s****r 发帖数: 31686 | 1 二战的军用栓动步枪, 好像都是木头枪托一直延伸到很靠近枪口的地方, 枪管和木托
之间还有若干链接, 这样的枪管, 应该不是浮动了吧? 为啥这么设计? 优劣点有
那些? |
x*7 发帖数: 11281 | |
C*******r 发帖数: 10345 | 3 方便上了刺刀当长矛。不让,枪管打烫了,手没地方抓。 |
s****r 发帖数: 31686 | 4 没有, 终于找到点时间看了那个杂志, 有好多老枪广告, 什么K98, 确实很漂亮,
但是也生出这个疑问
【在 x*7 的大作中提到】 : 还是在看mosin nagant吗?
|
s****r 发帖数: 31686 | 5 喔? 呵呵, 有一定道理
【在 C*******r 的大作中提到】 : 方便上了刺刀当长矛。不让,枪管打烫了,手没地方抓。
|
x*7 发帖数: 11281 | 6 那个漂亮的K98是南加一个枪匠翻新的
价钱狠贵呀。
MosinMN91/30 的枪管按照当初的设计,前护木只有
最前端和枪管紧密卡在一起,其他地方,
还是浮动的,没有什么接触,不过时间
久了,很多护木歪了,变形就非浮动了。
,
【在 s****r 的大作中提到】 : 没有, 终于找到点时间看了那个杂志, 有好多老枪广告, 什么K98, 确实很漂亮, : 但是也生出这个疑问
|
s****r 发帖数: 31686 | 7 确实价格贵,但是看着确实漂亮
【在 x*7 的大作中提到】 : 那个漂亮的K98是南加一个枪匠翻新的 : 价钱狠贵呀。 : MosinMN91/30 的枪管按照当初的设计,前护木只有 : 最前端和枪管紧密卡在一起,其他地方, : 还是浮动的,没有什么接触,不过时间 : 久了,很多护木歪了,变形就非浮动了。 : : ,
|
S**********s 发帖数: 4534 | 8 不一定非要悬浮枪管才能保持精度
另一种方法是让护木均匀的紧贴枪管和action, 也就是glass bedding. 这两种做法可
以算是两个极端。
Mosin那种做法不是为了追求精度, 因为当时人们还不了解枪管harmonics这些说道。 |
s****r 发帖数: 31686 | 9 二战的时候, 还不会用树脂做bEDDING吧?
【在 S**********s 的大作中提到】 : 不一定非要悬浮枪管才能保持精度 : 另一种方法是让护木均匀的紧贴枪管和action, 也就是glass bedding. 这两种做法可 : 以算是两个极端。 : Mosin那种做法不是为了追求精度, 因为当时人们还不了解枪管harmonics这些说道。
|
S**********s 发帖数: 4534 | 10 树脂出现之前都是用一块金属, 也就是bedding block, 卡在action后面。
【在 s****r 的大作中提到】 : 二战的时候, 还不会用树脂做bEDDING吧?
|
|
|
k**0 发帖数: 19737 | 11 就拿98K和李因飞来说,其实你拆开来看,除了枪膛和前方barrel band那两点,其它地
方的木托都不接触枪管, 所以两者都是浮动枪管。
更早的GEW1888式,就是老套筒汉阳造,也是浮动枪管的设计,那个套筒就是为了这个
设计的。
【在 s****r 的大作中提到】 : 二战的军用栓动步枪, 好像都是木头枪托一直延伸到很靠近枪口的地方, 枪管和木托 : 之间还有若干链接, 这样的枪管, 应该不是浮动了吧? 为啥这么设计? 优劣点有 : 那些?
|
S**********s 发帖数: 4534 | 12 我觉得那不能算。 浮动枪管的目的就是让枪管在射击时的"whipping motion"不受干扰
,
barrel band正好否决了这一可能。
【在 k**0 的大作中提到】 : 就拿98K和李因飞来说,其实你拆开来看,除了枪膛和前方barrel band那两点,其它地 : 方的木托都不接触枪管, 所以两者都是浮动枪管。 : 更早的GEW1888式,就是老套筒汉阳造,也是浮动枪管的设计,那个套筒就是为了这个 : 设计的。
|
T*R 发帖数: 25894 | |
k**0 发帖数: 19737 | 14 和M16类似, 只有枪膛到最前面的barrel band当中那一段算是floating。浮动枪管的
目的是让枪管可以在射击后回到原位。很多枪支的free float都是这种设计,特别是靠
气体推进来运作的自动武器。
【在 S**********s 的大作中提到】 : 我觉得那不能算。 浮动枪管的目的就是让枪管在射击时的"whipping motion"不受干扰 : , : barrel band正好否决了这一可能。
|
k**0 发帖数: 19737 | |
S**********s 发帖数: 4534 | 16 Can't agree with that.
