由买买提看人间百态

boards

本页内容为未名空间相应帖子的节选和存档,一周内的贴子最多显示50字,超过一周显示500字 访问原贴
Automobile版 - sae: 2014 MDX re-engineered to pass IIHS test, reduce NVH
相关主题
性价比最高的7座SUVvolvo XC90, MDX , Buick Enclave 选哪个?
Motortrend 2014 Acura MDX SH-AWD Long-Term Verdict有人买 MB R350 么
2016年本田Civic轿车宣传资料 - 身体MDX Base or Tech
本田卡车结构 够软吗?难道就没有比VOLVO S60更靠谱的Sedan了吗?
想买个儿童安全座椅,求推荐说两句IIHS Death Rate报告
实践出真知 日本车真的不安全吗?本田你妈叫你赶快回家复习备考
国内开始认为本田安全了?世界第一15度角碰撞实验IIHS issues first crash avoidance ratings
Volvo的独门绝技被Subaru抄袭了!MDX和XC90那个更安全?
相关话题的讨论汇总
话题: mdx话题: body话题: nvh话题: side话题: honda
进入Automobile版参与讨论
1 (共1页)
M*********n
发帖数: 4839
1
The competitive marketplace would be enough of a reason for the 2014 Acura
MDX, the third generation of the seven-passenger crossover, to be built on a
new platform. But the U.S. engineering team for the Honda luxury model had
a wide range of engineering objectives, led by the commitment to meet the
small overlap barrier crash test of the IIHS (Insurance Institute for
Highway Safety). Although the MDX first was revealed in March at the New
York Auto Show http://www.sae.org/mags/aei/11962, it is just going into production at the Lincoln, AL, plant, and will be on sale in July.
All other Acura models introduced in the past year have passed the test, but
the MDX—the largest and heaviest vehicle in the lineup, with much more
crash energy to safely disperse—was a greater challenge. It required going
beyond just a later variant of the Honda light-truck platform and also
dictated a new edition of Honda's ACE (Advanced Compatibility Engineering)
approach to crash management.
Stiffener ring for door frame
On the MDX, the ACE structure includes an innovative "stiffener ring" at the
front door frame to accept and help diffuse the small overlap test energy
of a 40 mph (64 km/h) impact with a rigid barrier, such as a utility pole,
by just 25% of the driver's side frontal area.
The front bumper beam is tied into each side rail and each body side, which
includes the stiffener ring of the door frame and A-pillar so that the
energy of the small overlap impact is distributed through both rail and body
side. The stiffener ring is a tailor-welded single piece, with thicker
blanks where needed. Then the assembled part is placed in an oven heated to
940°C (1725°F), where it is formed and quenched in the hot-stamping
process, to complete it.
In addition to the energy management of the front-end and body-side design,
the front wheels also participate. They are aluminum and, unlike steel
wheels that would maintain approximate shape and be pushed back into the
cabin, they simply collapse on the impact. Mark Pafumi, Chief Engineer,
Honda R&D Americas, said its small overlap test results were so good, the
front doors still could be opened. As a result, Honda has full confidence
the MDX will get a top rating.
In a head-on collision (full frontal), the crash energy is transferred from
the bumper beam into Y-branched rails at each side and a center Y that
flares into each of them and also goes down the center of the underbody.
The MDX, at 193.6 in (4917 mm) overall, is 2.0 in (51 mm) longer than its
predecessor. But even with the new ACE structure for the safety enhancements
, weight reduction was possible. The 2014 Super-Handling All Wheel Drive
model has a mass range of 4255-4332 lb (1930-1965 kg), an average of 275 lb
(125 kg) less than the 2013 model.
The body, thanks to a 55% high-strength-steel content, contributes 123 lb (
56 kg) to the reduction. Seats are 44 lb (20 kg) lighter, front and rear
subframes and rear suspension combine to chip in with a 41 lb (18.6 kg)
saving, and the aluminum steering hanger beam was replaced by magnesium for
a 7.5 lb (3.4 kg) drop. There is also a front-drive-only edition of the MDX,
to be marketed in southern, snow-free areas as a lower priced, more fuel-
efficient alternative. It tips the scales at 4025-4103 lb (1826-1861 kg).
