d*****w
发帖数: 688 | 1 朋友打电话来，结果OBI200响了一下就挂了。再试，拨号方的错误提示是the number
you are trying to call is not reachable.PPS 6180
在这种情况下，GV甚至不会将call转移到手机
到底是GV的问题，还是OBI200?
大家有没有碰到同样问题， |
f******o
发帖数: 2469 | 2 升级固件
【在 d*****w 的大作中提到】
: 朋友打电话来，结果OBI200响了一下就挂了。再试，拨号方的错误提示是the number
: you are trying to call is not reachable.PPS 6180
: 在这种情况下，GV甚至不会将call转移到手机
: 到底是GV的问题，还是OBI200?
: 大家有没有碰到同样问题，
|
d*****w
发帖数: 688 | 3 即便OBI有问题，也就是接不到电话而已。而电话不能forwarding到手机似乎应该是GV
的问题
好像OBI今年没有升级firmware吧
【在 f******o 的大作中提到】
: 升级固件
|
f******o
发帖数: 2469 | 4
GV
3.2.2 (Build: 6259)
http://fw.obihai.com/OBi302-3-2-2-6259.fw
Supported Products:
OBi200
OBi202
OBi300
OBi302
Firmware Build 3.2.2 (6259)
May 22, 2019
IMPORTANT NOTICE: Once upgraded to this firmware, the device can no longer
accept previous firmware versions (Build 5895 and below)
Features and Enhancements:
Added support for Entrust Root CA
Added support for Entrust Root CA - G2
Add a new parameter CidNumberTransfer that is Digit map to transform Caller
ID Number before sending it to the phone, with the default value (<+:>xx.)
This digit map is applied to the number after stripping all non-digits with
the exception of the leading + character, if exists. Hence the default map
is to strip the leading + character, making the behavior the same as the
older versions. For users who want to include the leading + in the caller id
number, they can simply set the value of this parameter to an empty value.
Any number that does not match this digit map would be sent to phone without
transformation. To transform the leading + to 00, change the value to (<+:
00>xx.)
Bug Fixes:
Updated default value of ConfigURL (under ITSP Provisioning) to tftp://$
DHCPOPT66/$DM.xml;$DHCPOPT66;${DHCPOPT66}${DM}Template.xm
X_MWISubscribeURI configured value is corrupted and will be shown as a bogus
value in SUBSCRIBE Request-URI and TO header for message-summary event
【在 d*****w 的大作中提到】
: 即便OBI有问题，也就是接不到电话而已。而电话不能forwarding到手机似乎应该是GV
: 的问题
: 好像OBI今年没有升级firmware吧
|
d*****w
发帖数: 688 | 5 直接升级6259不成功，转而升级5921，成功但不解决问题。
再从5921升级到6259，升级成功，但情况更糟，干脆不能打电话也接不到电话了。
再从6259降级到5921，可以拨号，但打电话还是无法接通。好像是GV无法授权打电话了
，有点像因为prepay没有钱的感觉。
感觉不是OBIHAI问题，而是GV账号问题，但查不出原因。
GV在玩什么幺蛾子？ |
