boards

本页内容为未名空间相应帖子的节选和存档,一周内的贴子最多显示50字,超过一周显示500字 访问原贴
EmergingNetworking版 - 问一个简单的PE router的问题
相关主题
MPLS是不是依赖IP routing?
What could be the solution for the 20bit MPLS label length?
家庭网络问题请到其他版
一个面试题
现在北美都有哪些ISP已经IPv6 available了?
ordered control vs independent control (mpls)
Dynamic tunnel metric adjustment based to transport performace
Have you ever locked yourself out?
bgp-vpls vs ldp-vpls
bpg send-label question
相关话题的讨论汇总
话题: te话题: mpls话题: pe话题: bgp话题: ibgp
进入EmergingNetworking版参与讨论
1 (共1页)
s*******8
发帖数: 12734
1
ISP side,PE router上配RIPv2,MPLS,iBGP,一个口配vrf,
layer 3,就有2个routing protocol了,如果都配上,router会用哪个呢?还是不能都
配上?
Q2:我知道现实中不可能,实验环境下,如果一个boarder router,一边是rip,一边
是BGP,那么需要redistribute,如果我另一边再配一个rip,那么是不是不需要
redistribute了?
不好意思,小弟新人,问题有点傻,包涵。
s*****g
发帖数: 1055
2
If running BGP then you don't need explicitly redistribute, prefixes from CE learned by BGP will automatically be put in vpnv4 table -- the reason being you can only run one BGP process (on most platforms).
z**r
发帖数: 17771
3
你这表达的也太不清楚了,还得让人猜
你是问pe-ce是rip,pe-pe是mp-ibgp,然后之间怎么相互工作?

【在 s*******8 的大作中提到】
: ISP side,PE router上配RIPv2,MPLS,iBGP,一个口配vrf,
: layer 3,就有2个routing protocol了,如果都配上,router会用哪个呢?还是不能都
: 配上?
: Q2:我知道现实中不可能,实验环境下,如果一个boarder router,一边是rip,一边
: 是BGP,那么需要redistribute,如果我另一边再配一个rip,那么是不是不需要
: redistribute了?
: 不好意思,小弟新人,问题有点傻,包涵。

s*******8
发帖数: 12734
4
是pe-ce rip, pe-pe又有rip,又有mpls,还有ibgp,
我觉得pe-pe不需要rip了,如果有rip,干嘛还要ibgp,
如果rip和ibgp都在,那router怎么知道layer3用哪一个?再者,pe-router这个时候,
还需要redistribute么?

【在 z**r 的大作中提到】
: 你这表达的也太不清楚了,还得让人猜
: 你是问pe-ce是rip,pe-pe是mp-ibgp,然后之间怎么相互工作?

s*****g
发帖数: 1055
5
I don't know what you are talking about.

【在 s*******8 的大作中提到】
: 是pe-ce rip, pe-pe又有rip,又有mpls,还有ibgp,
: 我觉得pe-pe不需要rip了,如果有rip,干嘛还要ibgp,
: 如果rip和ibgp都在,那router怎么知道layer3用哪一个?再者,pe-router这个时候,
: 还需要redistribute么?

c*****i
发帖数: 631
6
pe-pe的rip是igp。 ibgp是mp-ibgp,传mpls vpn route/ lable用的。当然如果你有
full mesh的ipv ibgp,就不需要rip的。
话说mpls support rip as igp吗。
上次还被人问了个TE需不需要mpls,汗阿。

【在 s*******8 的大作中提到】
: 是pe-ce rip, pe-pe又有rip,又有mpls,还有ibgp,
: 我觉得pe-pe不需要rip了,如果有rip,干嘛还要ibgp,
: 如果rip和ibgp都在,那router怎么知道layer3用哪一个?再者,pe-router这个时候,
: 还需要redistribute么?

z**r
发帖数: 17771
7
mpls不在乎是什么routing protocol啊,只是如果你需要做TE,那么得是link state
IGP。
TE的确可以不要MPLS在core里跑,只要做full meshed PE-PE TE tunnels,就可以,当
然PE上还是要enable mpls的

【在 c*****i 的大作中提到】
: pe-pe的rip是igp。 ibgp是mp-ibgp,传mpls vpn route/ lable用的。当然如果你有
: full mesh的ipv ibgp,就不需要rip的。
: 话说mpls support rip as igp吗。
: 上次还被人问了个TE需不需要mpls,汗阿。

s*****g
发帖数: 1055
8
Come on guys ... you always need IGP full-mesh iBGP or not, think about it,
iBGP relies on TCP, without IGP, how do you route BGP's TCP taffic?
"TE需不需要mpls", what kind of question is that?

