r*******1 发帖数: 4394 | |
r******s 发帖数: 3662 | 2 mm车很可爱啊
【在 r*******1 的大作中提到】 : 买了一只没机会给它立照存档:
|
f**********e 发帖数: 1994 | |
f****i 发帖数: 20252 | 4 太黄
Pentax?
【在 f**********e 的大作中提到】 : 镜头 bokeh 不错
|
r*******1 发帖数: 4394 | 5 忘记把白平衡调回来了。后来用色彩校正反而感觉没这个好。
Canon.
【在 f****i 的大作中提到】 : 太黄 : Pentax?
|
I****9 发帖数: 5245 | |
r*******1 发帖数: 4394 | 7
谢谢。mm是什么意思?
这眼神儿,那是我们系。
【在 r******s 的大作中提到】 : mm车很可爱啊
|
V*****n 发帖数: 893 | 8 hahahahaha
【在 r*******1 的大作中提到】 : : 谢谢。mm是什么意思? : 这眼神儿,那是我们系。
|
w******x 发帖数: 4396 | 9 derailleur cables are best routed to the opposite side of the headtube, then
cross each other under the downtube. this makes the smoothest bends.
you might also want to trim down front brake housing a bit and remove that
kink at the brake end. |
r*******1 发帖数: 4394 | 10 谢谢了。
现在车不在,不知道cross under downtube 会不会 rattling? anyway,晚上回去试
一下就知道了
then
【在 w******x 的大作中提到】 : derailleur cables are best routed to the opposite side of the headtube, then : cross each other under the downtube. this makes the smoothest bends. : you might also want to trim down front brake housing a bit and remove that : kink at the brake end.
|
|
|
w******x 发帖数: 4396 | 11 this is the standard way to route derailleur cables in bike shops. you'll
have two cables next to the downtube regardless, so having a cross on the
downtube will not make it any more prone to rattle.
【在 r*******1 的大作中提到】 : 谢谢了。 : 现在车不在,不知道cross under downtube 会不会 rattling? anyway,晚上回去试 : 一下就知道了 : : then
|
V*****n 发帖数: 893 | 12 nice trick! will try that when I service the bikes.
then
【在 w******x 的大作中提到】 : derailleur cables are best routed to the opposite side of the headtube, then : cross each other under the downtube. this makes the smoothest bends. : you might also want to trim down front brake housing a bit and remove that : kink at the brake end.
|
r*******1 发帖数: 4394 | 13 今天试了试重新route cable,但是cable 会蹭downtube。
then
【在 w******x 的大作中提到】 : derailleur cables are best routed to the opposite side of the headtube, then : cross each other under the downtube. this makes the smoothest bends. : you might also want to trim down front brake housing a bit and remove that : kink at the brake end.
|
w******x 发帖数: 4396 | 14 sigh. so your frame is one of those with the cable stops mounted high to be
easy to reach. can't do the double cross routing then.
【在 r*******1 的大作中提到】 : 今天试了试重新route cable,但是cable 会蹭downtube。 : : then
|
r*******1 发帖数: 4394 | 15 i cross them anyway and put a sticker at the area.
be
【在 w******x 的大作中提到】 : sigh. so your frame is one of those with the cable stops mounted high to be : easy to reach. can't do the double cross routing then.
|
r*******1 发帖数: 4394 | 16 刚注意到前拨cable route 还挺重要的。
第一张图是正确的方法: cable over the tab (红圈所示),第二张是错误的方法。 |
s*******8 发帖数: 12734 | 17 颜色搭配挺好看的。
其实这个东西,价格还是主导因素,有些part配上去了,有些就马虎了。轮子其实还是
很重要的。这么多车都不是平衡的配105套件,肯定是有原因的。
个人意见。 |