c*******s 发帖数: 127 | 1 几个月前,买了把head ig radical pro. 花了很长时间,终于将string的组合和
tension调好, 感觉也找到了. 决定再买一把. 上周五, 新拍子到了, 一测, 重量多了
6克. 更要命的是, balance差三到四个pt HL. 感觉相差很大.
根本不可能将新拍子调到和旧的一样. 不知道同样的拍子,为何相差这么多? |
K****D 发帖数: 30533 | 2 这个差别有点不正常了。你确定是同一把拍子?:-)
【在 c*******s 的大作中提到】 : 几个月前,买了把head ig radical pro. 花了很长时间,终于将string的组合和 : tension调好, 感觉也找到了. 决定再买一把. 上周五, 新拍子到了, 一测, 重量多了 : 6克. 更要命的是, balance差三到四个pt HL. 感觉相差很大. : 根本不可能将新拍子调到和旧的一样. 不知道同样的拍子,为何相差这么多?
|
c*******s 发帖数: 127 | 3 确定!
【在 K****D 的大作中提到】 : 这个差别有点不正常了。你确定是同一把拍子?:-)
|
b**k 发帖数: 11850 | 4 head质量这么不稳定?。。
【在 c*******s 的大作中提到】 : 几个月前,买了把head ig radical pro. 花了很长时间,终于将string的组合和 : tension调好, 感觉也找到了. 决定再买一把. 上周五, 新拍子到了, 一测, 重量多了 : 6克. 更要命的是, balance差三到四个pt HL. 感觉相差很大. : 根本不可能将新拍子调到和旧的一样. 不知道同样的拍子,为何相差这么多?
|
w******n 发帖数: 13172 | 5 这个差别有点太大了,两把拍子都是从同一个地方买的?确定不是假的?
偶买的wilson家的拍子也经常有差别,但是没这么离谱的。偶的吐血拍,偶都用铅皮把
重量和balance调到差不多 |
z*********n 发帖数: 94654 | 6 6g竟然区别这么大? lol
你们太精细人了吧
【在 w******n 的大作中提到】 : 这个差别有点太大了,两把拍子都是从同一个地方买的?确定不是假的? : 偶买的wilson家的拍子也经常有差别,但是没这么离谱的。偶的吐血拍,偶都用铅皮把 : 重量和balance调到差不多
|
c*******s 发帖数: 127 | 7 对照spec, 一个多3g, 一个少3g. 从TW买的. 应该是运气不好!
【在 b**k 的大作中提到】 : head质量这么不稳定?。。
|
b**k 发帖数: 11850 | 8 ft
看来球拍制造商6sigma不罩啊
不知他们的upper/lower spec是多少
【在 c*******s 的大作中提到】 : 对照spec, 一个多3g, 一个少3g. 从TW买的. 应该是运气不好!
|
K****D 发帖数: 30533 | 9 6g cannot cause 3-4 pt difference.
6g is just an overgrip. It causes 1 pt difference. Must be something
else.
You typically don't feel any difference by this 6g. But 3-4 pt balance
difference is HUGE. That is the key here.
【在 c*******s 的大作中提到】 : 对照spec, 一个多3g, 一个少3g. 从TW买的. 应该是运气不好!
|
K****D 发帖数: 30533 | 10 +/- 3g is nothing really.
If you want precision, go with small brands like Pacific, Techifibre,
Volkl, etc. Overall Wilson is the worst.
【在 b**k 的大作中提到】 : ft : 看来球拍制造商6sigma不罩啊 : 不知他们的upper/lower spec是多少
|
|
|
b**k 发帖数: 11850 | 11 worst best whatever
没有一个能在HL HH上有那么多变化的
【在 K****D 的大作中提到】 : +/- 3g is nothing really. : If you want precision, go with small brands like Pacific, Techifibre, : Volkl, etc. Overall Wilson is the worst.
|
K****D 发帖数: 30533 | 12 Wilson can. My PS 85 was 12 pt HL. It should be 10 pt. What's worse is
that the weight is correct, so I can't fix the balance...
