c*******r
发帖数: 13580 | 1 My old receiver was stolen. The thief cut the wires on the stereo side
rather than the harness side. I took out the harness and tried to figure out
the wiring. Everything looks pretty straight-forward except 4 barrel shaped
parts (see attached pic). They are connected to the 4 speaker + wires.
I wonder if they were needed for the old stereo
and if I need them for the new one. Any ideas? Thanks. |
l**********i
发帖数: 11748 | 2 为啥标题是中文，内容是英文？
out
shaped
【在 c*******r 的大作中提到】
: My old receiver was stolen. The thief cut the wires on the stereo side
: rather than the harness side. I took out the harness and tried to figure out
: the wiring. Everything looks pretty straight-forward except 4 barrel shaped
: parts (see attached pic). They are connected to the 4 speaker + wires.
: I wonder if they were needed for the old stereo
: and if I need them for the new one. Any ideas? Thanks.
|
e*******l
发帖数: 1269 | 3 这个多半是上一次装音响的时候留下的，看形状象电容。 |
t*****g
发帖数: 7455 | 4 Speaker Saver iec cap
保护喇叭的电容 |
c*******r
发帖数: 13580 | 5 thanks.
【在 t*****g 的大作中提到】
: Speaker Saver iec cap
: 保护喇叭的电容
|
s********e
发帖数: 4064 | 6 磁圈，滤除高频或脉冲电流的
out
shaped
【在 c*******r 的大作中提到】
: My old receiver was stolen. The thief cut the wires on the stereo side
: rather than the harness side. I took out the harness and tried to figure out
: the wiring. Everything looks pretty straight-forward except 4 barrel shaped
: parts (see attached pic). They are connected to the 4 speaker + wires.
: I wonder if they were needed for the old stereo
: and if I need them for the new one. Any ideas? Thanks.
|
w**e
发帖数: 2424 | |
