R**R
发帖数: 3318 | 1 Tool chest is very useful to organize small piece of tools, wire, etc.
How to make it? Not hard.
Just put small boxes in a bigger box with drawer track.
如图：
Materials: Drawer face: solid oak,
Others: plywood.
Drawer handle：Home made with 1/4” SS tubing.
If some people like, I will provide more detail.
This project is for DIY ability level 2. (scale 0 to 5)
见笑。 |
T*********e
发帖数: 9208 | 2 nice, details pls
【在 R**R 的大作中提到】
: Tool chest is very useful to organize small piece of tools, wire, etc.
: How to make it? Not hard.
: Just put small boxes in a bigger box with drawer track.
: 如图：
: Materials: Drawer face: solid oak,
: Others: plywood.
: Drawer handle：Home made with 1/4” SS tubing.
: If some people like, I will provide more detail.
: This project is for DIY ability level 2. (scale 0 to 5)
: 见笑。
|
i*******d
发帖数: 1430 | 3 服了，连drawer handle都自己做的牛人。你自己弯的管子？不过这倒是能省不少钱。
这破玩意儿卖的贵。
【在 R**R 的大作中提到】
: Tool chest is very useful to organize small piece of tools, wire, etc.
: How to make it? Not hard.
: Just put small boxes in a bigger box with drawer track.
: 如图：
: Materials: Drawer face: solid oak,
: Others: plywood.
: Drawer handle：Home made with 1/4” SS tubing.
: If some people like, I will provide more detail.
: This project is for DIY ability level 2. (scale 0 to 5)
: 见笑。
|
n********n
发帖数: 641 | 4 太有用了
一直想买个这样的,没找到,能介绍一下你具体是怎么做的吗?
谢谢!!
【在 R**R 的大作中提到】
: Tool chest is very useful to organize small piece of tools, wire, etc.
: How to make it? Not hard.
: Just put small boxes in a bigger box with drawer track.
: 如图：
: Materials: Drawer face: solid oak,
: Others: plywood.
: Drawer handle：Home made with 1/4” SS tubing.
: If some people like, I will provide more detail.
: This project is for DIY ability level 2. (scale 0 to 5)
: 见笑。
|
g*****9
发帖数: 4125 | 5 Very nice, I guess it is much cheaper than the snap on I got on sale. Would
you mind showing the tool collection you have inside.
【在 R**R 的大作中提到】
: Tool chest is very useful to organize small piece of tools, wire, etc.
: How to make it? Not hard.
: Just put small boxes in a bigger box with drawer track.
: 如图：
: Materials: Drawer face: solid oak,
: Others: plywood.
: Drawer handle：Home made with 1/4” SS tubing.
: If some people like, I will provide more detail.
: This project is for DIY ability level 2. (scale 0 to 5)
: 见笑。
|
w**********9
发帖数: 1058 | |
R********r
发帖数: 3415 | 7 very very nice
【在 R**R 的大作中提到】
: Tool chest is very useful to organize small piece of tools, wire, etc.
: How to make it? Not hard.
: Just put small boxes in a bigger box with drawer track.
: 如图：
: Materials: Drawer face: solid oak,
: Others: plywood.
: Drawer handle：Home made with 1/4” SS tubing.
: If some people like, I will provide more detail.
: This project is for DIY ability level 2. (scale 0 to 5)
: 见笑。
|
f****i
发帖数: 20252 | 8 他用的那种一个handle2块5，OSH有卖
【在 i*******d 的大作中提到】
: 服了，连drawer handle都自己做的牛人。你自己弯的管子？不过这倒是能省不少钱。
: 这破玩意儿卖的贵。
|
r*****q
发帖数: 1511 | |
R**R
发帖数: 3318 | 10 工具又不是自己做的，没什么可看的。别让新人因为一定要有这么多工具才可以干活。
别误导新人。
BTW；I don’t have many tools from the snap on. It is too expensive to me.
Would
【在 g*****9 的大作中提到】
: Very nice, I guess it is much cheaper than the snap on I got on sale. Would
: you mind showing the tool collection you have inside.
|
|
|
o****d
发帖数: 1346 | 11 wa,新人就可以做这个了。
这木头在homedeopot就可以买到了吗，看着真专业。
很像dresser，装衣服也不错呢。
【在 R**R 的大作中提到】
: 工具又不是自己做的，没什么可看的。别让新人因为一定要有这么多工具才可以干活。
: 别误导新人。
: BTW；I don’t have many tools from the snap on. It is too expensive to me.
