n********r 发帖数: 719 | 1 上来求助一下, 大牛们帮忙看一下吧,多谢!
现在的状态是Router1的WAN口连接Modem, Router1的LAN口连接Router2的WAN口
Router2的LAN口连接一台电脑的网卡
现在按照以下的设置来配置路由器,结果有线连接Router2的电脑可以正常上网,移动
设备可以搜索到Router2的SSID,也可以验证无线网密码,但是到了Obtain IP address
那一步就失败了,这些设备都可以正常的利用Router1的无线网络上网
具体配置是
Router 1 - Netgear JNR 3210
IP Address: 192.168.1.1
Internet IP Address: Get Dynamically from ISP
Domain Name Server (DNS) Address: Get Automatically from ISP
Enable SSID Broadcast
Channel: 06
Mode: Up to 300Mbps
Security Options: WPA2-PSK [AES]
LAN Port:
DHCP Server: On
Internet Port:
Connection: DHCPClient
IP Subnet Mask: 255.255.254.0
Domain Name Server: 75.75.75.75 75.75.76.76
Router 2 - D-link DIR-655
My Internet Connection is : Dynamic ID (DHCP)
Hostname: (Blank)
Use Unicasting : Yes(compatibility for some DHCP Servers)
Primary DNS Server : 0.0.0.0
Enable Wireless : Yes
802.11 Mode: Mixed 802.11n, 802.11g and 802.11b
Wireless Channel: 11
Channel Width: Auto 20/40 MHz
Visibility: Visible
Security Mode: WPA-Personal
WPA Mode: WPA2 Only
Cipher Type: AES
Router IP address: 192.168.0.1 (The IP Address that is configured here is
the IP Address that you use to access the Web-based management interface. )
Enable DNS Relay: Yes
Enable DHCP Server: No |
c****t 发帖数: 759 | 2 改正:把2个router lan连接就可
建议:2个router SSID/密码可相同. |
a*******w 发帖数: 3805 | 3 Right on.
【在 c****t 的大作中提到】 : 改正:把2个router lan连接就可 : 建议:2个router SSID/密码可相同.
|
s**********d 发帖数: 36899 | 4 正常你要用router 2 lan port来连到router 1,不能用WAN。
除非你router有wireless AP mode,那样才能用WAN去连。 |
s**********d 发帖数: 36899 | 5
相同也是两个分开的。设备不会把他们认为是一个wifi,最好还是用不同的你还知道
哪个是哪个。
【在 c****t 的大作中提到】 : 改正:把2个router lan连接就可 : 建议:2个router SSID/密码可相同.
|
t****9 发帖数: 1100 | |
t****4 发帖数: 7500 | |
t****4 发帖数: 7500 | |