H******7 发帖数: 34403 | |
e********t 发帖数: 9607 | 2 在阿富汗买新房了?
【在 H******7 的大作中提到】 : 有没有重设code的功能什么的?
|
H******7 发帖数: 34403 | 3 要去坎大哈了,美国的房子报警器想用起来
【在 e********t 的大作中提到】 : 在阿富汗买新房了?
|
j**o 发帖数: 6425 | 4 帮你放狗了,给俩包子吧
To Reset the Installer Code
1
Reset the Honeywell security alarm by unplugging the transformer to
disconnect it from the power source. Disconnect the battery. If the
installer code needs to be changed, you will have to reset the entire system
. The alarm company will not give out the installer code, since it is
typically used for the installation of many different alarm systems.
2
Plug the alarm system transformer back in, then reconnect the battery.
3
Press * and # simultaneously within 30 seconds of turning the alarm system
back on. A "20" should appear on the display.
4Enter a new four-digit installer code. Press "1." The alarm system should
beep once to let you know the code has been reset properly. If it does not,
repeat the process.
【在 H******7 的大作中提到】 : 有没有重设code的功能什么的?
|
H******7 发帖数: 34403 | 5 这样的话感应器是否也要有变动呢?
system
【在 j**o 的大作中提到】 : 帮你放狗了,给俩包子吧 : To Reset the Installer Code : 1 : Reset the Honeywell security alarm by unplugging the transformer to : disconnect it from the power source. Disconnect the battery. If the : installer code needs to be changed, you will have to reset the entire system : . The alarm company will not give out the installer code, since it is : typically used for the installation of many different alarm systems. : 2 : Plug the alarm system transformer back in, then reconnect the battery.
|
j**o 发帖数: 6425 | 6 我家的不需要变动
master code只是个系统密码,修改功能时用的
【在 H******7 的大作中提到】 : 这样的话感应器是否也要有变动呢? : : system
|
H******7 发帖数: 34403 | 7 你家是什么型号?我这个看着写得是LYNXR-EN,但网上找到的说明书面板看上去很不一
样。
刚才乱按了一通,结果fire alarm叫得我耳朵都要炸了,不知怎么停下来,只好拔掉里
面的信号线。
【在 j**o 的大作中提到】 : 我家的不需要变动 : master code只是个系统密码,修改功能时用的
|
e********t 发帖数: 9607 | 8 金砖带走吗?
【在 H******7 的大作中提到】 : 要去坎大哈了,美国的房子报警器想用起来
|
k******e 发帖数: 1579 | 9 You can ask them.i guess they are stil alive
【在 H******7 的大作中提到】 : 有没有重设code的功能什么的?
|
H******7 发帖数: 34403 | 10 第四步进行不下去,按了"1"后无反应
system
【在 j**o 的大作中提到】 : 帮你放狗了,给俩包子吧 : To Reset the Installer Code : 1 : Reset the Honeywell security alarm by unplugging the transformer to : disconnect it from the power source. Disconnect the battery. If the : installer code needs to be changed, you will have to reset the entire system : . The alarm company will not give out the installer code, since it is : typically used for the installation of many different alarm systems. : 2 : Plug the alarm system transformer back in, then reconnect the battery.
|