l***y 发帖数: 791 | 1 Device is running on transparent mode, and "get interface all" only shows '
trust', 'untrust' interfaces plus the virtual ones.
I want to utilize ethernet2 port and ethernet3 port. Are they auto-disabled
once the device is put to transparent mode?
P.S: this only happens with 5gt model, apparently. Other models do not have
this problem. | c*a 发帖数: 806 | 2 这里怎么变成JTAC了
没在5gt上run transparent mode, 但是这个低端fw, 不是每个interface都可以
成为单独的manageable, 基本上是根据port mode 有几个predefined templates
几个ethernet成为一组, 这一组内的ethernet port 就变成hub了
disabled
have
【在 l***y 的大作中提到】 : Device is running on transparent mode, and "get interface all" only shows ' : trust', 'untrust' interfaces plus the virtual ones. : I want to utilize ethernet2 port and ethernet3 port. Are they auto-disabled : once the device is put to transparent mode? : P.S: this only happens with 5gt model, apparently. Other models do not have : this problem.
| l***y 发帖数: 791 | 3 sorry~~ i did open a jtac case. but this place is better because certain ppl
could be a developer for netscreen if my memory is right. :))
thanks. we might need to get another 5gt for this, which is, oh 300 bucks.
big deal in this economy. i'm just doing due diligence here. he he.
disabled
have
【在 l***y 的大作中提到】 : Device is running on transparent mode, and "get interface all" only shows ' : trust', 'untrust' interfaces plus the virtual ones. : I want to utilize ethernet2 port and ethernet3 port. Are they auto-disabled : once the device is put to transparent mode? : P.S: this only happens with 5gt model, apparently. Other models do not have : this problem.
|
|