【在 c*****i 的大作中提到】
: pe-pe的rip是igp。 ibgp是mp-ibgp,传mpls vpn route/ lable用的。当然如果你有
: full mesh的ipv ibgp,就不需要rip的。
: 话说mpls support rip as igp吗。
: 上次还被人问了个TE需不需要mpls,汗阿。

z**r
发帖数: 17771
9
楼上chongqi已经解释的很清楚了。如果rip和ibgp都在同一个FIB里,当然是要选择rip
了,根据admistrator distance来判断。rip是120,ibgp是200.不过你的case不是这样
,建议看一下基本的mpls l3vpn的概念

【在 s*******8 的大作中提到】
: 是pe-ce rip, pe-pe又有rip,又有mpls,还有ibgp,
: 我觉得pe-pe不需要rip了,如果有rip,干嘛还要ibgp,
: 如果rip和ibgp都在,那router怎么知道layer3用哪一个?再者,pe-router这个时候,
: 还需要redistribute么?

c*****i
发帖数: 631
10
我说的full-mesh ibgp是说core里面所有router都跑ibgp,不是说pe之间的full mesh。
"TE需不需要mpls"是问如果你要在一个core里面setup te,你需要config mpls吗。

,

【在 s*****g 的大作中提到】
: Come on guys ... you always need IGP full-mesh iBGP or not, think about it,
: iBGP relies on TCP, without IGP, how do you route BGP's TCP taffic?
: "TE需不需要mpls", what kind of question is that?

相关主题
一个面试题
现在北美都有哪些ISP已经IPv6 available了?
ordered control vs independent control (mpls)
Dynamic tunnel metric adjustment based to transport performace
进入EmergingNetworking版参与讨论
c*****i
发帖数: 631
11
hehe,平时做test的时候都是ospf,mpls,te,这样一层层配上去的,没想那么多.

【在 z**r 的大作中提到】
: mpls不在乎是什么routing protocol啊,只是如果你需要做TE,那么得是link state
: IGP。
: TE的确可以不要MPLS在core里跑,只要做full meshed PE-PE TE tunnels,就可以,当
: 然PE上还是要enable mpls的

f*******8
发帖数: 3612
12

,
问个问题,
iBGP router的作用是不是就是为了做distribution layer的default gateways?
ISP里根据什么需要选择一个router做iBGP?

【在 s*****g 的大作中提到】
: Come on guys ... you always need IGP full-mesh iBGP or not, think about it,
: iBGP relies on TCP, without IGP, how do you route BGP's TCP taffic?
: "TE需不需要mpls", what kind of question is that?

s*****g
发帖数: 1055
13
So you are saying that if all core routers are running iBGP full mesh, then
you don't need IGP? Then we are talking about the same thing, and I am
telling you that you are wrong. ;-)
Of course you need to configure MPLS in the core (define configure MPLS?), TE can establish the LSP you want, but you still need MPLS functionality to switch the labeled packets.
Guys, guys, networking 102

mesh。

【在 c*****i 的大作中提到】
: 我说的full-mesh ibgp是说core里面所有router都跑ibgp,不是说pe之间的full mesh。
: "TE需不需要mpls"是问如果你要在一个core里面setup te,你需要config mpls吗。
:
: ,

t*******r
发帖数: 3271
14
静态路由, 哇哈哈哈哈

,

【在 s*****g 的大作中提到】
: Come on guys ... you always need IGP full-mesh iBGP or not, think about it,
: iBGP relies on TCP, without IGP, how do you route BGP's TCP taffic?
: "TE需不需要mpls", what kind of question is that?

z**r
发帖数: 17771
15

then
TE can establish the LSP you want, but you still need MPLS functionality to
switch the labeled packets.
configuring mpls means enable ldp right? if you have full meshed bi-
directonal TE tunnels for each VPN, the P routers don't have to have LDP
tuned on.
I just checked this in "mpls fundamentals", page 321, and I am posting the
content here:
TE Tunnels Between PE Routers
When two TE tunnels (one for each direction) exist between a pair of PE
routers and the Border Gateway Protocol (BGP) next hop of the vpnv4 routes
is pointing to the TE tunnels, the VRF traffic flows across the TE tunnels.
The packets have two labels: The top label is the TE label, and the bottom
label is the VPN label. If TE is enabled on all provider (P) routers but LDP
is not, all the VRF traffic must flow over the TE tunnels; otherwise, the
traffic only has the VPN label and never gets to the egress PE router. LDP
does not have to be running on the TE tunnels in this case, where the PE
routers are head end and tail end routers of the TE tunnels.

【在 s*****g 的大作中提到】
: So you are saying that if all core routers are running iBGP full mesh, then
: you don't need IGP? Then we are talking about the same thing, and I am
: telling you that you are wrong. ;-)
: Of course you need to configure MPLS in the core (define configure MPLS?), TE can establish the LSP you want, but you still need MPLS functionality to switch the labeled packets.
: Guys, guys, networking 102
:
: mesh。

s*******8
发帖数: 12734
16
最佳回答。

【在 c*****i 的大作中提到】
: pe-pe的rip是igp。 ibgp是mp-ibgp,传mpls vpn route/ lable用的。当然如果你有
: full mesh的ipv ibgp,就不需要rip的。
: 话说mpls support rip as igp吗。
: 上次还被人问了个TE需不需要mpls,汗阿。

s*******8
发帖数: 12734
17
你这个回答太狠了。

【在 t*******r 的大作中提到】
: 静态路由, 哇哈哈哈哈
:
: ,

s*******8
发帖数: 12734
18
总结一下,谢谢楼上的高人指点,每人我发一个包子,表示感谢。
太开心了,找到组织问问题了。我的疑惑太多了。哈哈。
f*******8
发帖数: 3612
19

同喜同喜

【在 s*******8 的大作中提到】
: 总结一下,谢谢楼上的高人指点,每人我发一个包子,表示感谢。
: 太开心了,找到组织问问题了。我的疑惑太多了。哈哈。

c*****i
发帖数: 631
20
full mesh bgp,bgp neigbour之间都是直连的,为啥要igp,你自己去试一下就知道了。
另外te是靠rsvp setup的和mpls ldp没有关系。我可以肯定的告诉你,而且有isp这样
用。

then
TE can establish the LSP you want, but you still need MPLS functionality to
switch the labeled packets.

