a***a 发帖数: 8941 | 1 DA没敢测,因为扳机秤的最大量程就是12磅。
测了SA,大概5磅4盎司,测了很多次,平均值就是在5磅4盎司左右。
HK声称的SA扳机力是4.5磅。不过貌似各家的扳机力的标称值都有水分 |
a***a 发帖数: 8941 | 2 想起Glock声称的扳机力是5磅吧?如果是真的,那岂不是比P30的SA扳机力还要小?
外加P30的pre-travel,扳机行程,都比Glock长。
Glock都可以没保险携带,那P30岂不是可以cock状态携带了?
(纯学术讨论,请勿拍砖,外加请勿照此行事。如果万一走火,本人不负法律责任,呵
呵。。。。。。) |
a***a 发帖数: 8941 | 3 我怀疑Glock的扳机力其实也不止5磅,不过我手上没有Glock,没法测量。
但是Glock有aftermarket的套件,可以把扳机力改到3.5磅,我靠,要是这么轻的扳机
,那得多危险啊? |
b*****e 发帖数: 5133 | 4 新枪紧些吧,打个几百发松松筋骨再测一下。
Glock新枪额定扳机力是5.5磅。
这些都不是1911笔直扣的扳机,在扳机底部扣用力肯定比在中间扣更省力些。 |
h*********2 发帖数: 2508 | 5 我把我的P30L主簧给换了,就用USP的就行,比原厂的轻了一磅。主要也是嫌它DA重
BTW那个压簧用的小block真难装,被我发射出去好几次
【在 a***a 的大作中提到】 : DA没敢测,因为扳机秤的最大量程就是12磅。 : 测了SA,大概5磅4盎司,测了很多次,平均值就是在5磅4盎司左右。 : HK声称的SA扳机力是4.5磅。不过貌似各家的扳机力的标称值都有水分
|
a***a 发帖数: 8941 | 6 I would rather not change the main spring in case some day I need to use it
in self defense and get me into bad situation of lawsuit
:( |
d*****h 发帖数: 1266 | 7 这个数据自己怎么测出来的?用专用的扳机力度计? 能借偶吗?
【在 a***a 的大作中提到】 : DA没敢测,因为扳机秤的最大量程就是12磅。 : 测了SA,大概5磅4盎司,测了很多次,平均值就是在5磅4盎司左右。 : HK声称的SA扳机力是4.5磅。不过貌似各家的扳机力的标称值都有水分
|
a***a 发帖数: 8941 | 8 trigger pull is not a big issue for me
My question is :
Glock都可以没保险携带,那P30岂不是可以cock状态携带了? |
b*****e 发帖数: 5133 | 9 扳机力度计中的DFBB
【在 d*****h 的大作中提到】 : 这个数据自己怎么测出来的?用专用的扳机力度计? 能借偶吗?
|
b*****e 发帖数: 5133 | 10 如果P30单动情况下的pre travel比Glock长,扳机力更重,收枪时外击锤还可以挡着,
理论上会是更安全。不过说Glock没外保险足够安全了估计是当年marketing干的。
【在 a***a 的大作中提到】 : trigger pull is not a big issue for me : My question is : : Glock都可以没保险携带,那P30岂不是可以cock状态携带了?
|
|
|
d*****h 发帖数: 1266 | 11 不想花这个钱,偶都是用曹冲称象的办法测的,不太准。
【在 b*****e 的大作中提到】 : 扳机力度计中的DFBB
|
m*****8 发帖数: 292 | 12 I am thinking about cocked with safety on like a 1911. except no grip safety
【在 a***a 的大作中提到】 : trigger pull is not a big issue for me : My question is : : Glock都可以没保险携带,那P30岂不是可以cock状态携带了?
|
a***a 发帖数: 8941 | 13 Yes, that is exactly the one I have.
【在 b*****e 的大作中提到】 : 扳机力度计中的DFBB
|
a***a 发帖数: 8941 | 14 P30 does not have MS
P30S does
safety
【在 m*****8 的大作中提到】 : I am thinking about cocked with safety on like a 1911. except no grip safety
|
a***a 发帖数: 8941 | 15 If you are in Houston, I can borrow it to you.
【在 d*****h 的大作中提到】 : 这个数据自己怎么测出来的?用专用的扳机力度计? 能借偶吗?
|
a***a 发帖数: 8941 | 16 Glock is safe or not, that is another issue.
Let's just compare a loaded Glock and a loaded and cocked:
Which one is safer for drawing and hosltering?
Which one is safer when carried inside a holster?
【在 b*****e 的大作中提到】 : 如果P30单动情况下的pre travel比Glock长,扳机力更重,收枪时外击锤还可以挡着, : 理论上会是更安全。不过说Glock没外保险足够安全了估计是当年marketing干的。
|
m*****8 发帖数: 292 | 17 kakaka, that's why I went for P30S
【在 a***a 的大作中提到】 : P30 does not have MS : P30S does : : safety
|
a***a 发帖数: 8941 | 18 hoho, and that is also why I did not go for P30s
【在 m*****8 的大作中提到】 : kakaka, that's why I went for P30S
|
a***a 发帖数: 8941 | 19 Ask a question:
In P30s, when the safety is on, how does your trigger feel?
Is the trigger just blocked and you cannot move it,
or,
the trigger is just loose, and the sear is not engaged?
【在 m*****8 的大作中提到】 : kakaka, that's why I went for P30S
|
b*****e 发帖数: 5133 | 20 blocked
【在 a***a 的大作中提到】 : Ask a question: : In P30s, when the safety is on, how does your trigger feel? : Is the trigger just blocked and you cannot move it, : or, : the trigger is just loose, and the sear is not engaged?
|
|
|
H******S 发帖数: 6011 | 21 Did you get your visa already? If not, one more reason that you come to
Houston. LOL
【在 d*****h 的大作中提到】 : 这个数据自己怎么测出来的?用专用的扳机力度计? 能借偶吗?
|
a***a 发帖数: 8941 | |
b*****e 发帖数: 5133 | 23 你那个笑了很久的也换换吧。
【在 a***a 的大作中提到】 : 碧波又换头像了
|
a***a 发帖数: 8941 | 24 没找到合适的,找到了再换
【在 b*****e 的大作中提到】 : 你那个笑了很久的也换换吧。
|
a***a 发帖数: 8941 | 25 I practiced DA of P30 for a couple of days, and I think I got used to it.
Last night, when I go back to my Ruger LCR revolver, I found its trigger
pull is really lighter/shorter/smoother than the DA pull of P30.
So, P30 is even safer than a revolver ............ lol~~~~ |