w**********9 发帖数: 1058 | 1 敲瓷砖还不算太麻烦,不过下面还有一层水泥铺在plywood上。大家有没有经验怎么弄
?还是硬敲?
多谢了! |
g*****9 发帖数: 4125 | 2 http://www.youtube.com/watch?v=R1k6PwwMepI
【在 w**********9 的大作中提到】 : 敲瓷砖还不算太麻烦,不过下面还有一层水泥铺在plywood上。大家有没有经验怎么弄 : ?还是硬敲? : 多谢了!
|
w**********9 发帖数: 1058 | 3 靠,还得去租一个。这不会把下面的plywood弄坏吧? |
v**a 发帖数: 2062 | 4 这个工具只不过弄得更容易省事些。手工工具慢慢敲打就可以了。 |
R**R 发帖数: 3318 | 5 gezhi因为你的房子像她的一样大呢,怕累坏你。她推荐的,全是专业的。 |
g*****9 发帖数: 4125 | 6 This tool will have less chance of damaging the plywood (compare to the hand
tool)
Just let the tool work at its own pace, do not force (push) too hard on it.
You will also need a mask and knee pads.
Very messy job, but take your time (if you do not want to damage your
plywood)
【在 w**********9 的大作中提到】 : 靠,还得去租一个。这不会把下面的plywood弄坏吧?
|
w**********9 发帖数: 1058 | 7 还是单爷知道我们穷人。:)
我的也就5尺乘4尺的一小块地方。等我先手工试试,不行就上工具吧。
对了,单爷,我还去买了你说的angle grinder,还没用上,是不是自己敲完以后磨地
板的?
【在 R**R 的大作中提到】 : gezhi因为你的房子像她的一样大呢,怕累坏你。她推荐的,全是专业的。
|
T*********e 发帖数: 9208 | 8 grinder估计会引起蘑菇云,底下是水泥的话,浇一层self leveling compound就可以了
【在 w**********9 的大作中提到】 : 还是单爷知道我们穷人。:) : 我的也就5尺乘4尺的一小块地方。等我先手工试试,不行就上工具吧。 : 对了,单爷,我还去买了你说的angle grinder,还没用上,是不是自己敲完以后磨地 : 板的?
|
|
g*****9 发帖数: 4125 | 9 Rent this tool does not cost much for half a day.
Also with hand tool, one mistake, you will damage the plywood, (it will cost
you more to replace the plywood)
【在 w**********9 的大作中提到】 : 还是单爷知道我们穷人。:) : 我的也就5尺乘4尺的一小块地方。等我先手工试试,不行就上工具吧。 : 对了,单爷,我还去买了你说的angle grinder,还没用上,是不是自己敲完以后磨地 : 板的?
|
w**********9 发帖数: 1058 | 10 我得把水泥去掉换木地板。
以了
【在 T*********e 的大作中提到】 : grinder估计会引起蘑菇云,底下是水泥的话,浇一层self leveling compound就可以了
|
w**********9 发帖数: 1058 | 11 好吧,我去Homedepot看看。
cost
【在 g*****9 的大作中提到】 : Rent this tool does not cost much for half a day. : Also with hand tool, one mistake, you will damage the plywood, (it will cost : you more to replace the plywood)
|
T*********e 发帖数: 9208 | 12 那就按gezhi说的搞,好工具事半功倍,grinder你可以试试,要趴在地上搞,很不顺手
,还容易磨到下面
【在 w**********9 的大作中提到】 : 我得把水泥去掉换木地板。 : : 以了
|
w**********9 发帖数: 1058 | 13 我是看水泥好象是铺在一层网上的,而且边缘和plywood间有小缝隙,想用凿子试试的
,想着是不是楔进去能一撬一大快的。:)
【在 T*********e 的大作中提到】 : 那就按gezhi说的搞,好工具事半功倍,grinder你可以试试,要趴在地上搞,很不顺手 : ,还容易磨到下面
|
T*********e 发帖数: 9208 | 14 try it urself, tool is to make it easier and faster
【在 w**********9 的大作中提到】 : 我是看水泥好象是铺在一层网上的,而且边缘和plywood间有小缝隙,想用凿子试试的 : ,想着是不是楔进去能一撬一大快的。:)
|