m****6
发帖数: 8689 | 1 今天想打印，结果不work了，显示墨量低。赶紧上阿妈桑买墨盒，结果发现这条review
,照做之，结果打印机又work了。供大家参考一下：
Bought this cartridge for a new Brother HL-2270DW. In less than 2 or 3
hundred pages the toner light started flashing and the printer refused to
print. I did not believe that the cartridge could possibly be out of toner,
so I searched the web and found the following instructions to reset the out
of toner condition:
===================
- Open the front cover and leave open while completing the following steps.
- Turn the printer off.
- Hold the 'go' button (or "start' button) while turning the printer on. All
panel lights should be on.
- Release the 'go' button (or "start' button).
- Press the 'go' button (or "start' button) 2 times.
- Pause. All panel lights should be on.
- Press the 'go' button (or "start' button) 5 times.
The toner light should be off. (error may be flashing)
The paper light should be on or flashing.
- Close cover. The ready light should be the only light on.
====================
The printer functioned fine after the reset. I have no idea how long the "
fix" will last.
A pox on companies that build devices like this. | e***l
发帖数: 3482 | 2 是这样的，几乎所有BROTHER打印机都有这个override特殊设置方法，否则太浪费了。
另外，用第三方的很好。AMAZON上那个LINK什么的品牌，还不错。还一个便宜的品牌，
很烂。 | a*****g
发帖数: 336 | 3 You can cover that small window on the cartridge with a paper and a tape. It
will fool the printer to think the cartridge is full :-)
review
,
out
【在 m****6 的大作中提到】
: 今天想打印，结果不work了，显示墨量低。赶紧上阿妈桑买墨盒，结果发现这条review
: ,照做之，结果打印机又work了。供大家参考一下：
: Bought this cartridge for a new Brother HL-2270DW. In less than 2 or 3
: hundred pages the toner light started flashing and the printer refused to
: print. I did not believe that the cartridge could possibly be out of toner,
: so I searched the web and found the following instructions to reset the out
: of toner condition:
: ===================
: - Open the front cover and leave open while completing the following steps.
: - Turn the printer off.
|
|
