L******d 发帖数: 2461 | 1 首先, 如果你满怀对未知的美好希望刷机, 开机后却只显示PBO logo, nothing else,
USB灯也不亮(没有读盘), 恭喜你,你的PBO变砖了.
据说这时候要么RMA寄回厂家, 要么拿出USB-TTL线. 如果你不幸象我一样手边还没有
USB-TTL线, 别急, 还可以试试SW3大法.
SW3大法就是Reset. 一些高清硬盘播放机有一个reset孔, 按后会让刷机失败的播放机
重新自动刷机.问题是PBO没有这个孔. 好在有人研究了, 发现PBO外壳上不带这个孔,
内部还是有的. 就是电路板上的SW3. 只要把壳剥开, 把SW3与ground/地线之间短路,
就相当于按了一次reset.
1. 你需要一根导线:
2.
3.Road map
You will be inserting the wire into hole "A", while hole "B" is where you
will be using your eyes to look for SW3. Plug a flash drive with firmware (
preferably P02) into the front USB port. Ensure the power cord is plugged in.
4.
Turn the switch on the back of the PBO to "POWER", while ensuring:
A) The wire is touching the metal casing, in order to ground the switch.
B) The wire is also touching the SW3 solder point farthest to you, AND ONLY
that point!
The firmware should start loading in 5-15 seconds. When the firmware starts
installing (USB starts flashing, if you have a light on your USB drive),
pull the wire out as quickly as you can, without touching any other areas on
the board.
http://patriot-box-office.wikidot.com/forum/t-332618 | l*******e 发帖数: 3584 | | R*y 发帖数: 994 | 3 有TTL线的路过支持一下. 现在用PBO, 搜狐和奇异非常给力, 速度快而且清晰. | g***i 发帖数: 4272 | | P***a 发帖数: 4213 | 5 这不是有硬盘tray嘛,假如装了硬盘就该热了
【在 g***i 的大作中提到】 : 为啥有个风扇,这东西里边有啥发热的东西?
| l*****7 发帖数: 1125 | 6 没硬盘是不是就可以吧风扇去掉?还是有点噪音啊
楼上江北哪里?
【在 P***a 的大作中提到】 : 这不是有硬盘tray嘛,假如装了硬盘就该热了
|
|