【在 b**k 的大作中提到】 : worst best whatever : 没有一个能在HL HH上有那么多变化的
|
a****n 发帖数: 4734 | 13 好象在公差内, 自己调吧
【在 c*******s 的大作中提到】 : 对照spec, 一个多3g, 一个少3g. 从TW买的. 应该是运气不好!
|
w**a 发帖数: 3510 | 14 技术动作对了拍子哪有那么大差别
【在 c*******s 的大作中提到】 : 几个月前,买了把head ig radical pro. 花了很长时间,终于将string的组合和 : tension调好, 感觉也找到了. 决定再买一把. 上周五, 新拍子到了, 一测, 重量多了 : 6克. 更要命的是, balance差三到四个pt HL. 感觉相差很大. : 根本不可能将新拍子调到和旧的一样. 不知道同样的拍子,为何相差这么多?
|
w******n 发帖数: 13172 | 15 差别当然还是有的。虽说ff拿平底锅也能bagel偶们,他打其他top pro的时候还是很注
意器材的,甚至要根据场地、气候、对手类型来调整拍子重量和线的磅数。
更重要的是,如果你有多个同样的拍子,最好能把它们调成一样的,不然很难换来换去的
【在 w**a 的大作中提到】 : 技术动作对了拍子哪有那么大差别
|
K****D 发帖数: 30533 | 16 Swing weight直接影响你整套动作的timing. 原来调的正好的动作,换个3-4 pt more
head heavy的,直接都全部late.
【在 w**a 的大作中提到】 : 技术动作对了拍子哪有那么大差别
|
b*********s 发帖数: 6757 | 17 Did you have the overgrip on one, but not the other? The overgrip can weigh
6gram.
【在 c*******s 的大作中提到】 : 确定!
|
K****D 发帖数: 30533 | 18 As I mentioned earlier, that doesn't explain the 3-4 point balance
difference.
1 overgrip == 1 pt
weigh
【在 b*********s 的大作中提到】 : Did you have the overgrip on one, but not the other? The overgrip can weigh : 6gram.
|
b*********s 发帖数: 6757 | 19 true, however if he can make a mistake on the grip, he can also make other
human errors during the measurement... :p
【在 K****D 的大作中提到】 : As I mentioned earlier, that doesn't explain the 3-4 point balance : difference. : 1 overgrip == 1 pt : : weigh
|
a****n 发帖数: 4734 | 20 老肯,严谨地说: 一个overgrip会增加多少pt是跟拍子本身的重量和平衡有关的。
【在 K****D 的大作中提到】 : As I mentioned earlier, that doesn't explain the 3-4 point balance : difference. : 1 overgrip == 1 pt : : weigh
|
|
|
K****D 发帖数: 30533 | 21 Yeah, but 1 pt is the ball park.
The racket needs to be around 5 oz to make it 2 pts.
【在 a****n 的大作中提到】 : 老肯,严谨地说: 一个overgrip会增加多少pt是跟拍子本身的重量和平衡有关的。
|
b*********s 发帖数: 6757 | 22 Question: on TW spec, the weigh of a racquet is set. However you can choose
different grip size, would the actual weight vary with the grip size? |
K****D 发帖数: 30533 | 23 No.
choose
【在 b*********s 的大作中提到】 : Question: on TW spec, the weigh of a racquet is set. However you can choose : different grip size, would the actual weight vary with the grip size?
|
a****n 发帖数: 4734 | 24 这个老三问过。我猜是这样: 都是同样的碳纤维管,grip大小形状取决于模子,所以
重量也一样。
choose
【在 b*********s 的大作中提到】 : Question: on TW spec, the weigh of a racquet is set. However you can choose : different grip size, would the actual weight vary with the grip size?
|
K****D 发帖数: 30533 | 25 No, the grip is not graphite. It's plastic or wood.
All grips are hollow.
