b*e 发帖数: 3845 | 1 作为版主应把网球器材发扬光大,不能误导群众啊 @_@ |
|
n*********e 发帖数: 25274 | 2 我听说还有哥们把拍子给绑裂的故事呢,据说是一边吃力太大,不平衡了... |
|
d****y 发帖数: 1671 | 3 Stringing is among the easiest tasks - similar to cutting grass or fix a
toilet.
LZ must not do nothing at home. |
|
K****D 发帖数: 30533 | 4 I am actually very good at fixing toilet... |
|
j*****A 发帖数: 1395 | 5 这种机会极少。我穿过至少150次以上,只碰到一次把别人的拍子搞坏了,不过那个拍
子事先就有裂缝。 |
|
|
|
|
|
|
|
J***e 发帖数: 283 | 12 dont give up just yet, u will get better and better |
|
|
a*m 发帖数: 6253 | 14 这简直是餐具了。。。
这个根本不影响,当然其实你可以当时就解开重新打结。
这个只要不是在中间就没关系。。。
BSO细皮嫩肉。。。
看来你LD阻止你买穿线机还是英明的,她对你的能力十分了解啊。。。 |
|
|
|
K****D 发帖数: 30533 | 17 哦,你一提偶想起来了。一开始两个固定拍子用的竖杆偶只固定了一个,
结果上磅之后听到怪声,后来咣一声整个拍子被拽动了。即使这样也没能
崩裂。 |
|
a**s 发帖数: 9606 | 18 唉, 昨天俺在穿线时还在想是不是录下来让你看看怎么穿. 后来嫌麻烦
就算了. 没想到你不可救药, 录了估计也是白搭 |
|
g*****y 发帖数: 7271 | 19 就是拍子种类太多了,要重复形成muscle memory太难了,呵呵 |
|
g*****y 发帖数: 7271 | 20 这种拍子去哪里找string pattern info啊?怎么知道要剪多长的线呢? |
|
|
d*g 发帖数: 16592 | 22 我主要都是蹦一种拍子,所以很快就熟了,不要脑子了,
不过手好像不够handy,一直速度还是那么慢,最快75分钟,一般如果开着电视,大概
就90分钟以上了。 |
|
|
m*****r 发帖数: 3822 | 24 小学劳技课及格了吗?这些错误应该第一次就解决了啊
而且根据你这个情况,2个小时有点短了,再慢点吧。 |
|
s*********d 发帖数: 2406 | 25 我要说两个问题
第一个固定夹的stringing machine 比这个你得那个 快很多,好穿很多
第二个你得拍子太旧, string guide 估计不一定有
有的话,知道在哪那会这么容易就出错 |
|
g*****y 发帖数: 7271 | 26 He is hopeless. None of your suggestion can prevent his error. |
|
|
G**U 发帖数: 5492 | 28 你每次放砣都要和地面平行,而且要压一下,保证磅数到. |
|
K****D 发帖数: 30533 | 29 前者偶做到了。
后者,不是说不能压么?说是容易损坏拍子? |
|
G**U 发帖数: 5492 | 30 一点点,拍子比你想象的牢.如果还能垂就说明磅数不到 |
|
h*******s 发帖数: 8454 | 31 不理解为什么要压。。。
不过我觉得你的磅数有问题?可能不准?
找个有能测磅数的测一下? |
|
e***y 发帖数: 1443 | 32 还有一般店里至少都是crank,crank的磅数比dropweight要靠谱,所以建议提高个3磅
吧 |
|
|
|
t*********r 发帖数: 630 | 35 drop weight tennis stringer - Silent partner, bought it 5 or 6 years ago and
couldn't find the manual online anymore.
I wonder if drop weight stringer need tensions calibrate. I always think my
tension is looser than what the scale shows. So I string it much higher than
most of you guys, about 72lb.
I have used Syn Gut until recently. I have prince speedport red open frame. |
|
d****t 发帖数: 1284 | 36 tension really is just for reference only, if it feels good if you string at
72lbs on that particular machine, then just keep doing it.
my machine is very loose too, i have to string mine at 69lbs, which probably
equal to 55lbs or lower from a pro shop machine. |
|
t*********r 发帖数: 630 | 37 thx for quick response. but want to get more specific. So drop weight
stringers do need tension adjustment? The scale on it should mean sth
afterall.
BTW, you have very nice ground strokes. Very relax and with power. |
|
a*****0 发帖数: 6788 | 38 Gravity hasn't changed so nothing needs to be calibrated for a drop weight
stringer in terms of the pull from the arm.
The problem with the machine itself, if there's one, may be in the clamps.
Maybe the string slips when you clamp on it. Put your finger on the string
right next to the clamp when you unwind the arm, and feel if the string
slips a bit or not. |
|
t****i 发帖数: 4225 | 39 based on what I read so far, you don't need calibrate on drop weight machine
. It is simply physics.
and
my
than
. |
|
t*********r 发帖数: 630 | 40 I paid some attention to this fly clamp thing as well. Those black letters
on the string keep in place while I unwind. So it probably fine.
string |
|
o**h 发帖数: 246 | 41 agree! clean your clamps with acetone before every stringing job.
string |
|
t*********r 发帖数: 630 | 42 That is what I thought.
When I ask for string job in pro-shop, at least I would like to know my real
tension preference.....That is my concern.
What is the real tension.
thanks for reply.
machine |
|
a*****0 发帖数: 6788 | 43 Then I think the problem is... you! |
|
t*********r 发帖数: 630 | 44 Do you use drop weight stringer to string? How to avoid the string tension
loss of the human factor?
I was thinking about the string (syn guy). it is kind of stretchy. Do you
wait for the weight to get to the level for several second or you
immediately clamp it.
Any other DIY stringers have the same concerns? |
|
t*********r 发帖数: 630 | 45 That is my concern. My string tension is not right |
|
a**s 发帖数: 9606 | 46 if consistant, then why care? |
|
d****t 发帖数: 1284 | 47 the problem with drop weight machine is, it's only pulling the string at the
set tension when the bar is horizontal, the tension will be off if it's not
. so to calibrate, you first have to make sure the bar of horizontal first.
if you have to set the tension way higher than usual, then you should check
your clamp or tensioner to see if the string is slipping.
in my case, the clamps move in their bases to much, but i can adjust by
setting the reference tension higher, so i didn't bother try to f... 阅读全帖 |
|
M***x 发帖数: 288 | 48 Have u heard about an app on iphone(ipad) called RacquetTune? It is really
accurate.
I strung my racket at 55lbs, the app shows the tension is 54.8lbs. |
|
a**s 发帖数: 9606 | 49 how an iphone app test string tension? by sound? |
|
|