e***s 发帖数: 1397 | 1 CZ455 has 11mm dovetail - not only the width is slightly different than the
common 3/8", more importantly, the angle is 60 not the 45 as most standard
American dovetails.
So what are you guys's scope setup? Just buy an 11mm dovetail base?
I am thinking about getting a 11mm-3/8" or 11mm-weaver adapter then mount
the scope base and ring onto the adapter - this way, I can keep my scope
setups universal - for future potential swapping around between different
rifles ... What do you guys think about this idea? Any downside - except the
rifle is slightly heavier and the scope is slightly higher due to this
additional adapter... only by about 1/8".
All comments and suggestions are welcome. Thanks! |
F*****t 发帖数: 1138 | 2 俺买的是这个,11mm,3/8 通用。价钱也不贵。
http://www.bkltech.com/BKL-6-Long-Dovetail-Rings-p/bkl-257.htm
the
the
【在 e***s 的大作中提到】 : CZ455 has 11mm dovetail - not only the width is slightly different than the : common 3/8", more importantly, the angle is 60 not the 45 as most standard : American dovetails. : So what are you guys's scope setup? Just buy an 11mm dovetail base? : I am thinking about getting a 11mm-3/8" or 11mm-weaver adapter then mount : the scope base and ring onto the adapter - this way, I can keep my scope : setups universal - for future potential swapping around between different : rifles ... What do you guys think about this idea? Any downside - except the : rifle is slightly heavier and the scope is slightly higher due to this : additional adapter... only by about 1/8".
|
f*********n 发帖数: 11154 | 3 I personally prefer to keep set ups fit for each gun. |
f********r 发帖数: 3155 | 4 不错。我正想把22上的BKL的镜环换成25 MOA的皮轨,打三百码也不用hold over。枪多
镜子多时经常想换个镜子试试,这样连镜子带环一起换最方便
the
the
【在 e***s 的大作中提到】 : CZ455 has 11mm dovetail - not only the width is slightly different than the : common 3/8", more importantly, the angle is 60 not the 45 as most standard : American dovetails. : So what are you guys's scope setup? Just buy an 11mm dovetail base? : I am thinking about getting a 11mm-3/8" or 11mm-weaver adapter then mount : the scope base and ring onto the adapter - this way, I can keep my scope : setups universal - for future potential swapping around between different : rifles ... What do you guys think about this idea? Any downside - except the : rifle is slightly heavier and the scope is slightly higher due to this : additional adapter... only by about 1/8".
|
e***s 发帖数: 1397 | 5 ehn.... I am afraid 3/8" and 11m are not exqactly the same ... check this
out:
http://www.rimfirecentral.com/forums/showthread.php?p=2514423
【在 F*****t 的大作中提到】 : 俺买的是这个,11mm,3/8 通用。价钱也不贵。 : http://www.bkltech.com/BKL-6-Long-Dovetail-Rings-p/bkl-257.htm : : the : the
|
e***s 发帖数: 1397 | 6 I do, too.
But the adapter setup I proposed does not negate that intention - only
provides more option if one day you do choose to move the optics to another
rifle ...
【在 f*********n 的大作中提到】 : I personally prefer to keep set ups fit for each gun.
|
F*****t 发帖数: 1138 | 7 是不一样的,但bkl这款scope mount是两边同时收缩压紧,号称中心不变。俺在网上看
也有不少人用这个,拿到手看做工也不错。
【在 e***s 的大作中提到】 : ehn.... I am afraid 3/8" and 11m are not exqactly the same ... check this : out: : http://www.rimfirecentral.com/forums/showthread.php?p=2514423
|
e***s 发帖数: 1397 | 8 宽度倒是次要,关键是一个60度,一个是45度...
【在 F*****t 的大作中提到】 : 是不一样的,但bkl这款scope mount是两边同时收缩压紧,号称中心不变。俺在网上看 : 也有不少人用这个,拿到手看做工也不错。
|