c*****v
发帖数: 1440 | 1 本人从未干过超频，第一次得不到门道，有高手能手把手教吗？
这是MC 的Budget Combo |
z*********e
发帖数: 10149 | 2 i got easy 3.73GHz with stock hsf |
c*****v
发帖数: 1440 | 3 Wow!
How to do it? ?? I just dont have clue so please help. |
z*********e
发帖数: 10149 | 4 直接把bclk 拉到270左右吧?
【在 c*****v 的大作中提到】
: Wow!
: How to do it? ?? I just dont have clue so please help.
|
c*****v
发帖数: 1440 | 5 I try to change those in ET6. But everytime i slide, click "set", computer
freeze with no response.
So you only change bus clk frequency, dont need to change ratio or other?
I will give a try again. |
c*****v
发帖数: 1440 | 6 I try to change those in ET6. But everytime i slide, click "set", computer
freeze with no response.
So you only change bus clk frequency, dont need to change ratio or other?
I will give a try again. |
I******n
发帖数: 5952 | 7 BCLK 从200拉到260你的内存吃不消的。先210，220慢慢试。再想往高了超要调节分频
把内存速度降下来。
【在 c*****v 的大作中提到】
: I try to change those in ET6. But everytime i slide, click "set", computer
: freeze with no response.
: So you only change bus clk frequency, dont need to change ratio or other?
: I will give a try again.
|
c*****v
发帖数: 1440 | 8 你是说CPU Ratio？ 我总是往高里调，老是死机 |
c*****v
发帖数: 1440 | 9 你是说CPU Ratio？ 我总是往高里调，老是死机 |
c*****v
发帖数: 1440 | 10 我只能把BCLK拉到230。到235就死。是不是把Ratio调低后再拉BCLK？
我的Ram 是 1333。是不是到顶了？ |
c*****v
发帖数: 1440 | 11 我只能把BCLK拉到230。到235就死。是不是把Ratio调低后再拉BCLK？
我的Ram 是 1333。是不是到顶了？ |
z*********e
发帖数: 10149 | 12 i have this same motherboard
go to bios, move the fsb to 260MHz, keep the HT under 2GHz, memoery clock
under 1333MHz, save config and restart |
c*****v
发帖数: 1440 | |
