l**k
发帖数: 1755 | 1 DIY PIC Programmer
WII的modchip已经出了好几种了，比较了很久，最后决定买wiikey，好像市面上的评价
很好。可是preorder了之后，左等不来，右等不来，。。。终于怒了。正好看见DIY的
wiifree介绍,终于决定cancel了wiikey的order。我老人家也DIY一把。
言归正传：
1． Modcip.
我用的是 8 ping PIC12F629,
Link: http://www.microchip.com/stellent/idcplg?IdcService=SS_GET_PAGE&nodeId=1335&dDocName=en010113
如果你有学校或者公司的email的话，还可以order free sample.
Link: http://sample.microchip.com/Default.aspx?testCookies=true
我就是用的公司账号，一下order了3个 :)
另外ebay上卖得也很多，都不贵。
2． PIC programmer.
有了chip,还的program。很多人都是从ebay上order. JDM | l**k
发帖数: 1755 | 2 My Precious ugly programmer :D | l**k
发帖数: 1755 | 3 BTW
Just remembered one thing:
If you order free sample from microchip.com, choose:
PIC MicroControllers -> PIC12F629 ->
PIC12F629-I/P 8 PDIP -40C to +85C TUBE
This is the one I used and it works | l**k
发帖数: 1755 | 4 If I remember correctly, the pin out for IRF510 from left to right should be
GDS. (Look at my PIC programmer picture in my second post). So you have to
be careful since it is different from 2n700 in my circuit diagram.
If you follow the tutorial with no mistake, the first time you try to read
from a blank chip, you should get 3FFF in all address. (Use read all button
on toolbar).
Then you load the hex file, click program all. if you didn't see exact the
same msg "OsCCAL = 3428h Do you want to us | l**k
发帖数: 1755 | 5 "I use IRF 510, from left to right(with the letters in sight): G,D,S
The 12F629, top view (with the letters in sight), dent on the left: is the
left bottom dot shown as "1" on the picture?" |
|
