shaft
Taylormade Rac LT 3-P Irons with Stiff Steel Shafts
Taylormade Rac 52 degree Wedge (low bounce)
Callaway 58 degreed Wedge (low bounce)
Odessey 2-ball blade putter (black)
these are the fourth set of clubs i've had over the last 10 years. i am happy
with all the woods, wedges and putter. next iron set will be the |
|
t*****n
发帖数: 467 | 23 seems like a good deal to me. well, depends on the condition. But just one year useage should be fine if not abused. Check whether there some paint loss on the top of those drivers.
What kind of shafts and shaft flex in those iron and drivers? Shafts are very
important too. but anyway, even stock shafts would make this a very good
deal.
They are not for beginners especially iron and titleist driver. But I always like to buy a little bit advanced clubs to give myself some room to improve.
BTW: Wh |
|
ET
发帖数: 10701 | 24 先回答问题：
1)graphite / steel shaft 主要是由swing speed确定， 看在大多数年龄低于40岁的
人都在用steel shaft的份上，可能还是steel shaft好些。
2）ping是第一家有"fitting system”的制造商，它家的black dot, white dot, blue
dot 是所谓的lie angel不同，black dot是他家的standard尺寸，适合在1.80 +/-
2cm
ping i5我非常非常推崇， 但它依然适合在10-12 handicap之内的，否则的话可能g5更
适合些。
我个人的感觉是这些制造商的技术都有自己的侧重点， ping的铁杆的standard model
都能比其它各家 “大”些，比如shaft的长度， lie angel, 也许还有offset， 它家
的球具更适合老美，或者说站的姿势比较高的。
3）我认为现在我的水平的确能区分些球具的制造技术，用我对挥杆的理解来分析他们
的设计是否合理。但就如我说的，如果不同的人对挥杆动作有不同的理解，那么他对球
杆头的设计也必然不同，所以，没有定论。 |
|
ET
发帖数: 10701 | 25 用了这个cobra mspeed offset近8个月了，从最初的10.5度+55 gram shaft， 到现在
的9度， 65 gram still shaft, 到现在的taylormade r5 dual 9.5* + 55 gram shaft.
对cobra的这个offset driver， 刚开始时都能击得很远，比如第一个10.5度的，可能
连滚带爬近280码，后来是越打越短，越打越短，也就将降240码，而且球是越击越高；
后来换成9度，换了shaft， 刚开始感觉也超好，carry distance都有265-270码，到现
在又变得越打越短，255码左右。我的搭档scotty，以前他最好的开球也就超过我近10
码，现在变成近40码 （他开球变得比以前好了也是，就这2天。）后来我换回
taylormade r5，我这个周末到现在在尝试的，他和我的距离又回到近10码左右的差别。
我个人认为一个是我的swing speed的变化，另外一个原因是offset club head（
driver/fairway woods），要么是材料的原因，接触球时形变导致球飞出的速度受影响 |
|
ET
发帖数: 10701 | 26 all stiff..
but adilva's stiffness could be different from USTA's
Adilva is a good shaft maker . i use its shaft for my driver/woods.
for the 1st cobra 10.5 degree, i know it's shaft which makes the distance
difference. for the 2nd 9 degree cobra, it might not be the shaft. but just
don't know..
the degree? it depends for amaturers. at least, we can judge from the ball
trajectory. what I found for my 9 degree is.. i am still hit the ball sky
high, even i just tee it off a bit higher than the gro |
|
ET
发帖数: 10701 | 27 that's right. either you said his arms straigth with the shaft, or I say it
the shaft and two arms are at the same plane all the time.
grips? which hand? it's supposed to be "just right at the finger bottom for
the left hand" for the shaft, and across the right hand palm for the shaft.
there are not too much for fingers.
with
with |
|
p******g
发帖数: 321 | 28 If you do it as you said. Your left hand would hold the shaft mainly with
your fingers, or more fingers than palm. Your fingers wrap around the shaft,
your palm contacts the shaft with only a small area.
It sounds to me you are using a neutral left hand grip combined with a
strong right hand grip. If it is true, you probably have a tendency to draw
the ball
it
for
shaft. |
|
f*****t
发帖数: 4395 | 29 今天去给推杆改长度，裁断3/4寸，顺带换新握把，殊不知我杆子的shaft band贴的比
较靠上，结果换完握把，裁完shaft以后 ,shaft band有一半被新grip盖住了.
现在shaft band露出一半，揭也揭不下来，想换新的都不行啊，郁闷.
