b***p
发帖数: 2 | 1 我直接用MODEM可以上， 然后连接上ROUTER后就显示没接通。 估计是要CONFIGUR
ROUTER. 我按照ROUTER安装盘的指示做了也还是不通。试了两个ROUTER都不行。
COMCAST的CABLE
D-LINK DCM 200 的MODEM
NETGEAR的无线 ROUTER ( 另外试了TRENDNET的有线ROUTER也不行） |
w****g
发帖数: 597 | 2 How is your PC-Router connection? In your PC, can you ping 192.168.0.1 (or
your router's IP address)?
【在 b***p 的大作中提到】
: 我直接用MODEM可以上， 然后连接上ROUTER后就显示没接通。 估计是要CONFIGUR
: ROUTER. 我按照ROUTER安装盘的指示做了也还是不通。试了两个ROUTER都不行。
: COMCAST的CABLE
: D-LINK DCM 200 的MODEM
: NETGEAR的无线 ROUTER ( 另外试了TRENDNET的有线ROUTER也不行）
|
b***p
发帖数: 2 | 3 YES, i CAN PING
IT CAN SEND OUT DATA NUT CAN NOT GET DATA FROM INTERNET ( I THINK) . 3 LIGHTS
ARE ON, NUT THE INTERNET LIGHT IS BLINKING.
【在 w****g 的大作中提到】
: How is your PC-Router connection? In your PC, can you ping 192.168.0.1 (or
: your router's IP address)?
|
w****g
发帖数: 597 | 4 If your PC-Router conncetion is good, you can check router configuration. You
need read your router manual to find out how to config your router properly.
For example, you can login in router at 192.168.0.1 (or your router IP
address); then you can fill in your comcast username & password at your
router.
LIGHTS
【在 b***p 的大作中提到】
: YES, i CAN PING
: IT CAN SEND OUT DATA NUT CAN NOT GET DATA FROM INTERNET ( I THINK) . 3 LIGHTS
: ARE ON, NUT THE INTERNET LIGHT IS BLINKING.
|
