m******m
发帖数: 644 | |
C*******d
发帖数: 15836 | 2 I guess you have electric heater. If that is the case, you need to replace
its heating elements. I had the same problem and it was totally solved after
I replaced them and flushed the heater. |
m******m
发帖数: 644 | 3 thank you for your response. Did you do it or call somebody else? is it
expensive?
after
【在 C*******d 的大作中提到】
: I guess you have electric heater. If that is the case, you need to replace
: its heating elements. I had the same problem and it was totally solved after
: I replaced them and flushed the heater.
|
h*d
发帖数: 19309 | 4 看看热水器温度设置够不够高？
【在 m******m 的大作中提到】
: 谢谢
|
g*****9
发帖数: 4125 | 5 First you need to provide more info. What kind of water heater to you have?
(such as tank type, tank less or hybrid)
If it is tank type (most common one), how big? gas or eletric? age? temp
setting?
You may need to set your temp to the highest if your cold water was really
cold (depend on where you live).
If that still does not solve your problem, you might need to switch to
bigger tank if space allows, if not, you will need one with higher recovery
rate.
【在 m******m 的大作中提到】
: 谢谢
|
C*******d
发帖数: 15836 | 6 I did that myself. Bought $34 kit from Home Depot with both heating elements
and wrench. Before you do that, you can measure the resistivity of the
heating elements. If it is too high, then there is problem. Then you can
decide what to do next. If you do need to replace it, you need to drain your
heater fully to avoid flooding. But since you'd better flush your heater
anyway, you are not doing anything extra. You can easily find videos on
Youtube to teach you how to change it.
【在 m******m 的大作中提到】
: thank you for your response. Did you do it or call somebody else? is it
: expensive?
:
: after
|