【在 a****n 的大作中提到】 : 这个老三问过。我猜是这样: 都是同样的碳纤维管,grip大小形状取决于模子,所以 : 重量也一样。 : : choose
|
a****n 发帖数: 4734 | 26 对,好象是后粘上去的。你一说我想起来了
【在 K****D 的大作中提到】 : No, the grip is not graphite. It's plastic or wood. : All grips are hollow.
|
b*********s 发帖数: 6757 | 27 How do they keep the same weight and balance while vary the grip size?
Smaller grip is more dense?
【在 K****D 的大作中提到】 : No, the grip is not graphite. It's plastic or wood. : All grips are hollow.
|
K****D 发帖数: 30533 | 28 Nope, something like this:
Imagine that the 横截面。You got the idea.
【在 b*********s 的大作中提到】 : How do they keep the same weight and balance while vary the grip size? : Smaller grip is more dense?
|
b*********s 发帖数: 6757 | 29 Got it. That's what I mean by "dense". Thanks!
【在 K****D 的大作中提到】 : Nope, something like this: : Imagine that the 横截面。You got the idea.
|
w********u 发帖数: 1865 | 30 300+/-3这个spec很tight啦,哈哈,我是想都不要想的。
【在 b**k 的大作中提到】 : ft : 看来球拍制造商6sigma不罩啊 : 不知他们的upper/lower spec是多少
|
|
|
d****t 发帖数: 1284 | 31 你应该可以把轻的调成和重的一样的balance和weight, 你用6g铅条贴在轻的拍子上,
试不同的位置,看那个位置能达到和重拍一样的balance。
不过你的问题是轻拍是你已经习惯的。
【在 c*******s 的大作中提到】 : 几个月前,买了把head ig radical pro. 花了很长时间,终于将string的组合和 : tension调好, 感觉也找到了. 决定再买一把. 上周五, 新拍子到了, 一测, 重量多了 : 6克. 更要命的是, balance差三到四个pt HL. 感觉相差很大. : 根本不可能将新拍子调到和旧的一样. 不知道同样的拍子,为何相差这么多?
|
J****0 发帖数: 2400 | 32 Dunlop还可以,我几年陆续收了6支M-fil 300,扒光了以后质量差异都在1克以内。
【在 K****D 的大作中提到】 : +/- 3g is nothing really. : If you want precision, go with small brands like Pacific, Techifibre, : Volkl, etc. Overall Wilson is the worst.
|
K****D 发帖数: 30533 | 33 No, there is no way to adjust 3-4 points in balance by adding 6g. It is
simply not possible. Even if this 6g is added at the tip or bottom, it
can at most change about 1.5 points.
3-4 points need at least 16-20g, or 0.5-0.7 oz.
【在 d****t 的大作中提到】 : 你应该可以把轻的调成和重的一样的balance和weight, 你用6g铅条贴在轻的拍子上, : 试不同的位置,看那个位置能达到和重拍一样的balance。 : 不过你的问题是轻拍是你已经习惯的。
|
K****D 发帖数: 30533 | 34 据说Pacific有zero tolerance. 如果差1克,你可以退货。
【在 J****0 的大作中提到】 : Dunlop还可以,我几年陆续收了6支M-fil 300,扒光了以后质量差异都在1克以内。
|
a***8 发帖数: 2433 | 35 你是肯定的知道呀还是猜想是这样呀?内径难道不是已经由beam Width决定了吗?
【在 K****D 的大作中提到】 : Nope, something like this: : Imagine that the 横截面。You got the idea.
|
K****D 发帖数: 30533 | 36 The pallet is not symmetrical. At the bottom of the handle the hole is
much smaller than the beam width.
No, I don't know it for sure and I am guessing. What I know is:
1) all pallets are hollow
2) all pallets have hole(s) at the butt cap side
An eduacated guess would be what I posted previously -- the bigger the
grip size, the hollower.
I've opened up about 5 butt caps so far.