:
: Would
|
R**R
发帖数: 3318 | 12 根据所需决定大小。图1没腿， 图2有腿。有问题再问。
【在 R**R 的大作中提到】
: Tool chest is very useful to organize small piece of tools, wire, etc.
: How to make it? Not hard.
: Just put small boxes in a bigger box with drawer track.
: 如图：
: Materials: Drawer face: solid oak,
: Others: plywood.
: Drawer handle：Home made with 1/4” SS tubing.
: If some people like, I will provide more detail.
: This project is for DIY ability level 2. (scale 0 to 5)
: 见笑。
|
c********h
发帖数: 7827 | |
g*****9
发帖数: 4125 | 14 Yeah, I only have one full set of hand tools from snap on too, and it was a
gift. I bought a snap on tool chest similar to the one you made. I was just
trying to get a idea what kind of tools you store in them, I have made a
similar one before, but the tools are a little too heavy for the draw bottom
, that is why I got the snap on on sale. so I plan to over engineer on the
next one I make.
【在 R**R 的大作中提到】
: 工具又不是自己做的，没什么可看的。别让新人因为一定要有这么多工具才可以干活。
: 别误导新人。
: BTW；I don’t have many tools from the snap on. It is too expensive to me.
:
: Would
|
c****8
发帖数: 807 | |
g*****9
发帖数: 4125 | 16 Do you have 18 drawers or 12 drawers?
From your picture, looks like each drawer have two pulls, that makes me
think, you only have two drawers on each level, one with two pulls and one
with one pull. My concern is the two pull drawer have a large span on the
bottom, will it sag over time (I am having that problem right now with the
one made)
【在 R**R 的大作中提到】
: 根据所需决定大小。图1没腿， 图2有腿。有问题再问。
|
R**R
发帖数: 3318 | 17 ops,居然把你也蒙了。
Itis 6 drawers。
One drawer has three pulls.
I am not using this one for hand tools. I have another metal chest for heavy
stuff.
【在 g*****9 的大作中提到】
: Do you have 18 drawers or 12 drawers?
: From your picture, looks like each drawer have two pulls, that makes me
: think, you only have two drawers on each level, one with two pulls and one
: with one pull. My concern is the two pull drawer have a large span on the
: bottom, will it sag over time (I am having that problem right now with the
: one made)
|
g*****9
发帖数: 4125 | 18 That is what thought until I see your picture of two pulls per drawer.
Any way, provide details on how you made the pull and how they attach to the
drawer. Rotary draw bender?
heavy
【在 R**R 的大作中提到】
: ops,居然把你也蒙了。
: Itis 6 drawers。
: One drawer has three pulls.
: I am not using this one for hand tools. I have another metal chest for heavy
: stuff.
|
s********2
发帖数: 152 | 19 我上次在朋友家看见了您帮他们做的basement waterproofing，已经对您崇拜得不行。
现在又看到这么DIY作品，实在是崇拜之情有如滔滔江水。有机会一定要向您请教。
【在 R**R 的大作中提到】
: Tool chest is very useful to organize small piece of tools, wire, etc.
: How to make it? Not hard.
: Just put small boxes in a bigger box with drawer track.
: 如图：
: Materials: Drawer face: solid oak,
: Others: plywood.
: Drawer handle：Home made with 1/4” SS tubing.
: If some people like, I will provide more detail.
: This project is for DIY ability level 2. (scale 0 to 5)
: 见笑。
|
R**R
发帖数: 3318 | 20 不好，被人肉到了。
请教，不敢。交流而已。
让你朋友开party.
【在 s********2 的大作中提到】
: 我上次在朋友家看见了您帮他们做的basement waterproofing，已经对您崇拜得不行。
: 现在又看到这么DIY作品，实在是崇拜之情有如滔滔江水。有机会一定要向您请教。
|
|
|
R**R
发帖数: 3318 | 21 The handle is made with 1/4" inch of SS tubing bended with the tubing bender
and make a thread on each end.
