w*****r
发帖数: 348 | 1 老板说要我自己拿主意选一个方向的research topic，我本身一直在和FPGA打交道，而
老板则是做LOWER POWER的，想请问大家，有没有什么比较好的research topic吗？最
好与这两者之一相关的，FPGA的lower power design怎么样，有人做这个吗？或者是
reconfigurable computing? 因为我将来想进industry，所以想选一个比较能找到工作
的research topic，请大家推荐一些，先在这里谢过了! |
|
m**********s
发帖数: 754 | 2 5）取下后lower mount内侧heat shield的两个12mm 螺丝；
6）用grip plier辅助取下后lower mount的15mm 螺栓；
7）钻出车下，从前部取下mount横梁头上两个17mm 螺丝。然后稍微左右转一下横梁就
会掉下来了。最好车底垫上垫子。如果臂力超强就算了，呵呵。 |
|
m**********s
发帖数: 754 | 3 VOLVO总共有四个Mortor Mount。光换lower mounts不需要支撑。回头换上Mount的时候
下面就需要支撑。我准备撑在油盘和tranny/engine结合部两个地方。千斤加2x4来撑，
免得把油盘给顶爆了。
发信人: michael8238 (michael8238), 信区: AutoFans
标 题: Re: DIY：VOLVO S40 Lower Engine Mounts 更换
发信站: BBS 未名空间站 (Mon Mar 2 16:22:28 2009)
都不需要单独撑住tranny的嘛? |
|
r**********e
发帖数: 2821 | 4 ebay 看看，俺曾在搞过一套audi的front suspension kit，包括前悬挂的lower，up
control arms, tie rod end,一共10件，两百多刀，德国产的，换上了lower control
arms，噪音马上消失了，剩余零件还在睡觉。 |
|
n*********o
发帖数: 315 | 5 ECStuning.com 买的，牌子是Meyle．价格不错，大概1４０刀一个．换了后感觉好多了．
发现三年前换的Powerflex control arm bushing坏了，在www.autohausaz.com买了
Meyle heavy duty. 下星期换．
Rear Trailing arm bushing也不行了，在www.getbmwparts.com买了OEM M3的．同时又
在vorshlag.com买了limiter. 下周开工．
总结一下我修过的E46常见病：
lower control arm bushings
thermostat
coolant expansion tank
PCV valve
valve cover gasket
Vanos seals
lower control arm
intake tube
power window
oil filter housing gasket |
|
w*******y
发帖数: 60932 | 6 Aimsurplus:
http://www.aimsurplus.com
has a great deal on a Surplus Arms & Ammo LOW15 Stripped AR Lower Receiver
- $59.95. This is an awesome deal for those you who are building on the AR
platform.
Requires FFL for transfer.
Not for sale in California.
Here is the description from the site:
quote
Advanced aerospace manufacturing technology was utilized to produce the
industries finest, forged Mil-Spec lowers. These receivers are machined on
automated, cellular manufacturing system to produce a |
|
w*******y
发帖数: 60932 | 7 AIMSurplus has the Spike's Tactical AR15 Lower Receiver:
http://www.aimsurplus.com/product.aspx?item=F1STSL&groupid=214
for $79.95
FREE SHIPPING!* *48 States, this item only. Not for sale to CA.
Spike's Tactical Multi-Caliber Stripped lower receiver for AR type Rifles.
This is the basis for any top quality rifle. Machined from a 7075 T6 Mil-
Spec Forging. Mil-Spec Type III Hardcoat Anodized finish with Black Teflon
coating. Low Shelf for use with RDIAS.
|
|
|
w*******y
发帖数: 60932 | 9 I'm not sure how long this will last, but Palmetto has stripped lowers for
49.95 + 7.00 shipping. Shipping charge applies to each one ordered.
In case you have never ordered a firearm online, this has to go to an FFL
and you will need to pay a transfer fee. But this is one of the best deals
I have ever seen on these.
