l***e
发帖数: 480 | 1 linux is Ubuntu 12.04
好像linux的vpn可以连cisco的vpn client能连的VPN SERVER。
可是，LINUX下的vpn client的设置和Win7下的CISCO的VPN CLIENT不是一一对应的。
哪位设置成功过？给点提示？
多谢！
VPN CLIENT的版本是5.0.07.0440 |
l***e
发帖数: 480 | 2 sorry. my mistake deleted original posts. |
l***e
发帖数: 480 | 3 how to find the information for vpnc under Linux from Cisco VPN client?
【在 l***e 的大作中提到】
: sorry. my mistake deleted original posts.
|
z**r
发帖数: 17771 | 4 you need to translate the Cisco VPN profile to the vpnc config, especially
the group password. Both vpnc and Cisco VPN client are based on IPSec, it
shouldn't matter what VPN server you use as long as it supports IPSec
for Linux, I don't recommend Cisco VPN client, because it runs in kernel
mode. vpnc runs in user mode
【在 l***e 的大作中提到】
: how to find the information for vpnc under Linux from Cisco VPN client?
|
l***e
发帖数: 480 | 5 linux is Ubuntu 12.04
好像linux的vpn可以连cisco的vpn client能连的VPN SERVER。
可是，LINUX下的vpn client的设置和Win7下的CISCO的VPN CLIENT不是一一对应的。
哪位设置成功过？给点提示？
多谢！
VPN CLIENT的版本是5.0.07.0440 |
l***e
发帖数: 480 | 6 sorry. my mistake deleted original posts. |
l***e
发帖数: 480 | 7 how to find the information for vpnc under Linux from Cisco VPN client?
【在 l***e 的大作中提到】
: sorry. my mistake deleted original posts.
|
z**r
发帖数: 17771 | 8 you need to translate the Cisco VPN profile to the vpnc config, especially
the group password. Both vpnc and Cisco VPN client are based on IPSec, it
shouldn't matter what VPN server you use as long as it supports IPSec
for Linux, I don't recommend Cisco VPN client, because it runs in kernel
mode. vpnc runs in user mode
【在 l***e 的大作中提到】
: how to find the information for vpnc under Linux from Cisco VPN client?
|
l***e
发帖数: 480 | 9 where can I find the group name and password ?
thanks.
【在 z**r 的大作中提到】
: you need to translate the Cisco VPN profile to the vpnc config, especially
: the group password. Both vpnc and Cisco VPN client are based on IPSec, it
: shouldn't matter what VPN server you use as long as it supports IPSec
: for Linux, I don't recommend Cisco VPN client, because it runs in kernel
: mode. vpnc runs in user mode
|
f*******e
发帖数: 1061 | 10 I think you can import your .pcf file directly on your linux vpnc client. On
older versions of linux you may need pcf2vnpc program to do this. The newer
versions of vpnc allow you import your profile directly.
【在 l***e 的大作中提到】
: where can I find the group name and password ?
: thanks.
|