【在 s*****g 的大作中提到】
: So you are saying that if all core routers are running iBGP full mesh, then
: you don't need IGP? Then we are talking about the same thing, and I am
: telling you that you are wrong. ;-)
: Of course you need to configure MPLS in the core (define configure MPLS?), TE can establish the LSP you want, but you still need MPLS functionality to switch the labeled packets.
: Guys, guys, networking 102
:
: mesh。

相关主题
Have you ever locked yourself out?
bgp-vpls vs ldp-vpls
bpg send-label question
iBGP fully meshed?
进入EmergingNetworking版参与讨论
c*****i
发帖数: 631
21
而且te不光是给mpsl vpn用的啊,还有很多别的用途。

to

【在 z**r 的大作中提到】
:
: then
: TE can establish the LSP you want, but you still need MPLS functionality to
: switch the labeled packets.
: configuring mpls means enable ldp right? if you have full meshed bi-
: directonal TE tunnels for each VPN, the P routers don't have to have LDP
: tuned on.
: I just checked this in "mpls fundamentals", page 321, and I am posting the
: content here:
: TE Tunnels Between PE Routers

z**r
发帖数: 17771
22
LDP doesn't generate labels for BGP table, I think you need BGP-send-label
instead of LDP

了。
to

【在 c*****i 的大作中提到】
: full mesh bgp,bgp neigbour之间都是直连的,为啥要igp,你自己去试一下就知道了。
: 另外te是靠rsvp setup的和mpls ldp没有关系。我可以肯定的告诉你,而且有isp这样
: 用。
:
: then
: TE can establish the LSP you want, but you still need MPLS functionality to
: switch the labeled packets.

z**r
发帖数: 17771
23
是,俺就是放了一个例子

【在 c*****i 的大作中提到】
: 而且te不光是给mpsl vpn用的啊,还有很多别的用途。
:
: to

c*****i
发帖数: 631
24
en, sorts like inter-as case

【在 z**r 的大作中提到】
: LDP doesn't generate labels for BGP table, I think you need BGP-send-label
: instead of LDP
:
: 了。
: to

s*****g
发帖数: 1055
25
BGP send-label is specifically designed for inter-AS MPLS VPN case, not used
for MPLS label distribution for general MPLS LSP establishment purpose, LDP
can advertise BGP routes if it is configured to do so, but ... but .... are
you guys talking about basic networking principle or TAI(2)GANG(4) ing?
z**r
发帖数: 17771
26
不是抬杠拉,咱们这里讨论气氛一直都很好的。实际中的网络有时候经常不按照常理出
牌,每个网络都遵循基本规则/原理,但是也都有相对特殊之处。
大家都知道bgp send-label是干嘛的,只是在这个特殊情况下,的确可以用这个来解决
chongqi提出的这个假设。
请教下LDP怎么才能generate/distribute BGP prefixes?

used
LDP
are

【在 s*****g 的大作中提到】
: BGP send-label is specifically designed for inter-AS MPLS VPN case, not used
: for MPLS label distribution for general MPLS LSP establishment purpose, LDP
: can advertise BGP routes if it is configured to do so, but ... but .... are
: you guys talking about basic networking principle or TAI(2)GANG(4) ing?

m********d
发帖数: 188
27

zher说了,问得不清楚。能问好(副词)对网络工程师可是个挑战。

【在 s*******8 的大作中提到】
: ISP side,PE router上配RIPv2,MPLS,iBGP,一个口配vrf,
: layer 3,就有2个routing protocol了,如果都配上,router会用哪个呢?还是不能都
: 配上?
: Q2:我知道现实中不可能,实验环境下,如果一个boarder router,一边是rip,一边
: 是BGP,那么需要redistribute,如果我另一边再配一个rip,那么是不是不需要
: redistribute了?
: 不好意思,小弟新人,问题有点傻,包涵。

1 (共1页)
进入EmergingNetworking版参与讨论
相关主题
bpg send-label question
iBGP fully meshed?
问个MPLS的问题。
BGP Discontiguous AS
BGP 多线切换问题。。。
inter-as l2vpn
junos/junosE HA: GR/NSR, BFD with GR/NSR
iBGP也马上可以作pe-ce routing protocol了
cspf+IGP可以独立工作吗?
再请问大侠一个PE router的问题。
相关话题的讨论汇总
话题: te话题: mpls话题: pe话题: bgp话题: ibgp