From the site:
"These forged lowers are quality made using material is 7075-T6 and are
marked "CAL MULTI" to accommodate most builds. Finish is Black Hardcoat
Anodize per MIL-8... 阅读全帖 |
|
w*******y
发帖数: 60932 | 10 Linky:
http://cgi.ebay.com/Samsung-PN51D6500-51"-3D-1080p-HDTV/29
#ht_4866wt_921" rel="nofollow" target="_blank" onclick="_gaq.push(['_
trackEvent', 'thread', 'click', '4076534 - lower-price-ebay-daily-deal-
samsung-pn51d6500-51-inch-3d-1080p-600hz-plasma-hdtv-789.99-free-shipping'])
;">Linky [Linky:
http://cgi.ebay.com/Samsung-PN51D6500-51"-3D-1080p-HDTV/29
#ht_4866wt_921" rel="nofollow" target="_blank" onclick="_gaq.push(['_
trackEvent', 'thread', 'click', '4076534 - lower-price-ebay-daily-dea... 阅读全帖 |
|
G*******s
发帖数: 10605 | 11 【 以下文字转载自 SmartShopper 俱乐部 】
发信人: GoRockets (火箭加油), 信区: SmartShopper
标 题: Asus 15.6" Laptop $230 or Lower
发信站: BBS 未名空间站 (Sun Nov 9 11:38:22 2014, 美东)
Best Buy has Asus - 15.6" Laptop - Intel Celeron - 4GB Memory - 500GB Hard
Drive - Black On Sale for $229.99 with Free Shipping. Staples has it On Sale
for $249.99. Take the ads from BestBuy (or show them the webpage) to
pricematch at Staples and you will get an even lower price. Good luck.
http://userquote.com/forum/index.php?topic=2592.msg3711... 阅读全帖 |
|
X*****s
发帖数: 2767 | 12 【 以下文字转载自 HardTimeCall 俱乐部 】
发信人: XXLBass (大巴司机), 信区: HardTimeCall
标 题: What Happens When Bond Yields Are Lower Than the Inflation Rate?
发信站: BBS 未名空间站 (Sun Jul 8 23:30:01 2012, 美东)
By James Debevec Jul 06, 2012 11:45 am
Bond yields predict disinflation.
MINYANVILLE ORIGINAL Not long ago bond yields were lower than the inflation
rate. There were a number of articles commenting on the phenomenon. A common
piece of advice in many of these articles was to invest in commodities. The
basic logic wa... 阅读全帖 |
|
c**i
发帖数: 6973 | 13 "over the next few years."
Michael Pettis, China's Economy IS Headed for a Slowdown; Beijing's export-
oriented strategy can't continue forever. Wall Street Journal, Aug 10, 2011.
http://online.wsj.com/article/SB1000142405
3111904140604576498353661884930.html
Quote: "Still, consider the price of delaying this reversal. Even if
consumption manage to keep growing at the same rate it has during the past
decade, when Chinese and global conditions were buoyant and debt levels much
lower, China's grow... 阅读全帖 |
|
z****n
发帖数: 5870 | 14 参考CNN的翻译，
更新一下
National mourning days 全国哀悼日
National flag lowered to half-staff 降半旗 |
|
N******K
发帖数: 10202 | 15 lower bound 只可能变的更低 你数学咋学的？ |
|
l******r
发帖数: 18699 | 16 目前外f的infimum还没有找到，可以算是个open problem。人们不断发现的是被改进的
lower bound而已 |
|
d**z
发帖数: 3577 | 17 Is "Hand-Made" Data Better?
After China’s official Gini coefficient reached 0.412 in 2000, its National
Bureau of Statistics (NBS) stopped releasing the data, saying “income data
for wealthy households was incomplete.”
But a couple of months after a Chinese university reported China’s Gini
coefficient reached 0.61 in 2012, the NBS started releasing the coefficients
again.
According to the NBS chief, “China’s Gini coefficient stood at 0.474 in
2012, down from a peak of 0.491 in 2008.” That’s slig... 阅读全帖 |
|
c********e
发帖数: 4283 | 18 substantially lower than expected 190000
also October's job number was revised down from 250000 to 237000
MAGA! |
|
|
发帖数: 1 | 20 【 以下文字转载自 USANews 讨论区 】
发信人: ThinkHarder (ThinkHarder), 信区: USANews
标 题: President Trump:"Very happy Fed lower interest rate to ~0!“
发信站: BBS 未名空间站 (Sun Mar 15 22:47:49 2020, 美东) |
|
y****t
发帖数: 10233 | 21 so the middle class should get lower tax.
not to tax more to the rich.
本版的loser们。你们已经给政府操的变态了。 |
|
l****z
发帖数: 29846 | 22 Hilarious: Obama Lowers Debate Expectations ‘Because of the Demands of His
Office’
by Jammie
I could see this as being plausible if the guy ever actually worked.
Seriously, the guy has been in campaign mode for three years, has time to
chat with the washed-up Letterman, the idiots from The View, talk football,
basketball, play golf, and hang out with Jay-Z and Beyonce, among assorted
other celebutards. So, um, when does he actually work?
