m*******0 发帖数: 119 | 1 初来乍到,弱问:
现有量子点的甲苯溶液。
想要用另外一种溶剂将量子点进行沉淀。
是不是用加入无水甲醇(或其它有机溶剂),搅拌就行了?
需要回流啥的吗?
谢谢指教。 |
m*******0 发帖数: 119 | 2 没人理我啊。。。看来这个问题太弱了。。
【在 m*******0 的大作中提到】 : 初来乍到,弱问: : 现有量子点的甲苯溶液。 : 想要用另外一种溶剂将量子点进行沉淀。 : 是不是用加入无水甲醇(或其它有机溶剂),搅拌就行了? : 需要回流啥的吗? : 谢谢指教。
|
d*****3 发帖数: 3702 | 3 take QD-TOPO for example, methanol, ethanol, or isopropanol can be used for
precipitation; room temperature, no stirring or refluxing needed.
add minimum amount of alcohol to precipitate the quantum dots, a little bit
tricky especially when you want to purify quantum dots from reaction
solution.
good luck.
【在 m*******0 的大作中提到】 : 初来乍到,弱问: : 现有量子点的甲苯溶液。 : 想要用另外一种溶剂将量子点进行沉淀。 : 是不是用加入无水甲醇(或其它有机溶剂),搅拌就行了? : 需要回流啥的吗? : 谢谢指教。
|
m*******0 发帖数: 119 | 4 多谢指教。
我是想通过沉淀的方法,把量子点的甲苯溶剂换成chloroform。
for
bit
【在 d*****3 的大作中提到】 : take QD-TOPO for example, methanol, ethanol, or isopropanol can be used for : precipitation; room temperature, no stirring or refluxing needed. : add minimum amount of alcohol to precipitate the quantum dots, a little bit : tricky especially when you want to purify quantum dots from reaction : solution. : good luck.
|
d*****3 发帖数: 3702 | 5 1. Add excess amount of alcohol to precipitate
2. Vacuum/heat to completely remove toluene, then re-dissolve in chloroform
【在 m*******0 的大作中提到】 : 多谢指教。 : 我是想通过沉淀的方法,把量子点的甲苯溶剂换成chloroform。 : : for : bit
|
m*******0 发帖数: 119 | 6 Thanks.
是否必须使用vacuum?使用什么仪器?
直接加热行不?
我是外行....
thanks
chloroform
【在 d*****3 的大作中提到】 : 1. Add excess amount of alcohol to precipitate : 2. Vacuum/heat to completely remove toluene, then re-dissolve in chloroform
|