l*******e 发帖数: 3584 | 1 找不到详细功略,有谁给解释一下吗?特别是通用固件的长处是什么。
我的是23,安装了P61-Beta Megapack,自己按网上改了改这改了改那儿
包子等。 | p***A 发帖数: 607 | 2 Nothing special.
I had BC 23, then I downloaded to BC 18, did not work for 1.43, then
download to BC 16. Did not like 1.43 on it since it erases all rss I added. (now I know how to keep the new rss), and doe snot have xlive.. mega feeds..etc
Then I upgraded to BC 27, with P61-Beta Megapack, plus additional rss change
.. So far so good.
I felt that the higher BC code, less bug, better compatibility for codecs...
And I do not have buffer issue as people mentioned. Maybe just because of the ISP difference. | T****n 发帖数: 6187 | 3 迅雷啊,web控制台啊,起码不用连开个ftp都要到linux里面 | l*******e 发帖数: 3584 | 4 是不是说CODE为23的无论如何也没有办法用通用固件,
不过正好问一下,这个CODE相当于什么?我觉得PBO是一个小计算机,我们刷的固件是
操作系统,那CODE是不是就是BIOS?
added. (now I know how to keep the new rss), and doe snot have xlive..
mega feeds..etc
change
codecs...
of the ISP difference.
【在 p***A 的大作中提到】 : Nothing special. : I had BC 23, then I downloaded to BC 18, did not work for 1.43, then : download to BC 16. Did not like 1.43 on it since it erases all rss I added. (now I know how to keep the new rss), and doe snot have xlive.. mega feeds..etc : Then I upgraded to BC 27, with P61-Beta Megapack, plus additional rss change : .. So far so good. : I felt that the higher BC code, less bug, better compatibility for codecs... : And I do not have buffer issue as people mentioned. Maybe just because of the ISP difference.
| p***A 发帖数: 607 | 5 It sounds like windows MBR
The Bootcode
The bootcode is a classical linux starting system composed of the kernel and
an initial ramdisk. This bootcode can be launched by several methods
including floppy disk, bootable CD, lilo, grub.
What will the bootcode do after loading the kernel?
1. It will first try to find the memory installation file on local CDs,
then start Womp in memory
2. If it did not found memory installation on local CDs, it will look for
a loopback or memory install on local drives, then start Womp either using
the loopback or in memory depending of what it has found (if both files are
present it will start the loopback).
3. If it fails to find any installation files, it will inform you an give
you the only choice of rebooting! | l*******e 发帖数: 3584 | 6 没有太明白,进到LINUX里有什么不同吗?
【在 T****n 的大作中提到】 : 迅雷啊,web控制台啊,起码不用连开个ftp都要到linux里面
| l*******e 发帖数: 3584 | 7 Thank you for the detail, I am prepare steamed bun to you and TheSun.
But I did not get the answer for me opening question yet, especially
some link of how to connect the UBS-TTl to PC with com port. I hope to
know the number sequence for PBO.
kernel and
CDs,
look for
using
【在 p***A 的大作中提到】 : It sounds like windows MBR : The Bootcode : The bootcode is a classical linux starting system composed of the kernel and : an initial ramdisk. This bootcode can be launched by several methods : including floppy disk, bootable CD, lilo, grub. : What will the bootcode do after loading the kernel? : 1. It will first try to find the memory installation file on local CDs, : then start Womp in memory : 2. If it did not found memory installation on local CDs, it will look for : a loopback or memory install on local drives, then start Womp either using
| T****n 发帖数: 6187 | 8 就是用Windows和dos的区别。
【在 l*******e 的大作中提到】 : 没有太明白,进到LINUX里有什么不同吗?
| l*******e 发帖数: 3584 | 9 吐着吐着也就习惯了。
而且从就小用命令行,现在只不过有些懒了罢了。
【在 T****n 的大作中提到】 : 就是用Windows和dos的区别。
| p***A 发帖数: 607 | 10 I used CA 42 cable, I felt this is the easier way.
following "PBO Bootcode Update (TFTPD/LAN Free) Under $6 and Under 666
Seconds"
http://www.patriotmemory.org/forums/showthread.php?t=3479
or you could use
Bootcode update in about 10 seconds or less (step-by-step process)
http://www.patriotmemory.org/forums/showthread.php?t=3060
Good luck! |
|