Now we’re to believe he’s too busy to prepare for debates?... 阅读全帖 |
|
j****r
发帖数: 192 | 23 Can they go any lower? Virginity, brain washing, foul-mouthed seniors.... Is
this the America we came for? |
|
y**********a
发帖数: 824 | 24 http://www.foxnews.com/politics/2013/03/09/colorado-immigrant-t
The cheers of immigrant students echoed through the Colorado Capitol on
Friday after the House passed a bill allowing students who entered the U.S.
illegally to pay lower college tuition, a measure that will soon become law.
Students hugged and wiped away tears outside the House chamber after the
vote, sending the proposal to Democratic Gov. John Hickenlooper, who is
expected to sign it sometime this month.
The historic vote comes a... 阅读全帖 |
|
|
发帖数: 1 | 26 他其实是想说 lower premier for 黑兄弟.
black sisters反正有政府包， 黑兄弟们本来没有医保，现在有了政府出钱的
obamacare. |
|
h*******n
发帖数: 8906 | 27 黑兄弟现在医保本来就不要钱吧 想不出领食品券的政府好强制要丫掏钱买保险
: 他其实是想说 lower premier for 黑兄弟.
: black sisters反正有政府包， 黑兄弟们本来没有医保，现在有了政府出钱的
: obamacare.
|
|
s****7
发帖数: 2507 | 28 Lower Capital Gains Tax
Under the plan, the top federal capital gains rate is cut from 23.8 percent
to 20 percent. This is achieved by eliminating a 3.8 percent tax that is
used to fund the Affordable Care Act. The reduction is meant to create
greater incentives for people to invest. |
|
m*****y
发帖数: 7 | 29 昨天发了帖子，CV轴无论如何下不来。
今天上午雨夹雪，没法弄。
下午居然停了，也不是很冷，室友建议开工。
开始仍然撬不出来CV轴，主要还是不好用力。
后来就我一个人拿扳手顶着，室友拿榔头
横向砸，终于出来了（橡皮锤已经不够用了，
专门在旁边ACE hardware买了一把金属榔头
）。漏了好多transmissionoil.
剩下的事情就简单一些了。把买来的used CV先
清洗了一把，为此还去加油站搞了一瓶汽油
作为清洗液，还比较好使，然后对准后，
仍然是用榔头砸回去。然后把CV装上wheel hub。
再装lower control arm，昨天已经装了一遍，
不是很费劲（拆的时候太痛苦了，因为撞弯变形
了）。然后又去ACE hardware买了几个cotter pin,
手册上说这种东西不要重复使用。
这几天新买的工具：30mm的socket(从habour height
买的一套socket里最大是28mm)。金属榔头，锯条，
high temperature grease。
还拧坏一把接socket的rachet（也没完全坏，力矩
小一些的地方还可以使），小手指被擦伤了。
由 |
|
p****s
发帖数: 940 | 30 看来我的车的lower ball joint确实该换了，因为这已经是第三家车铺警告我这个问题
了。但是我的车开起来没有任何异常。问了几家，要价在500-600刀之间，双侧，不知
道这个价格合理吗？ |
|
U*****n
发帖数: 1321 | 31 今天跑去换了front的两个，连零件（自己买）加手工大概是200，不过换完后去做
alignment时被告知left upper ball joint也不行了……
所以现在有些后悔换了lower ball joints,好像也就是开的时候方向盘会自己小角度转动 |
|
j***o
发帖数: 5 | 32 去citytire做车检，没有过=，=问题有两个，一个是passenge low beam要换，还有一
个是front lower control arm bushings要换（感觉这个问题比较严重啊），修一下的
话要700多，不知道这个价钱算合理么，一般要多少钱啊（在NY），谢谢啦 |
|
w**********8
发帖数: 1755 | 33 车子开到40M以上就有点抖，去修车铺检查，
他们说左前轮的那个lower ball joint该换了，part加labor竟然要400刀。
有换过的TX说说这个价格正常吗？
车子是2000年的sable. |
|
p******9
发帖数: 153 | 34 做了inspection，被诊断出lower ball joint，他们说这个不影响我pass inspection
，但是这个是很不安全的，修的话要花564.，其中300 pay 在labor上，我觉得好贵，
大家看看这个问题是迫切需要解决的吗？谢谢。 |
|
k*******q
发帖数: 5493 | 35 哪位大侠知道“Lower Moulding Jack Flap”是在车上哪里的零件，那东西缺失重要么？
谢谢！ |
|
g**n
发帖数: 10 | 36 车子开起来有些偏左
本来以为是alignment问题
修车铺说是lower ball joint松了
只有换新的才能解决问题
要800刀
这个问题严重吗？需要解决吗？ |
|
o*******d
发帖数: 989 | 37 偶然间看了一下power steering fluid,
发现比lower level那条线低了一点点，
请问有关系吗？需要加吗？
多谢! |
|
w*****u
发帖数: 857 | 38 mechanical shop的人说前轮连接不稳定，这个lower control arm需要换，$110 for
parts and $100 for labor.
