A*****t
发帖数: 306 | 1 修车的说换新要$500+
要过inspection还要换tie rod end和ball joint，总共要$1k+了
我的ford小破车估计都值不了$2k，犹豫要不要修啊 |
s****u
发帖数: 483 | 2 买新车
trade in
【在 A*****t 的大作中提到】
: 修车的说换新要$500+
: 要过inspection还要换tie rod end和ball joint，总共要$1k+了
: 我的ford小破车估计都值不了$2k，犹豫要不要修啊
|
a*****t
发帖数: 221 | 3
FYI,I just changed tie rod end around $130 by mechanic and sway bar links
by myself. I will change muffler, very likely by myself:) Here is the
price I put on the new muffler : center part,$60; rear part $72 (total:
$132)
BTW, my car 2002 ford focus. To save bucks, you may have to buy your own
parts.
【在 A*****t 的大作中提到】
: 修车的说换新要$500+
: 要过inspection还要换tie rod end和ball joint，总共要$1k+了
: 我的ford小破车估计都值不了$2k，犹豫要不要修啊
|
A*****t
发帖数: 306 | 4 Thank you very much.
baozi sent
【在 a*****t 的大作中提到】
:
: FYI,I just changed tie rod end around $130 by mechanic and sway bar links
: by myself. I will change muffler, very likely by myself:) Here is the
: price I put on the new muffler : center part,$60; rear part $72 (total:
: $132)
: BTW, my car 2002 ford focus. To save bucks, you may have to buy your own
: parts.
|
B*****9
发帖数: 245 | |
s*******t
发帖数: 2896 | 6 几年的ford？tie rod end和ball joint如果晃得不厉害，打点润滑油进去又能开两年
。有fitting的就爽
了，没有fitting的只能用针头。工具20$不到。都不用撑车，方向盘打到底，ball
joint和outer tie
rod end就露出来了。
muffler没搞过，没diy经验估计搞不来。
【在 A*****t 的大作中提到】
: 修车的说换新要$500+
: 要过inspection还要换tie rod end和ball joint，总共要$1k+了
: 我的ford小破车估计都值不了$2k，犹豫要不要修啊
|
