h****a
发帖数: 883 | 1 铺地板用得着吗？自己做个床呢？
这个deal怎么样？
http://www.amazon.com/gp/goldbox
Hitachi C10FCE2 10-Inch Compound Miter Saw |
z**r
发帖数: 17771 | 2 你又不是专业木工，用不着这样的，home depot随便买一个30左右的skill saw就行了
。如果你没有大量的木头据，买个jigsaw比较划算，也才2、30
【在 h****a 的大作中提到】
: 铺地板用得着吗？自己做个床呢？
: 这个deal怎么样？
: http://www.amazon.com/gp/goldbox
: Hitachi C10FCE2 10-Inch Compound Miter Saw
|
t*o
发帖数: 2606 | 3 据说这个东西切斜边比较有用? 听同事说的.具体我也不懂.
另外 jigsaw 和 reciprocal saw 哪个更常用啊? |
C*******d
发帖数: 15836 | 4 I have this one. It is very convenient to cut wood. Sure will be very
helpful for 铺地板 and 做床. It is much more accurate and faster than hand
held tools, and can cut angles very easily. It won't cut long board which I
have to use circular saw or zig saw to do. I bought it with the similar
price and think it is a very good deal.
【在 h****a 的大作中提到】
: 铺地板用得着吗？自己做个床呢？
: 这个deal怎么样？
: http://www.amazon.com/gp/goldbox
: Hitachi C10FCE2 10-Inch Compound Miter Saw
|
m*******l
发帖数: 621 | 5 看review非常好，我也刚买了一个。
我的问题是
是不是还要买一个工作台来固定它呢？
还是把它放在一个桌子上不用固定就行？
I
【在 C*******d 的大作中提到】
: I have this one. It is very convenient to cut wood. Sure will be very
: helpful for 铺地板 and 做床. It is much more accurate and faster than hand
: held tools, and can cut angles very easily. It won't cut long board which I
: have to use circular saw or zig saw to do. I bought it with the similar
: price and think it is a very good deal.
|
C*******d
发帖数: 15836 | 6 For safety, efficiency and the ability to handle bigger wood in which case
you need more force to align it, you'd better fasten that on a table. I used
several screws to fasten it which is very easy to do.
【在 m*******l 的大作中提到】
: 看review非常好，我也刚买了一个。
: 我的问题是
: 是不是还要买一个工作台来固定它呢？
: 还是把它放在一个桌子上不用固定就行？
:
: I
|
h****a
发帖数: 883 | |
f********r
发帖数: 904 | 8 做地板需要，你选的这台机的缺点：不能Sliding,这会造成下线不准确和切口发焦 |
i*******d
发帖数: 1430 | 9 不是专业木工也用得着。铺地板，做床都需要。你说的那些根本不是干miter saw活的,
切口质量完全不在一个等级上。
【在 z**r 的大作中提到】
: 你又不是专业木工，用不着这样的，home depot随便买一个30左右的skill saw就行了
: 。如果你没有大量的木头据，买个jigsaw比较划算，也才2、30
|
m**********2
发帖数: 6568 | 10 absolutely essential for molding
自己做个床 depends on the design. You could have a design that is totally OK
without a mitter saw, or the opposite.
【在 h****a 的大作中提到】
: 铺地板用得着吗？自己做个床呢？
: 这个deal怎么样？
: http://www.amazon.com/gp/goldbox
: Hitachi C10FCE2 10-Inch Compound Miter Saw
|
|
|
m*******l
发帖数: 621 | 11 目前就是想用它切laminate floor。
还有就是你的工作桌是在哪里买的？
used
【在 C*******d 的大作中提到】
: For safety, efficiency and the ability to handle bigger wood in which case
: you need more force to align it, you'd better fasten that on a table. I used
: several screws to fasten it which is very easy to do.
|
m*******l
发帖数: 621 | 12 切一块地板可以凑合，
但是如果铺整个房子的地板，成百上千块地板省力指数还是蛮significant的。
我正在铺地板，纵切用了table saw，横切本来想用circuit saw，但是感觉不顺手，就
用jig saw，小批量挺好的，但是如果大批量，就显得慢了。
这样说吧，用jig saw切一块30秒，用miter saw 5秒，铺的多的话，还是蛮省时省力的。
【在 z**r 的大作中提到】
: 你又不是专业木工，用不着这样的，home depot随便买一个30左右的skill saw就行了
: 。如果你没有大量的木头据，买个jigsaw比较划算，也才2、30
|
l******e
发帖数: 12192 | 13 放地上就行了
【在 m*******l 的大作中提到】
: 目前就是想用它切laminate floor。
: 还有就是你的工作桌是在哪里买的？
:
: used
|
C*******d
发帖数: 15836 | 14 I used an old small table with wood surface to mount it. You can do the same
with any wood surfaced table.
I do have a big working bench which I made by myself with the help of my
Miter saw. But that's overly used already so I don't have space for the
Miter saw to mount.
【在 m*******l 的大作中提到】
: 目前就是想用它切laminate floor。
: 还有就是你的工作桌是在哪里买的？
:
: used
|
C*******d
发帖数: 15836 | 15 For good cut alignment and easy work to save your back, it still would be
much better to put that on a table.
【在 l******e 的大作中提到】
: 放地上就行了
|
l******e
发帖数: 12192 | 16 没关系，又不是天天做
【在 C*******d 的大作中提到】
: For good cut alignment and easy work to save your back, it still would be
: much better to put that on a table.
|
C*******d
发帖数: 15836 | 17 If you don't care, I don't care either:)
【在 l******e 的大作中提到】
: 没关系，又不是天天做
|
m***y
发帖数: 14763 | 18 //agree,
Bottom line is we should fixate the board to something like a saw horse. All
these saws can kick back, and that's like the #1 factor.
【在 C*******d 的大作中提到】
: For good cut alignment and easy work to save your back, it still would be
: much better to put that on a table.
|
m***y
发帖数: 14763 | 19 The irony is that 天天做 guys tend to use extra caution. They don't think
their experience can exempt them for injury and death. Should we less
experience guys use more caution than they do?
【在 l******e 的大作中提到】
: 没关系，又不是天天做
|
l******e
发帖数: 12192 | 20 看不懂
不过，放地上是没啥问题的
【在 m***y 的大作中提到】
: The irony is that 天天做 guys tend to use extra caution. They don't think
: their experience can exempt them for injury and death. Should we less
: experience guys use more caution than they do?
|
m*******l
发帖数: 621 | 21 "old small table with wood surface",this is exactly what I have now.
我觉得木质台面有利于吸振，会比放在地上好点。
而且稍微高点会比较顺手。
Thanks a lot!!
same
【在 C*******d 的大作中提到】
: I used an old small table with wood surface to mount it. You can do the same
: with any wood surfaced table.
: I do have a big working bench which I made by myself with the help of my
: Miter saw. But that's overly used already so I don't have space for the
: Miter saw to mount.
|