问问有没有人知道这个make sense吗，如果是需要换我就从了；如果只是被宰，我就不
换了。
多谢 |
|
c********g
发帖数: 4 | 39 求高手指教：
什么是front lower control arm compliance bushing？中文是什么？
车型：Honda, civic EX, 2001.
谢谢！ |
|
g********d
发帖数: 19244 | 40 你就叫他 lower control arm bushing 就行了 |
|
l*****4
发帖数: 267 | 41 去做state inspection 被告知要换lower ball joints需要730刀 当时借口当天没时间
就没有做 上来问一句换这个东西大概要多少钱？
我的车 03 altima |
|
S*****B
发帖数: 404 | 42 先说一下车的症状：2000年的volvo s80
踩刹车时能听到尖锐的金属摩擦声
刹车后车子前后一顿一顿的
行驶在不平的路上，能听到引擎室咣咣的声音
送到firestone去检查，第一个问题说是因为lower control arm磨损了，包在外面的
rubber已经没了，露出里面的金属
第二个问题也是因为这个引起的，而且用手去扳轮胎，轮子是有小幅松动
第三个问题说是engine和引擎舱的连接，那个叫upper motor mount磨损了
这些都修下来，要1500+。。。。严重超预算了
不知道这些问题是不是像firestone说的那样。。。。恳请大家的回复
另外，买零件去华人修车铺修，要注意什么问题呢？ |
|
f*********a
发帖数: 18 | 43 继续网上做功课，发现这款车的lower control arm 在去年初 recall 了 -_-|||
决定周一问dealer是不是给免费换。
如果能给换个全新的，是不是就可以出手了呢？ |
|
W****y
发帖数: 772 | 44 有需要的朋友请PM，谢谢！
Driver's Lower Insulator Cover
Finish off the area under the driver's dash for a cleaner look and added
insulation. This product also comes in handy when installing the optional
interior illumination kit. Mounting the interior illumination light to this
cover provides better floor lighting. Comes with cover, insulation, clips
and rubber installation cap. |
|
W****y
发帖数: 772 | 45 08-12的雅阁road noise相当的大，这东西据说是可以降低engine noise，在V6上配的
，I4上没有，可以自己装。我从这个地方买了trunk tray, trunk lid insulator, 还
有这个lower insulator cover，外加一套wiper blade insert。
http://www.youtube.com/watch?v=epzsMv95ebg |
|
y*********i
发帖数: 28 | 46 最近刚买了一部06年的saturn ion.结果 lower control arm worn out,松动了，总是
发出声音。前轮的两个都必须换。打电话了一圈，报价如下
autozone说一个130元，需要交订金他们去order。
没有问小店铺labor和wheel alignment多少钱。
问了附近四五个提供saturn service的dealer
所有费用加起来有如下报价：
$980, $875, $767,$683,有一个相对比较低 525，
midas说580.
这个价格比较低的店可信吗？是chevrolet的店，saturn的dealer现在基本都挂在他们
名下似乎。问了，说是gm的原厂零件，有12个月的warranty之类的。
第一次修车，不懂，请教我需要注意什么呢 |
|
d*********n
发帖数: 1315 | 47 不换control arm的确不能alignment，之后损坏更严重的时候转向有可能会失控
lower control arm bushing是Volvo的通病，但因为换bushing的人工已经超过了更换
整个control arm的价格，所以一般是要直接换一对control arm，而且切记只能换
Volvo Genuine或者OEM的part，这车挑part
Inner and Outer Tie rod 也是这车经常出问题的地方，如果能换一起换了可以省掉一
些麻烦
只换一对control arm的人工大约2.5-3 hrs，一对Volvo brand control arm大约要$
350-400 |
|
|
s****t
发帖数: 1434 | 49 今天去检查了一下车，结果告诉我，lower ball joint不行了，车轮晃动
我一年半前才换的，怎么这么快就坏了？是当时就偷工减料，还是after market的零件
质量太差？ |
|
s****t
发帖数: 1434 | 50 把车顶起来
发现两侧前轮有轻微晃动余量，修车铺说是lower ball joint坏了，但是说开一次1k
mile的长途也没太大问题
请问我本计划开长途，车普检查了以后，发现上述问题
是不是轮子应该紧紧贴在车上，一点晃动也不能有？ |
|