Is it clear?
the
【在 g*****9 的大作中提到】
: That is what thought until I see your picture of two pulls per drawer.
: Any way, provide details on how you made the pull and how they attach to the
: drawer. Rotary draw bender?
:
: heavy
|
g*****9
发帖数: 4125 | 22 Crystal clear and thanks. Would you mind tell me how much the SS tubing cost
(18/10?), I think I might be able to buy similar looking pull ready made
just as cheap.
Thank you so much.
bender
【在 R**R 的大作中提到】
: The handle is made with 1/4" inch of SS tubing bended with the tubing bender
: and make a thread on each end.
: Is it clear?
:
: the
|
R**R
发帖数: 3318 | 23 I got for nothing.Some body gave to me.
I check online, it is about $17/6ft.Is it not bad.
cost
【在 g*****9 的大作中提到】
: Crystal clear and thanks. Would you mind tell me how much the SS tubing cost
: (18/10?), I think I might be able to buy similar looking pull ready made
: just as cheap.
: Thank you so much.
:
: bender
|
s*u
发帖数: 2240 | 24 你太牛了～
连garage装工具的都是solid oak！
【在 R**R 的大作中提到】
: Tool chest is very useful to organize small piece of tools, wire, etc.
: How to make it? Not hard.
: Just put small boxes in a bigger box with drawer track.
: 如图：
: Materials: Drawer face: solid oak,
: Others: plywood.
: Drawer handle：Home made with 1/4” SS tubing.
: If some people like, I will provide more detail.
: This project is for DIY ability level 2. (scale 0 to 5)
: 见笑。
|
g*****9
发帖数: 4125 | 25 Thank you.
Do you work with metal a lot? I worked with wood for a long time now, a few
years ago developed interest in working with metal, but still have very few
tool for it (lathe and some welding equipment). But recently got more time,
so I think I will try to build one out of metal this time, any tips and
suggestions.
【在 R**R 的大作中提到】
: I got for nothing.Some body gave to me.
: I check online, it is about $17/6ft.Is it not bad.
:
: cost
|
K**********r
发帖数: 2640 | 26 我也正想说呢，LD最近要买bedroom set,要是会做就好了，这得省多少呀。
LZ家真好。
【在 o****d 的大作中提到】
: wa,新人就可以做这个了。
: 这木头在homedeopot就可以买到了吗，看着真专业。
: 很像dresser，装衣服也不错呢。
|
S**********s
发帖数: 2033 | |
b*****l
发帖数: 1594 | 28 顶礼膜拜。不服不行啊。
【在 R**R 的大作中提到】
: Tool chest is very useful to organize small piece of tools, wire, etc.
: How to make it? Not hard.
: Just put small boxes in a bigger box with drawer track.
: 如图：
: Materials: Drawer face: solid oak,
: Others: plywood.
: Drawer handle：Home made with 1/4” SS tubing.
: If some people like, I will provide more detail.
: This project is for DIY ability level 2. (scale 0 to 5)
: 见笑。
|
R**R
发帖数: 3318 | 29 Do you have something you want to make?
few
few
,
【在 g*****9 的大作中提到】
: Thank you.
: Do you work with metal a lot? I worked with wood for a long time now, a few
: years ago developed interest in working with metal, but still have very few
: tool for it (lathe and some welding equipment). But recently got more time,
: so I think I will try to build one out of metal this time, any tips and
: suggestions.
|
g*****9
发帖数: 4125 | 30 Yes, tool chest. I run out of space in my snap on the day I got it plus I
got some bigger tools I would like to put in drawer type tool chest. Have
not done much with metal yet, only cut , bend and weld some storage shelf
frame. But am very proud of the BBQ I made for lamb (very similar to what
you see chinese street seller use)
【在 R**R 的大作中提到】
: Do you have something you want to make?
:
: few
: few
: ,
|
|
|
R**R
发帖数: 3318 | 31 Show us a picture.
May be somebody like to make one.
【在 g*****9 的大作中提到】
: Yes, tool chest. I run out of space in my snap on the day I got it plus I
: got some bigger tools I would like to put in drawer type tool chest. Have
: not done much with metal yet, only cut , bend and weld some storage shelf
: frame. But am very proud of the BBQ I made for lamb (very similar to what
: you see chinese street seller use)
|