大家以后小心 |
|
i****e
发帖数: 913 | 30 L5V should be ok, too new for Chinese to copy.
Have you decided your head and shaft combination yet?
I was looking at L4V before, but I can't stand for the 50g Red Board shaft
that they offered on F models, too light for me. And their X model which
DOES have 60g Blue Board shaft, only comes with 8.5 degree head. And looks
like they continued doing this for L5V this year. :(
So eventually with 35% Live discount, I bought a TM Burner Tour TP 10.5",
63gram White Board shaft, and so far it works. (w |
|
t****i
发帖数: 904 | 31 没有过ebay，看到这个更不会用了。club里的pro shop其实什么都有，而且service极
好，可以随便demo，我买driver那一阵子把所有的新型号都试过了，而且同一个型号的
各个牌子的shaft也都试了。虽然不降价，但也物有所值。
提醒大家一句，买driver的话基本上不要用原厂的shaft，很多牌子都允许你选择像
aldila之类的shaft，比原厂的shaft要好很多。比较喜欢的牌子有aldila和fujikura.
one |
|
v***s
发帖数: 4031 | 32 Go with your feelings and get them, but I know from my experience, an Aldila
shaft will take time to get accustomized to it. I bought a Cleveland HiBore
XLS Driver with the regular gold shaft in the May and took no time to get
used of it, and then I bought a Nike SQ Sumo 2 5900 Driver with an Aldila VS
Proto Shaft this month. It took me a while to get with it. I really like it
and the Aldila Shaft's reduced my slice shots but kept the distances I want
to.
Anyway, I can't generate a club head spe |
|
b*******e
发帖数: 724 | 33 Take a look at hte following article. Too stiff a shaft will cause shorter
ball flight and slice.
http://golf.about.com/cs/tipslessons/a/shaftflex.htm
If Your Flex Is Too Stiff
What effect does a too-stiff shaft have on your golf game?
1. The ball will probably fly lower and shorter for any given loft, compared
to a properly fit shaft.
2. The ball may tend to go to the right, or fade side, for right-handed
golfers because with a too-stiff shaft the clubface is harder to square (the
clubface is m |
|
t*******5
发帖数: 300 | 34 driver要买新的 or demo
wedge要买新的 or demo
putter基本ok，你看着样子不错就可以了。基本损耗最小的。
wedge driver哪怕是新的，过两三年，你自己也会换。因为肯定会打坏
driver买大牌的，2年打坏去换个新的，然后自己reshaft，stock shaft一般都不靠谱。
最重要的不是杆头，是shaft
wedge，putter除外
普通打，不用担心iron，打断iron前，你自己的手腕先挂了
要是怕driver，买个那个胶带纸一样的东西，贴在上面。就不用担心打花杆头
一般打断shaft很正常，shaft时间长了就会断。自然磨损
去店里reshaft or 找customer service |
|
ET
发帖数: 10701 | 35 有这些东西要卖：
ping i5 2-iron
ping s59 2-iron
$10/each + $12 shipping
这些都是excellent condidiont. 买来新的，练习带场地不过10次。
wedges:
cleveland cg10 51 degree and 49 degree
这可是cover你pitching wedge和56度之间的利器。
good conditions.
$15/each + $12 shipping
hybrid
taylormade tour 2-iron 15 degree, stock stiff
taylormade tour 3-hybrid , stock standard shaft
$20/each + $12 shipping
还有titleist pro v1 golf balls 4 boxes, 2009 model (改进后的）
$40/boxes
还有4根shaft, 分别是从3/5/7 fairway woods上下来的adivla 50g shaft.
换球杆不如换shaft呀。
另外一个是drive |
|
v*****r
发帖数: 2325 | 36 把burner rescue 08退了，换成 adams insight tech a4 hybrid FW 3+ (matrix ozik
shaft), 结果REFUND 还有剩余， 就弄了一个$33 cobra baffler (adilda nvs shaft
, 3r, 20 DEGREE)
去range 一试用， BAFFER KILLS, EASY TO HIT, HIGH TRAJECTORY, GOOD DISTANCE.
HITTING LIKE A IRON.
后来一查， BAFFLER 其实是HYBRID UTILITY 的先驱。。。 果然好用。。。 MY
DRIVER SHAFT IS ADILDA, MAYBE I AM USED TO THE SHAFT.
