F*********n 发帖数: 2914 | 1 最后一步安装超频的kernal的时候,从PREWARE的主界面点List of Everything,找到
WarthogKernel(Touchpad),两个cpu都可以超频到1.728G,再高的话机器可能会不稳
定。已经装了F15 Eagle的可以先用preware卸掉,机器重启后再装WarthogKernel。
还有一个好处就是每次开机机器不会跳出F15 得图标和很多行字,搞得好像中了毒似的。
具体步骤不懂的话可以参考这个帖子
http://www.mitbbs.com/article_t/PDA/31559791.html
[Disclaimer : Currently unixPsycho's newest Kernel supports 1.9 but a lot of
units so far freeze when trying to reach that amount. Please stay on 1.7Ghz
for now until more information arrives . BTW 1.7Ghz PWNS!]
Reported : UnixPsycho's Kernel as of 8/27/11 sometimes does not overclock
the second core. This is widespread and many experience this. An alternate
Kernel to download is Warthog. Warthog's Kernel can do 1.7Ghz on both cores.
If Unixpsycho's Kernel does not work correctly for you, you can simply
uninstall it VIA preware, restart your HP touchpad, find and install Warthog
's kernel via PREWARE, and restart your HP touchpad again. This could be
good for you as well |
t*******y 发帖数: 2432 | |
F*********n 发帖数: 2914 | 3 1.8稳定吗?每次开机会不会跳出图标和很多字?
【在 t*******y 的大作中提到】 : f4 phantom可以超到1.8 : 双芯同时
|
t*******y 发帖数: 2432 | 4 跳出图标和很多字和稳定性没关系
其他的kernels没跳出来只是把那些隐藏在hp图标后面了
1.8还可以吧
ld玩了一个多小时的极品了
【在 F*********n 的大作中提到】 : 1.8稳定吗?每次开机会不会跳出图标和很多字?
|
d********3 发帖数: 7220 | 5 大哥,F15C也是双核齐超好不好,我都超1.8也从来没出过问题,而且最新版本支持文
件夹中文了!又不经常关机的管那些闪字做啥 |
N****w 发帖数: 21578 | 6 F15C 的 profile 是选 OnDemandCTL 还是 OnDemand 好?
【在 d********3 的大作中提到】 : 大哥,F15C也是双核齐超好不好,我都超1.8也从来没出过问题,而且最新版本支持文 : 件夹中文了!又不经常关机的管那些闪字做啥
|
t*******y 发帖数: 2432 | 7 f15c我有一个核总是比另一个核用得多
f4倒没有这个问题
【在 d********3 的大作中提到】 : 大哥,F15C也是双核齐超好不好,我都超1.8也从来没出过问题,而且最新版本支持文 : 件夹中文了!又不经常关机的管那些闪字做啥
|
t*******y 发帖数: 2432 | 8 ondemand
【在 N****w 的大作中提到】 : F15C 的 profile 是选 OnDemandCTL 还是 OnDemand 好?
|