由买买提看人间百态

boards

本页内容为未名空间相应帖子的节选和存档,一周内的贴子最多显示50字,超过一周显示500字 访问原贴
_Auto_Fans版 - must buy impact wrench socket?
相关主题
准备学习 DIY了。。 希望各位高手指点。。。8mm hex bolt 基本拧花了
在NJ/NY的车迷大大请进有人要买tools么?
torque wrench有推荐吗?大家说说用的什么sockets吧
【弱问题】和torque wrench配套用的socket叫啥?能否推荐一套换机油的工具?
大家rotate轮胎用的工具是?[合集] 再来:自己做rotation会不会有问题?
大家用的是哪个torque wrench?换 spark需要 torque wrench怎么办?
请推荐工具盒!!350Z MTF replacement (GM synchromesh)
想买一套craftsman的工具,多少的折扣算deal?impact wrench
相关话题的讨论汇总
话题: wrench话题: impact话题: socket话题: buy话题: used
1 (共1页)
G***G
发帖数: 16778
1
just bought an electric impact wrench.
I am wondering if I need to buy impact wrench socket.
I have a lot of regular socket. can they be used for impact wrench?
x*****n
发帖数: 3422
2
yes
Usually impact wrench sockets are supposed to be stronger though.

【在 G***G 的大作中提到】
: just bought an electric impact wrench.
: I am wondering if I need to buy impact wrench socket.
: I have a lot of regular socket. can they be used for impact wrench?

y*******n
发帖数: 10103
3
我们这种穷人只能用水管了。上周换个前齿轮,超大号36mm的bolt,spec说100lb/ft,
但我觉得可能有200以上,加了个水管,估计有半米长,猛搞了一下才松开。
l**********l
发帖数: 4468
4
我还用过jack来帮忙,才拧动。

【在 y*******n 的大作中提到】
: 我们这种穷人只能用水管了。上周换个前齿轮,超大号36mm的bolt,spec说100lb/ft,
: 但我觉得可能有200以上,加了个水管,估计有半米长,猛搞了一下才松开。

G***G
发帖数: 16778
5
good. sometime there is no space for you to use that long tube.
it is easy for you to use such extension to loosen them.
but how could you tighten them to sepcified torque?
tube has no any measure for the torque.
if the bolt didn't reach the specification, it would leave your car in
danger.

【在 y*******n 的大作中提到】
: 我们这种穷人只能用水管了。上周换个前齿轮,超大号36mm的bolt,spec说100lb/ft,
: 但我觉得可能有200以上,加了个水管,估计有半米长,猛搞了一下才松开。

G***G
发帖数: 16778
6
I used once. but limited to space, Jack cannot be used in most case.

【在 l**********l 的大作中提到】
: 我还用过jack来帮忙,才拧动。
G***G
发帖数: 16778
7
where to buy 3/8 inch drive longer handle wrench?
its one end is to hold socket, the other end is handle.

【在 y*******n 的大作中提到】
: 我们这种穷人只能用水管了。上周换个前齿轮,超大号36mm的bolt,spec说100lb/ft,
: 但我觉得可能有200以上,加了个水管,估计有半米长,猛搞了一下才松开。

y*******n
发帖数: 10103
8
有个最大扭矩75lb.ft的torque wrench。先用这个拧紧,再用水管+普通wrench来一下
子就差不多了。 这个bolt用一个bent washer保护,基本不可能松开的。

【在 G***G 的大作中提到】
: good. sometime there is no space for you to use that long tube.
: it is easy for you to use such extension to loosen them.
: but how could you tighten them to sepcified torque?
: tube has no any measure for the torque.
: if the bolt didn't reach the specification, it would leave your car in
: danger.

y*******n
发帖数: 10103
9
到处都是啊,breaker bar
http://www.lowes.com/lowes/lkn?action=productDetail&productId=63457-1074-22802&lpage=none
sears也有的。

【在 G***G 的大作中提到】
: where to buy 3/8 inch drive longer handle wrench?
: its one end is to hold socket, the other end is handle.

G***G
发帖数: 16778
10
thank you.

【在 y*******n 的大作中提到】
: 到处都是啊,breaker bar
: http://www.lowes.com/lowes/lkn?action=productDetail&productId=63457-1074-22802&lpage=none
: sears也有的。

1 (共1页)
相关主题
impact wrench大家rotate轮胎用的工具是?
Craftsman 154 Toolset大家用的是哪个torque wrench?
东北的兄弟们啥时候换夏季胎?请推荐工具盒!!
pittsburg这个牌子的东西怎么样啊想买一套craftsman的工具,多少的折扣算deal?
准备学习 DIY了。。 希望各位高手指点。。。8mm hex bolt 基本拧花了
在NJ/NY的车迷大大请进有人要买tools么?
torque wrench有推荐吗?大家说说用的什么sockets吧
【弱问题】和torque wrench配套用的socket叫啥?能否推荐一套换机油的工具?
相关话题的讨论汇总
话题: wrench话题: impact话题: socket话题: buy话题: used