|
|
|
|
|
|
t*****1 发帖数: 355 | 1 我的电脑开了三个主分区(primary partition). 我在Partition 1安装了Windows 7.然
后用Norton ghost 8.03 DOS版在DOS系统下Backup了Partition 1 并且生成了*.gho文
件.然后再用Norton ghost 8.03 DOS版在DOS系统下restore 这个*.gho镜像文件到
Partition 2.再激活Partition 2.再重新启动电脑, Windows 7启动后一直停留在"
Starting Windows" 介面而不能启动成功.请问如何正确设置启动分区参数才能让
Windows 7正常启动. Windows 7里不采用像XP里面用的boot.ini(可以修改系统启动分
区).如何用BCDEdit来设置正确的Windows 7系统启动分区参数? 非常感谢! | e*******s 发帖数: 1363 | 2 需要把bcd中的device, osdevice等都改到第二个分区去
【在 t*****1 的大作中提到】 : 我的电脑开了三个主分区(primary partition). 我在Partition 1安装了Windows 7.然 : 后用Norton ghost 8.03 DOS版在DOS系统下Backup了Partition 1 并且生成了*.gho文 : 件.然后再用Norton ghost 8.03 DOS版在DOS系统下restore 这个*.gho镜像文件到 : Partition 2.再激活Partition 2.再重新启动电脑, Windows 7启动后一直停留在" : Starting Windows" 介面而不能启动成功.请问如何正确设置启动分区参数才能让 : Windows 7正常启动. Windows 7里不采用像XP里面用的boot.ini(可以修改系统启动分 : 区).如何用BCDEdit来设置正确的Windows 7系统启动分区参数? 非常感谢!
|
|
|
|
|
|