A4 3wood disappoints. not nearly as good as my SPEEDLINE 5wood. MAYBE IT
IS STRONG 3WOOD, OR I AM NOT USED TO MATRIX OZIK... |
|
v*****r
发帖数: 2325 | 37 titlist did emphasize that D3 use voodoo shaft like after market.
most other manufacturer usually say the shaft were made for them by Adilda,
so i guess Adams get wholesale price on voodoo shafts, so they can afford to
provide at a lower price.
have you ever tried on range with true voodoo vs other shaft? how much is
the difference in terms of distance and ball flight?
i never saw a new club with voodoo offered less than $100 before.
but the store said they will get one from adams, and call m |
|
v*****r
发帖数: 2325 | 38 shaft stiffness 可能对于pro 追求高精度。
我实验过 regular - x stiff, 觉得距离和dispersion 差不多。
regular 往往手感跟好。当然我只试过adilda.
我现在的driver adilda regular shaft, 在range 和Launch monitor 最好的时候都有
打出过 290-300yard 的. 跟那些demo 的最新club stiff shaft 比， 没觉得shaft
stiffness 的差异影响准确度多少。
总计stiff regular xstiff 的选择影响远比一个mid-high handicapper 的动作不稳定
性造成的影响小。 |
|
v*****r
发帖数: 2325 | 39 shaft stiffness 可能对于pro 追求高精度。
我实验过 regular - x stiff, 觉得距离和dispersion 差不多。
regular 往往手感跟好。当然我只试过adilda.
我现在的driver adilda regular shaft, 在range 和Launch monitor 最好的时候都有
打出过 290-300yard 的. 跟那些demo 的最新club stiff shaft 比， 没觉得shaft
stiffness 的差异影响准确度多少。
总计stiff regular xstiff 的选择影响远比一个mid-high handicapper 的动作不稳定
性造成的影响小。 |
|
c**********e
发帖数: 276 | 40 I am susceptible to the trigger finger problem. I have to make certain
gripping adjustments. Here are the ways I used. In case anyone of you has
the same issue, I hope some of the information can be helpful.
(1) Use 10-finger gripping method (baseball grip method);
(2) For left hand, use palm to grip the club (yes, the club is gripped in
my left hand palm area!!) & standard right hand gripping;
(3) Use a mechanic glove with palm padding, or an anti-vibration glove
for my left hand;
... 阅读全帖 |
|
c**********e
发帖数: 276 | 41 A few weeks ago, after having played my first-set (practically) of irons (
MIZUNO MX 200) for one year, I decided to have a new set of irons in my bag.
Though MX200 is a good set of irons, and they work for me well. They
have the graphite shafts. I am trying to use long irons, but they feel a
little light. In addition, I would like to have a little more playability
for draw and fade. I wanted to test how steel shafts will work for me, and
develop a passion for new tools. My eyes were on ... 阅读全帖 |
|
q***q
发帖数: 3356 | 42 我同意你的大多观点（剩下的不明白）。不过我还是要为器材派稍微辩解一下。:)
我自己用3i练铁杆的动作。我有三根3i，主要的区别是shaft。Titleist ZM+DG S300，
Mizuno MP33+project X 5.5，Mizuno MP32+DG X100。按网上发烧友给的数据，这三根
shaft的FCM分别是5.75，6.0，和6.75。当然数越大越硬了。
http://www.golfwrx.com/forums/topic/496072-new-and-improved-sha
我的体会是这个FCM的值是基本正确的。ZM好像平均距离最远，大概160码，但是比MP33
远不了多少。MP32的平均距离大概是150码。MP33的手感最好。
如果有projectX 5.0（FCM=5.5）shaft的3i blade我还是可能会买一个试试，不过S300
好像就可以了，又比较常见。
所以我觉得买器材应该是有目的的买，目的是通过比较找到自己合适的shaft和喜欢的
手感。
back |
|
A*f
发帖数: 3067 | 43 Interesting.
I used DG S300 too.
Never check my 4 iron shaft.
Have you found new shaft or better shaft that make your 3/4 iron hit longer?
Since my 4 iron is just as far a my 5. I stop using 4.
I think 4 iron is too demanding for me. And I rarely need it on course
anyway.