If that count as free float, then M14 is also free float, hell, even 1911s
will be free float.
This is a perfect example of free floating barrel. Nothing touches the
barrel, period.
This is another perfect example of free floating barrel
A folded dollar bill can be slided all the way down to the bore to confirm
that there's is space between the stock and barrel. The stock also has to be
rigid enough so that the weight of the gun will not bend the forearm to
touch the barrel.
the so called "free float" inside of a handguard does NOTHING.
【在 k**0 的大作中提到】 : 和M16类似, 只有枪膛到最前面的barrel band当中那一段算是floating。浮动枪管的 : 目的是让枪管可以在射击后回到原位。很多枪支的free float都是这种设计,特别是靠 : 气体推进来运作的自动武器。
|
k**0 发帖数: 19737 | 17 这个free floating也不是我defined的。现代自动武器,除了blow back,前面哪有不碰
枪管的。
A free-floating barrel is one in which the barrel and stock are designed to
not touch at any point along the barrel's length. The barrel is attached to
its receiver, which is attached to the stock, but the barrel "floats freely"
without any contact with other gun parts, other than the rifle's sights.
This minimizes the variance in possible mechanical pressure distortions of
the barrel alignment, and allows vibration to occur at the natural frequency.
如果目的是minimize distortions of the barrel alignment,在没有选择的情况下,
两点contact总好过full contact. 二战bolt action步枪设计中包括使用刺刀,不是
full floating不奇怪。
be
【在 S**********s 的大作中提到】 : Can't agree with that. : If that count as free float, then M14 is also free float, hell, even 1911s : will be free float. : This is a perfect example of free floating barrel. Nothing touches the : barrel, period. : This is another perfect example of free floating barrel : A folded dollar bill can be slided all the way down to the bore to confirm : that there's is space between the stock and barrel. The stock also has to be : rigid enough so that the weight of the gun will not bend the forearm to : touch the barrel.
|
T*R 发帖数: 25894 | 18 I remember the barrel on my No.4 doesn't touch the hand guard at all, but I
could be wrong. No.5 is definitely not touching at all, because there is no
hand guard near the muzzle.
【在 k**0 的大作中提到】 : http://www.youtube.com/watch?v=i7SF7ExcwRw
|
k**0 发帖数: 19737 | 19 你买了丛林版啊!羡慕,当初AIM一出来就没了,现在买不到了。
I
no
【在 T*R 的大作中提到】 : I remember the barrel on my No.4 doesn't touch the hand guard at all, but I : could be wrong. No.5 is definitely not touching at all, because there is no : hand guard near the muzzle.
|
T*R 发帖数: 25894 | 20 从century买了个action+barrel,然后到处买零件凑了一个,价钱不低,价值没有,呵
呵。
【在 k**0 的大作中提到】 : 你买了丛林版啊!羡慕,当初AIM一出来就没了,现在买不到了。 : : I : no
|
|
|
S**********s 发帖数: 4534 | 21 枪管后座原理也可以。 导气也好解决, 因为DI AR的导气管对枪管的压力几乎是
constant, 所以只要外面套个free float tube就可以free float, 两脚架, 沙包和
手不管怎么碰, 压力都是free float tube承受着, 不碰枪管
反过来普通handguard就不行。
【在 k**0 的大作中提到】 : 这个free floating也不是我defined的。现代自动武器,除了blow back,前面哪有不碰 : 枪管的。 : A free-floating barrel is one in which the barrel and stock are designed to : not touch at any point along the barrel's length. The barrel is attached to : its receiver, which is attached to the stock, but the barrel "floats freely" : without any contact with other gun parts, other than the rifle's sights. : This minimizes the variance in possible mechanical pressure distortions of : the barrel alignment, and allows vibration to occur at the natural frequency. : 如果目的是minimize distortions of the barrel alignment,在没有选择的情况下, : 两点contact总好过full contact. 二战bolt action步枪设计中包括使用刺刀,不是
|
k**0 发帖数: 19737 | 22 虽然这样解释也可以,不过说枪管完全不承重,我看不见得。
【在 S**********s 的大作中提到】 : 枪管后座原理也可以。 导气也好解决, 因为DI AR的导气管对枪管的压力几乎是 : constant, 所以只要外面套个free float tube就可以free float, 两脚架, 沙包和 : 手不管怎么碰, 压力都是free float tube承受着, 不碰枪管 : 反过来普通handguard就不行。
|
S**********s 发帖数: 4534 | 23 你这是普通护木......枪管当然承受各种外界压力
【在 k**0 的大作中提到】 : 虽然这样解释也可以,不过说枪管完全不承重,我看不见得。
|
k**0 发帖数: 19737 | 24 没啥两样啊,都是两点接触枪管 - 前面准星处和后面receiver.