NVH changes throughout
Based on customer feedback, a major effort was made to lower NVH. The
increase in body stiffness of the new platform itself certainly helped, but
a lot more was done. A rigorous study of body sealing led to a two-thirds
reduction in air leakage paths through the body, noted Pafumi. The door
openings were fitted with triple sealing, which compared with double-sealing
further reduces the turbulence from air blowing in and exciting the volume
of air between doors and body, he added.
In addition, 22 custom-designed structural foam inserts are clipped on,
inside the pillars, and when the body is baked in the paint shop the foam
expands to fill. This is more efficient than foam injection, Pafumi told AEI.
Tire noise, he said, is a major issue, and it's both air and structure borne
. Improved sealing of the wheelhouse openings helped, but engineered
upgrades to stiffen the structure of the openings were even more important,
Pafumi said.
All exterior glass, he said, contains a layer of PVB (polyvinyl butyral)
acoustic material, including the windows, and in addition, the glass panels
are thicker.
Active noise control is used, but the MDX also incorporates a number of
components to reduce powertrain- and suspension-induced NVH, including 28-V
vibration-canceling engine mounts for the new direct-injection 3.5-L V6.
The front suspension is on a lighter but more rigid subframe, and the shock
absorbers have a triple-path mounting to better diffuse road surface inputs
to the body. The steering shaft now is a single piece, providing a level of
rigidity that raised the natural frequency of vibration into the body from
47 to 80 Hz, outside the sensing range. The damper coupling previously used
was eliminated, as engineers found that the electric motor system provides a
similar effect.
The rear suspension also makes a considerable contribution to reduced
vibration into the body. The trailing arm with five mounting points per side
was replaced by a multilink, with just three, but to locations that are 67%
more rigid. Additionally, the subframe mounts' locations are much stiffer,
and at two points incorporate liquid-filled (glycol) bushings. The rear
subframe also incorporates stays (metal brackets) in four locations to
reduce axle "float" during steering inputs, so the new MDX tracks better.
Further, the rear shock absorber mount was relocated from the relatively
thin wheelhouse (even with a stiffener) to the very rigid frame.
Trim levels wouldn't appear to be a factor, but the Advanced level on the
MDX gets such NVH lowering additions as a thicker rubber noise barrier layer
in the carpeting and use of more noise-reducing insulation, including in
the fender liner.
AWD upgrades
Acura's active Super-Handling AWD system actually can transfer torque side
to side vs. the simpler, more limited effect from using the anti-lock brake
system to reduce torque to one side. However, both will be used on the 2014
MDX, working in sequence.
SH-AWD is more effective on acceleration through a turn, but in normal
driving, the vehicle first slows down as it enters a turn. So the MDX starts
with torque vectoring by brake and maintains it up to the approximate
midpoint of a turn and then changes to the SH system of active torque
transfer as the vehicle begins to accelerate through it.
L*******a
发帖数: 1693
2
应试教育啊,只求测试成绩好,不求实际碰撞成绩好
怪不得每次撞车挂了,日托纷纷解释没撞对地方,碰撞速度不对。。。
1 (共1页)
进入Automobile版参与讨论
相关主题
MDX和XC90那个更安全?想买个儿童安全座椅,求推荐
MDX 2014 IIHS Top Safety Pick+实践出真知 日本车真的不安全吗?
2014 Acura MDX主要缺点有哪些?国内开始认为本田安全了?世界第一15度角碰撞实验
丰田好好做做功课可以获得好成绩,新爬坡王HL是A,GC是MVolvo的独门绝技被Subaru抄袭了!
性价比最高的7座SUVvolvo XC90, MDX , Buick Enclave 选哪个?
Motortrend 2014 Acura MDX SH-AWD Long-Term Verdict有人买 MB R350 么
2016年本田Civic轿车宣传资料 - 身体MDX Base or Tech
本田卡车结构 够软吗?难道就没有比VOLVO S60更靠谱的Sedan了吗?
相关话题的讨论汇总
话题: mdx话题: body话题: nvh话题: side话题: honda