If you find the right shaft for your 3/4, that would be a great step forward
. |
|
b*******2
发帖数: 412 | 44 铁杆的FITTING主要是看杆身长度，LIE ANGLE，FLEX，还有总体重量和挥重等。我挥杆
相对比较FLAT，所以LIE ANGLE比一般要平2-3度，这个LIE ANGLE一定要看动态的，而
不是站在那里量下身高和手腕到地面的距离就决定了的。杆身的总体重量和挥杆也很重
要，现在的铁杆一般是D0-D1的挥重，我自己更适合D3的。
比较TITLEIST AP2, CALLAWAY APEX， TAYLORMADE CB, MIZUNO MP-H4和不同SHAFT，我
更适合MIZUNO MP-H4， SHAFT是KBS tour C-TAPER LITE STIFF
参数以6号铁为例，实际LOFT是31度，长度是37in, lie angle 60 deg.挥重D3. KBS C-
TAPER LITE SHAFT比较适合我，手感很好，感觉可以用力而不失去控制，非常稳定。
TRACKMAN的参数：launch angle 19 deg, spin 4800 rpm, carry avg. 175 yd， 弹道
中高。H4的LOFT不算很STRONG。但手感挺好的。
WEDGE的FI... 阅读全帖 |
|
b*******2
发帖数: 412 | 45 DRIVER是很TRICKY的东西，杆头和杆身都对距离和准确度有影响，杆头的重心分布，比
如前后，高低，左右，都可以对LAUNCH ANGLE，back spin和DRAW/FADE有影响，这也是
最近一两年很多DRIVER做手脚的地方。杆身也重要，不同重量，硬度，KICK POINT位置
，直接影响手感和球性。
没有那个厂家的东西是“最好”的，这是个很主观的感觉，每个人的杆头和杆身的最优
组合可能都不一样。所以最好去CUSTOM FIT一下，但一般GOLF SMITH/GALAXY里面，就
让你在STOCK SHAFT里面选，没什么机会试OEM的杆身，很多时候，差别会很大，OEM的
杆身要贵不少，但手感和性能要强很多，比如TAYLORMADE的DRIVER上的STOCK SHAFT是
FUJIKURA的，这个杆身其实要300美元，而TAYLORMADE的STOCK SHAFT的成本才20美元，
一样的喷涂，但手感和稳定性差太多。
也许有人会说，我打的一样远，没区别。但问题是，稳定性，您可能10个球里有一两个
打的很棒，然后就觉得这球杆其实不错，只是自己挥杆不好或不稳而已，但换个SHA... 阅读全帖 |
|
H********s
发帖数: 1024 | 46 打开箱盖检查，原来是联节motor shaft和扫描assembly的stepping shaft中间的
plastic shaft coupling裂断了。马达转，想带动扫描头，但是因为shaft coupling断
了传不到扫描头上去，扫描头不动，自动检测失败。明天打个电话到N的parts部门定一
个，应该是几块钱的东西了。 |
|
g****r
发帖数: 636 | 47 厄……
入档以后踩着离合而不是double clutch的话
layshaft的转速还在上一档的转速上，直接踩这离合的话这个shaft的转速是没有跟发
动机或者output shaft同步的
踩离合以后其实有三个转速，发动机转速，layshaft速度和output shaft速度
发动机转速看转速表，output shaft转速跟速度走，layshaft的转速直接看的话看不出来 |
|
w*******y
发帖数: 60932 | 48 Link:
http://www.taylormadegolf.com/pro...ree_5_Iron
GIVE-AWAY PRIZES/SELECTION CRITERIA: To become a Qualified Entrant you must
provide the following responses to the registration questions with your
registration:
Entrants with 5-20 handicaps
Entrants who currently play TaylorMade, Callaway, Cobra, Cleveland, Titleist
, Ping, Adams, Mizuno, or Nike irons
Entrants who have owned their current irons more than 6 months and less than
5 years
Entrants who play two or more times per month
Entrants wh... 阅读全帖 |
|
m**********n
发帖数: 27535 | 49 BEIJING – China joined the world in breathless coverage of the Chilean mine
rescue, but when a gas blast killed 21 Chinese miners and trapped 16
Saturday, the national TV evening news didn't say a word. Rescuers said they
were fighting tons of coal dust to reach the miners, who have been located
but whose condition was unknown.
The rescuers also faced dangerous gas levels and the risk of falling rocks
as they worked their way into the mine pit.
The early-morning explosion in central China happen... 阅读全帖 |
|
i*****s
发帖数: 4596 | 50 Forensic Toxicology
BY Katherine Ramsland
share
Comments
Heavy Metal
Robert Curley, 32, began to grow ill in August 1991, entering the hospital
in Wilkes-Barre, Pennsylvania, for what would become a series of stays
before he finally died in September. His doctors went through several
diagnoses for his puzzling symptoms, which included burning skin, numbness,
weakness, repeated vomiting and rapid hair loss. Just before he died, he
became more agitated and aggressive, so he was transferred to a... 阅读全帖 |
|