即使照AR那个设计在准星那个地方上个环形口固定hand guard, hand guard上的力还是会
传到枪管上,这个设计基本上所有自动枪都是这样搞的。
真正fully floating的大概只有bolt action (就像你举的例子) 和blow back类枪支(
如M2 machine gun).
【在 S**********s 的大作中提到】 : 你这是普通护木......枪管当然承受各种外界压力
|
f****a 发帖数: 4708 | 25 handguard
【在 k**0 的大作中提到】 : 没啥两样啊,都是两点接触枪管 - 前面准星处和后面receiver. : 即使照AR那个设计在准星那个地方上个环形口固定hand guard, hand guard上的力还是会 : 传到枪管上,这个设计基本上所有自动枪都是这样搞的。 : 真正fully floating的大概只有bolt action (就像你举的例子) 和blow back类枪支( : 如M2 machine gun).
|
k**0 发帖数: 19737 | 26 这个算是full floating没错, 不过也有人说不是true free float. 前面有gas block.
【在 f****a 的大作中提到】 : handguard
|
S**********s 发帖数: 4534 | 27 OMG.
普通handguard固定在枪管上,
Free float tube完全不碰枪管, 怎么把力传递到枪管上?
free float tube以后, Gas block和gas tube也是不受力的, 所以枪管受到的力是恒
定的, 这已经达到了free float的目的。
是会
【在 k**0 的大作中提到】 : 没啥两样啊,都是两点接触枪管 - 前面准星处和后面receiver. : 即使照AR那个设计在准星那个地方上个环形口固定hand guard, hand guard上的力还是会 : 传到枪管上,这个设计基本上所有自动枪都是这样搞的。 : 真正fully floating的大概只有bolt action (就像你举的例子) 和blow back类枪支( : 如M2 machine gun).
|
k**********i 发帖数: 8706 | 28 在战斗步枪上浮动枪管没有意义,维护性差
:二战的军用栓动步枪, 好像都是木头枪托一直延伸到很靠近枪口的地方, 枪管和木托
:之间还有若干链接, 这样的枪管, 应该不是浮动了吧? 为啥这么设计? 优劣点有
:那些?
:
……
【在 s****r 的大作中提到】 : 二战的时候, 还不会用树脂做bEDDING吧?
|
S**********s 发帖数: 4534 | 29 对于当时来说是麻烦了点,现在铝合金护木满天飞,HK416, SCAR, ACR都是浮动枪管。
木托
点有
【在 k**********i 的大作中提到】 : 在战斗步枪上浮动枪管没有意义,维护性差 : : :二战的军用栓动步枪, 好像都是木头枪托一直延伸到很靠近枪口的地方, 枪管和木托 : :之间还有若干链接, 这样的枪管, 应该不是浮动了吧? 为啥这么设计? 优劣点有 : :那些? : : : ……
|
H****r 发帖数: 16240 | 30 我前几天在想一种浮动管子的AK……
当然,机匣要重新来
等哪天去咨询一下飞猪
【在 S**********s 的大作中提到】 : 对于当时来说是麻烦了点,现在铝合金护木满天飞,HK416, SCAR, ACR都是浮动枪管。 : : 木托 : 点有
|