【在 a***8 的大作中提到】 : 你是肯定的知道呀还是猜想是这样呀?内径难道不是已经由beam Width决定了吗?
|
a***8 发帖数: 2433 | 37 自己凭猜测就那么肯定地说别人不对就不太好了,容易造成误导。在拍柄重量控制的方
法上我认为飞筷子的猜测更接近实际工艺。据我观察,拍柄是用反应式注塑成型的(
Reaction Injection Molding - RIM).这种工艺同时把两种相互反应的化学溶剂注入模
具空腔,发生反应固化成型。反应发生时产生微气泡,固体是表面平滑的固化泡沫,轻
而坚固,而且有一定的隔震功能。利用这种工艺只要控制溶剂注入量就可以控制成品重
量,而成品大小可以有一定范围的变化(气泡密度不同)。这样做所有不同拍柄大小的
拍子都可以用同样的拍框,简单方便,质量容易控制,而且节约成本,不需要5,6种不
同的拍框模具。这是我的“eduacated guess”。所以我想飞筷子说密度不同更有道理。
【在 K****D 的大作中提到】 : The pallet is not symmetrical. At the bottom of the handle the hole is : much smaller than the beam width. : No, I don't know it for sure and I am guessing. What I know is: : 1) all pallets are hollow : 2) all pallets have hole(s) at the butt cap side : An eduacated guess would be what I posted previously -- the bigger the : grip size, the hollower. : I've opened up about 5 butt caps so far.
|
K****D 发帖数: 30533 | 38 Looks like you are right. Good to learn something new.
理。
【在 a***8 的大作中提到】 : 自己凭猜测就那么肯定地说别人不对就不太好了,容易造成误导。在拍柄重量控制的方 : 法上我认为飞筷子的猜测更接近实际工艺。据我观察,拍柄是用反应式注塑成型的( : Reaction Injection Molding - RIM).这种工艺同时把两种相互反应的化学溶剂注入模 : 具空腔,发生反应固化成型。反应发生时产生微气泡,固体是表面平滑的固化泡沫,轻 : 而坚固,而且有一定的隔震功能。利用这种工艺只要控制溶剂注入量就可以控制成品重 : 量,而成品大小可以有一定范围的变化(气泡密度不同)。这样做所有不同拍柄大小的 : 拍子都可以用同样的拍框,简单方便,质量容易控制,而且节约成本,不需要5,6种不 : 同的拍框模具。这是我的“eduacated guess”。所以我想飞筷子说密度不同更有道理。
|
c*******s 发帖数: 127 | 39 你说的很对. 重拍拍头较重, 要把它调到我习惯的6.5HL, 我要在加上over grip的基础
上再加约8克的铅条. 轻拍子要加上约14克铅条, 才能调成与重拍一致. 不知调整后
能否习惯. 想一想, 还等USTA的赛季结束后再花时间调吧.
【在 K****D 的大作中提到】 : No, there is no way to adjust 3-4 points in balance by adding 6g. It is : simply not possible. Even if this 6g is added at the tip or bottom, it : can at most change about 1.5 points. : 3-4 points need at least 16-20g, or 0.5-0.7 oz.
|
p*****u 发帖数: 711 | |
|
|
c*******s 发帖数: 127 | 41 忠情啊!
【在 p*****u 的大作中提到】 : 为啥买两把一样的?
|
j***w 发帖数: 5379 | 42 器材派的。
【在 z*********n 的大作中提到】 : 6g竟然区别这么大? lol : 你们太精细人了吧
|
j***w 发帖数: 5379 | 43 不要跟pro比,没有意义。
去的
【在 w******n 的大作中提到】 : 差别当然还是有的。虽说ff拿平底锅也能bagel偶们,他打其他top pro的时候还是很注 : 意器材的,甚至要根据场地、气候、对手类型来调整拍子重量和线的磅数。 : 更重要的是,如果你有多个同样的拍子,最好能把它们调成一样的,不然很难换来换去的
|
f*****n 发帖数: 18176 | 44 人老井跑得比pro快
【在 j***w 的大作中提到】 : 不要跟pro比,没有意义。 : : 去的
|