A*****i 发帖数: 465 | 1 今天逛一个枪店发现一把P229 双动,觉得这个玩意构思不错,而且也是certified pre
-own,就出了手。。。
照相机效果不好 (被小孩玩坏了。。。),凑合看看吧。 |
m****s 发帖数: 10867 | |
A*****i 发帖数: 465 | 3 SIG released an altered version of the double-action only (DAO) pistols
called the DAK (for Double Action Kellerman, after the designer of the
system).When firing the pistol the first trigger pull is 6.5 lbf (compared
to 10 pounds for the standard DAO). After the pistol fires and the trigger
is released forward, the trigger has an intermediate reset point that is
approximately halfway to the trigger at rest position. The trigger pull from
this intermediate reset point is 8.5 lbf (38 N). If the t |
f*********n 发帖数: 11154 | |
L*******r 发帖数: 8961 | |
s***d 发帖数: 973 | |
f*********n 发帖数: 11154 | 7 俺的P239一直不错,不过最近上膛的时候偶尔出现卡壳,不知道LZ的229有没有遇到过
?就是打完一发子弹都退壳正常,但是下一发上膛的时候偶尔会卡住一半,slide没有
完全合住。 |
A*****i 发帖数: 465 | 8 pre-tax 470. 买回来才发现带night sight, 算是个小小惊喜。。。
【在 s***d 的大作中提到】 : How much?
|
A*****i 发帖数: 465 | 9 grip也customize了,当时真的没注意到。。。hogue的,省却我一道工序。。。
【在 A*****i 的大作中提到】 : pre-tax 470. 买回来才发现带night sight, 算是个小小惊喜。。。
|
q**u 发帖数: 12289 | 10 很不错的价钱啊
【在 A*****i 的大作中提到】 : pre-tax 470. 买回来才发现带night sight, 算是个小小惊喜。。。
|
A*****i 发帖数: 465 | 11 我这个周末去打了2盒子弹,一盒PMC FMJ 一盒Rem FMJ Encap, 没出现啥问题,算是放
下心里的一块石头。
听你的描述,会不会是feeding的问题?如果你用的子弹不是圆头FMJ的话,可以试试?
因为round nose FMJ feeding应该是最容易的。
我没有玩过239, 纯属瞎猜。。。
【在 f*********n 的大作中提到】 : 俺的P239一直不错,不过最近上膛的时候偶尔出现卡壳,不知道LZ的229有没有遇到过 : ?就是打完一发子弹都退壳正常,但是下一发上膛的时候偶尔会卡住一半,slide没有 : 完全合住。
|
k*******n 发帖数: 5546 | 12 Hogue的握片看上去不错,P226更适合9mm,P229适合357SIG/40SW, 有这么一说吗? 难
道设计耐受膛压不同? |
m********n 发帖数: 802 | 13 certified pre-own 和一般二手的有什么不一样么?
多少米啊
pre
【在 A*****i 的大作中提到】 : 今天逛一个枪店发现一把P229 双动,觉得这个玩意构思不错,而且也是certified pre : -own,就出了手。。。 : 照相机效果不好 (被小孩玩坏了。。。),凑合看看吧。
|
s*********r 发帖数: 4210 | 14 original p229是设计为了357SIG/40SW。 好象是slide的制造方式不同。
【在 k*******n 的大作中提到】 : Hogue的握片看上去不错,P226更适合9mm,P229适合357SIG/40SW, 有这么一说吗? 难 : 道设计耐受膛压不同?
|