i******t
发帖数: 11048 | 1 one of the guiding pin without the boot is stuck.
It should be able move in-and-out freely.
any suggestion to take the pin out and replace new ones? |
i******t
发帖数: 11048 | 2 here is the picture
【在 i******t 的大作中提到】
: one of the guiding pin without the boot is stuck.
: It should be able move in-and-out freely.
: any suggestion to take the pin out and replace new ones?
|
v*****z
发帖数: 3067 | 3 tight in the bench and hammer it. |
i******t
发帖数: 11048 | 4 昨天用torch加热了一下，喷了N次的WD-40
最后用上了超级vice grip，终于把这个pin从bushing里面弄出来了
还算幸运，可以把bracket 卸下来，要是在车底下就没有那么容易卸了。
在autozone买了2个pin,10块多，装上去一看，比原来的bushing小一点点。
只能往里面多摸点grease，反正也是老车了，不准备多花钱了。
晚上上几张照片。
tips:
昨天第一次用torch, already heat the house where the pin get stuck
don't heat the pin itself
热胀冷缩的道理，大家都懂得。
【在 i******t 的大作中提到】
: one of the guiding pin without the boot is stuck.
: It should be able move in-and-out freely.
: any suggestion to take the pin out and replace new ones?
|
